Re: [PATCH v3 2/4] devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()

[Chanwoo Choi]

On 12/9/19 7:49 PM, Artur ÅwigoÅ wrote:
> This patch adds a new static function, exynos_bus_profile_init_passive(),
> extracted from exynos_bus_probe().
> 
> Signed-off-by: Artur ÅwigoÅ <a.swigon@xxxxxxxxxxx>
> ---
>  drivers/devfreq/exynos-bus.c | 70 +++++++++++++++++++++---------------
>  1 file changed, 42 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
> index b8ca6b9f4b82..19d9f9f8ced2 100644
> --- a/drivers/devfreq/exynos-bus.c
> +++ b/drivers/devfreq/exynos-bus.c
> @@ -345,13 +345,51 @@ static int exynos_bus_profile_init(struct exynos_bus *bus,
>  	return ret;
>  }
>  
> +static int exynos_bus_profile_init_passive(struct exynos_bus *bus,
> +					   struct devfreq_dev_profile *profile)
> +{
> +	struct device *dev = bus->dev;
> +	struct devfreq_passive_data *passive_data;
> +	struct devfreq *parent_devfreq;
> +	int ret = 0;
> +
> +	/* Initialize the struct profile and governor data for passive device */
> +	profile->target = exynos_bus_target;
> +	profile->exit = exynos_bus_passive_exit;
> +
> +	/* Get the instance of parent devfreq device */
> +	parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
> +	if (IS_ERR(parent_devfreq)) {
> +		ret = -EPROBE_DEFER;
> +		goto err;
> +	}
> +
> +	passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
> +	if (!passive_data) {
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +	passive_data->parent = parent_devfreq;
> +
> +	/* Add devfreq device for exynos bus with passive governor */
> +	bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
> +						passive_data);
> +	if (IS_ERR(bus->devfreq)) {
> +		dev_err(dev,
> +			"failed to add devfreq dev with passive governor\n");
> +		ret = PTR_ERR(bus->devfreq);
> +		goto err;
> +	}
> +
> +err:
> +	return ret;
> +}
> +
>  static int exynos_bus_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct device_node *np = dev->of_node, *node;
>  	struct devfreq_dev_profile *profile;
> -	struct devfreq_passive_data *passive_data;
> -	struct devfreq *parent_devfreq;
>  	struct exynos_bus *bus;
>  	int ret, max_state;
>  	unsigned long min_freq, max_freq;
> @@ -397,33 +435,9 @@ static int exynos_bus_probe(struct platform_device *pdev)
>  
>  	goto out;
>  passive:
> -	/* Initialize the struct profile and governor data for passive device */
> -	profile->target = exynos_bus_target;
> -	profile->exit = exynos_bus_passive_exit;
> -
> -	/* Get the instance of parent devfreq device */
> -	parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
> -	if (IS_ERR(parent_devfreq)) {
> -		ret = -EPROBE_DEFER;
> +	ret = exynos_bus_profile_init_passive(bus, profile);
> +	if (ret < 0)
>  		goto err;
> -	}
> -
> -	passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
> -	if (!passive_data) {
> -		ret = -ENOMEM;
> -		goto err;
> -	}
> -	passive_data->parent = parent_devfreq;
> -
> -	/* Add devfreq device for exynos bus with passive governor */
> -	bus->devfreq = devm_devfreq_add_device(dev, profile, DEVFREQ_GOV_PASSIVE,
> -						passive_data);
> -	if (IS_ERR(bus->devfreq)) {
> -		dev_err(dev,
> -			"failed to add devfreq dev with passive governor\n");
> -		ret = PTR_ERR(bus->devfreq);
> -		goto err;
> -	}
>  
>  out:
>  	max_state = bus->devfreq->profile->max_state;
> 

Applied it. Thanks.


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics