[PATCH] regulator: rk808: Lower log level on optional GPIOs being not available

[Miquel Raynal]

RK808 can leverage a couple of GPIOs to tweak the ramp rate during DVS
(Dynamic Voltage Scaling). These GPIOs are entirely optional but a
dev_warn() appeared when cleaning this driver to use a more up-to-date
gpiod API. At least reduce the log level to 'info' as it is totally
fine to not populate these GPIO on a hardware design.

This change is trivial but it is worth not polluting the logs during
bringup phase by having real warnings and errors sorted out
correctly.

Fixes: a13eaf02e2d6 ("regulator: rk808: make better use of the gpiod API")
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Link: https://lore.kernel.org/r/20191203164709.11127-1-miquel.raynal@xxxxxxxxxxx
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/regulator/rk808-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 5b4003226484..31f79fda3238 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1282,7 +1282,7 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
 		}
 
 		if (!pdata->dvs_gpio[i]) {
-			dev_warn(dev, "there is no dvs%d gpio\n", i);
+			dev_info(dev, "there is no dvs%d gpio\n", i);
 			continue;
 		}
 
-- 
2.20.1