Re: [PATCH 2/4] arm64: dts: ls1028a: add missing sai nodes

[Shawn Guo]

On Sat, Nov 23, 2019 at 09:13:15PM +0100, Michael Walle wrote:
> The LS1028A has six SAI cores.
> 
> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> ---
>  .../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 42 +++++++++++++++++++
>  1 file changed, 42 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index f2e71fd57b20..6730922c2d47 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -534,6 +534,20 @@
>  			status = "disabled";
>  		};
>  
> +		sai3: audio-controller@f120000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf120000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 8>,
> +			       <&edma0 1 7>;
> +			status = "disabled";
> +		};
> +
>  		sai4: audio-controller@f130000 {
>  			#sound-dai-cells = <0>;
>  			compatible = "fsl,vf610-sai";
> @@ -548,6 +562,34 @@
>  			status = "disabled";
>  		};
>  
> +		sai5: audio-controller@f140000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf140000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 12>,
> +			       <&edma0 1 11>;
> +			status = "disabled";
> +		};
> +
> +		sai6: audio-controller@f150000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf150000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 14>,
> +			       <&edma0 1 13>;
> +			status = "disabled";
> +		};
> +
>  		tmu: tmu@1f00000 {

Not sure what your base is, but I have tmu@1f80000.  And that makes
the patch applying fail here.

Shawn

>  			compatible = "fsl,qoriq-tmu";
>  			reg = <0x0 0x1f80000 0x0 0x10000>;
> -- 
> 2.20.1
>