[PATCH 3/6] input: elants: support common touchscreen DT properties

[MichaÅ MirosÅaw]

Support common DT properties like axis inversions to complement
information obtained from device's firmware.

Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
---
 drivers/input/touchscreen/elants_i2c.c | 27 ++++++++++++++------------
 1 file changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
index eadd26d5a06f..02bd5e3e2171 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -31,6 +31,7 @@
 #include <linux/buffer_head.h>
 #include <linux/slab.h>
 #include <linux/firmware.h>
+#include <linux/input/touchscreen.h>
 #include <linux/input/mt.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
@@ -146,8 +147,7 @@ struct elants_data {
 	u16 hw_version;
 	unsigned int x_res;	/* resolution in units/mm */
 	unsigned int y_res;
-	unsigned int x_max;
-	unsigned int y_max;
+	struct touchscreen_properties prop;
 
 	enum elants_state state;
 	enum elants_iap_mode iap_mode;
@@ -498,10 +498,10 @@ static int elants_i2c_query_ts_info(struct elants_data *ts)
 			 rows, cols, osr);
 	} else {
 		/* translate trace number to TS resolution */
-		ts->x_max = ELAN_TS_RESOLUTION(rows, osr);
-		ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x);
-		ts->y_max = ELAN_TS_RESOLUTION(cols, osr);
-		ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y);
+		ts->prop.max_x = ELAN_TS_RESOLUTION(rows, osr);
+		ts->x_res = DIV_ROUND_CLOSEST(ts->prop.max_x, phy_x);
+		ts->prop.max_y = ELAN_TS_RESOLUTION(cols, osr);
+		ts->y_res = DIV_ROUND_CLOSEST(ts->prop.max_y, phy_y);
 	}
 
 	return 0;
@@ -833,8 +833,7 @@ static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf,
 
 			input_mt_slot(input, i);
 			input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
-			input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
-			input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+			touchscreen_report_pos(input, &ts->prop, x, y, true);
 			input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w);
 
@@ -1251,13 +1250,15 @@ static int elants_i2c_probe(struct i2c_client *client,
 	ts->input->name = "Elan Touchscreen";
 	ts->input->id.bustype = BUS_I2C;
 
+	touchscreen_parse_properties(ts->input, true, &ts->prop);
+
 	__set_bit(BTN_TOUCH, ts->input->keybit);
 	__set_bit(EV_ABS, ts->input->evbit);
 	__set_bit(EV_KEY, ts->input->evbit);
 
 	/* Single touch input params setup */
-	input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
-	input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_X, 0, ts->prop.max_x, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, ts->prop.max_y, 0, 0);
 	input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
 	input_abs_set_res(ts->input, ABS_X, ts->x_res);
 	input_abs_set_res(ts->input, ABS_Y, ts->y_res);
@@ -1271,8 +1272,10 @@ static int elants_i2c_probe(struct i2c_client *client,
 		return error;
 	}
 
-	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
-	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_POSITION_X,
+			     0, ts->prop.max_x, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_POSITION_Y,
+			     0, ts->prop.max_y, 0, 0);
 	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
 	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
-- 
2.20.1