[PATCH 09/13] dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
From: Kishon Vijay Abraham I
Date: Mon Dec 09 2019 - 04:21:26 EST
Add host mode dt-bindings for TI's J721E SoC.
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
.../bindings/pci/ti,j721e-pci-host.yaml | 161 ++++++++++++++++++
1 file changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
new file mode 100644
index 000000000000..96184e1f419f
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
@@ -0,0 +1,161 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/ti,j721e-pci-host.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E PCI Host (PCIe Wrapper)
+
+maintainers:
+ - Kishon Vijay Abraham I <kishon@xxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - ti,j721e-pcie-host
+
+ reg:
+ maxItems: 4
+
+ reg-names:
+ items:
+ - const: intd_cfg
+ - const: user_cfg
+ - const: reg
+ - const: cfg
+
+ ti,syscon-pcie-ctrl:
+ description: Phandle to the SYSCON entry required for configuring PCIe mode
+ and link speed.
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/phandle
+
+ max-link-speed:
+ minimum: 1
+ maximum: 3
+
+ num-lanes:
+ minimum: 1
+ maximum: 2
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+ description: clock-specifier to represent input to the PCIe
+
+ clock-names:
+ items:
+ - const: fck
+
+ "#address-cells":
+ const: 3
+
+ "#size-cells":
+ const: 2
+
+ bus-range:
+ description: Range of bus numbers associated with this controller.
+
+ cdns,max-outbound-regions:
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/int32
+ - enum: [16]
+
+ cdns,no-bar-match-nbits:
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/int32
+ - enum: [64]
+
+ vendor-id:
+ const: 0x104c
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+ device-id:
+ const: 0xb00d
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+ msi-map: true
+
+ dma-coherent:
+ description: Indicates that the PCIe IP block can ensure the coherency
+
+ ranges: true
+
+ reset-gpios:
+ description: GPIO specifier for the PERST# signal
+
+ phys:
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+ phy-names:
+ description: As defined in
+ Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - ti,syscon-pcie-ctrl
+ - max-link-speed
+ - num-lanes
+ - power-domains
+ - clocks
+ - clock-names
+ - "#address-cells"
+ - "#size-cells"
+ - bus-range
+ - cdns,max-outbound-regions
+ - cdns,no-bar-match-nbits
+ - vendor-id
+ - device-id
+ - msi-map
+ - dma-coherent
+ - ranges
+ - reset-gpios
+ - phys
+ - phy-names
+
+examples:
+ - |
+ #include <dt-bindings/soc/ti,sci_pm_domain.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+
+ pcie0_rc: pcie@2900000 {
+ compatible = "ti,j721e-pcie-host";
+ reg = <0x00 0x02900000 0x00 0x1000>,
+ <0x00 0x02907000 0x00 0x400>,
+ <0x00 0x0d000000 0x00 0x00800000>,
+ <0x00 0x10000000 0x00 0x00001000>;
+ reg-names = "intd_cfg", "user_cfg", "reg", "cfg";
+ ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
+ max-link-speed = <3>;
+ num-lanes = <2>;
+ power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 239 1>;
+ clock-names = "fck";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x0 0xf>;
+ cdns,max-outbound-regions = <16>;
+ cdns,no-bar-match-nbits = <64>;
+ vendor-id = /bits/ 16 <0x104c>;
+ device-id = /bits/ 16 <0xb00d>;
+ msi-map = <0x0 &gic_its 0x0 0x10000>;
+ dma-coherent;
+ reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
+ phys = <&serdes0_pcie_link>;
+ phy-names = "pcie_phy";
+ ranges = <0x01000000 0x0 0x10001000 0x00 0x10001000 0x0 0x0010000>,
+ <0x02000000 0x0 0x10011000 0x00 0x10011000 0x0 0x7fef000>;
+ };
--
2.17.1