[PATCH v3 05/13] phy: usb: Restructure in preparation for adding 7216 USB support

From: Al Cooper
Date: Tue Dec 10 2019 - 08:23:50 EST

The driver is being restructured in preparation for adding support
for the new Synopsis USB conroller on the 7216. Since all the bugs
and work-arounds in previous STB chips are supposed to be fixed,
most of the code in phy-brcm-usb-init.c is not needed. Instead of
adding more complexity to the already complicated phy-brcm-usb-init.c
module, the driver will be restructured to use a vector table to
dispatch into different C modules for the different controllers.

There was also some general cleanup done including some ipp setup
code that was incorrect.

Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
---
drivers/phy/broadcom/phy-brcm-usb-init.c | 191 ++++++++++-------------
drivers/phy/broadcom/phy-brcm-usb-init.h | 140 +++++++++++++++--
drivers/phy/broadcom/phy-brcm-usb.c | 6 +-
3 files changed, 214 insertions(+), 123 deletions(-)

diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.c b/drivers/phy/broadcom/phy-brcm-usb-init.c
index 58882c10396a..80d6f54d276e 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.c
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.c
@@ -129,10 +129,6 @@ enum {
USB_CTRL_SELECTOR_COUNT,
};

-#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg)
-#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
-#define USB_CTRL_MASK(reg, field) \
- USB_CTRL_##reg##_##field##_MASK
#define USB_CTRL_MASK_FAMILY(params, reg, field) \
(params->usb_reg_bits_map[USB_CTRL_##reg##_##field##_SELECTOR])

@@ -143,13 +139,6 @@ enum {
usb_ctrl_unset_family(params, USB_CTRL_##reg, \
USB_CTRL_##reg##_##field##_SELECTOR)

-#define USB_CTRL_SET(base, reg, field) \
- usb_ctrl_set(USB_CTRL_REG(base, reg), \
- USB_CTRL_##reg##_##field##_MASK)
-#define USB_CTRL_UNSET(base, reg, field) \
- usb_ctrl_unset(USB_CTRL_REG(base, reg), \
- USB_CTRL_##reg##_##field##_MASK)
-
#define MDIO_USB2 0
#define MDIO_USB3 BIT(31)

@@ -405,26 +394,14 @@ usb_reg_bits_map_table[BRCM_FAMILY_COUNT][USB_CTRL_SELECTOR_COUNT] = {
},
};

-static inline u32 brcmusb_readl(void __iomem *addr)
-{
- return readl(addr);
-}
-
-static inline void brcmusb_writel(u32 val, void __iomem *addr)
-{
- writel(val, addr);
-}
-
static inline
void usb_ctrl_unset_family(struct brcm_usb_init_params *params,
u32 reg_offset, u32 field)
{
u32 mask;
- void __iomem *reg;

mask = params->usb_reg_bits_map[field];
- reg = params->ctrl_regs + reg_offset;
- brcmusb_writel(brcmusb_readl(reg) & ~mask, reg);
+ brcm_usb_ctrl_unset(params->ctrl_regs + reg_offset, mask);
};

static inline
@@ -432,45 +409,27 @@ void usb_ctrl_set_family(struct brcm_usb_init_params *params,
u32 reg_offset, u32 field)
{
u32 mask;
- void __iomem *reg;

mask = params->usb_reg_bits_map[field];
- reg = params->ctrl_regs + reg_offset;
- brcmusb_writel(brcmusb_readl(reg) | mask, reg);
+ brcm_usb_ctrl_set(params->ctrl_regs + reg_offset, mask);
};

-static inline void usb_ctrl_set(void __iomem *reg, u32 field)
-{
- u32 value;
-
- value = brcmusb_readl(reg);
- brcmusb_writel(value | field, reg);
-}
-
-static inline void usb_ctrl_unset(void __iomem *reg, u32 field)
-{
- u32 value;
-
- value = brcmusb_readl(reg);
- brcmusb_writel(value & ~field, reg);
-}
-
static u32 brcmusb_usb_mdio_read(void __iomem *ctrl_base, u32 reg, int mode)
{
u32 data;

data = (reg << 16) | mode;
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
data |= (1 << 24);
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
data &= ~(1 << 24);
/* wait for the 60MHz parallel to serial shifter */
usleep_range(10, 20);
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
/* wait for the 60MHz parallel to serial shifter */
usleep_range(10, 20);

- return brcmusb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
+ return brcm_usb_readl(USB_CTRL_REG(ctrl_base, MDIO2)) & 0xffff;
}

static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
@@ -479,14 +438,14 @@ static void brcmusb_usb_mdio_write(void __iomem *ctrl_base, u32 reg,
u32 data;

data = (reg << 16) | val | mode;
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
data |= (1 << 25);
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
data &= ~(1 << 25);

/* wait for the 60MHz parallel to serial shifter */
usleep_range(10, 20);
- brcmusb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
+ brcm_usb_writel(data, USB_CTRL_REG(ctrl_base, MDIO));
/* wait for the 60MHz parallel to serial shifter */
usleep_range(10, 20);
}
@@ -713,12 +672,12 @@ static void brcmusb_usb3_otp_fix(struct brcm_usb_init_params *params)

if (params->family_id != 0x74371000 || !xhci_ec_base)
return;
- brcmusb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
- val = brcmusb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+ brcm_usb_writel(0xa20c, USB_XHCI_EC_REG(xhci_ec_base, IRAADR));
+ val = brcm_usb_readl(USB_XHCI_EC_REG(xhci_ec_base, IRADAT));

/* set cfg_pick_ss_lock */
val |= (1 << 27);
- brcmusb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));
+ brcm_usb_writel(val, USB_XHCI_EC_REG(xhci_ec_base, IRADAT));

/* Reset USB 3.0 PHY for workaround to take effect */
USB_CTRL_UNSET(params->ctrl_regs, USB30_CTL1, PHY3_RESETB);
@@ -751,7 +710,7 @@ static void brcmusb_xhci_soft_reset(struct brcm_usb_init_params *params,
* - default chip/rev.
* NOTE: The minor rev is always ignored.
*/
-static enum brcm_family_type brcmusb_get_family_type(
+static enum brcm_family_type get_family_type(
struct brcm_usb_init_params *params)
{
int last_type = -1;
@@ -779,7 +738,7 @@ static enum brcm_family_type brcmusb_get_family_type(
return last_type;
}

-void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
+static void usb_init_ipp(struct brcm_usb_init_params *params)
{
void __iomem *ctrl = params->ctrl_regs;
u32 reg;
@@ -795,7 +754,7 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
USB_CTRL_SET_FAMILY(params, USB30_CTL1, USB3_IPP);
}

- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
orig_reg = reg;
if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_CC_DRD_MODE_ENABLE_SEL))
/* Never use the strap, it's going away. */
@@ -803,8 +762,8 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
SETUP,
STRAP_CC_DRD_MODE_ENABLE_SEL));
if (USB_CTRL_MASK_FAMILY(params, SETUP, STRAP_IPP_SEL))
+ /* override ipp strap pin (if it exits) */
if (params->ipp != 2)
- /* override ipp strap pin (if it exits) */
reg &= ~(USB_CTRL_MASK_FAMILY(params, SETUP,
STRAP_IPP_SEL));

@@ -812,54 +771,26 @@ void brcm_usb_init_ipp(struct brcm_usb_init_params *params)
reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
if (params->ioc)
reg |= USB_CTRL_MASK(SETUP, IOC);
- if (params->ipp == 1 && ((reg & USB_CTRL_MASK(SETUP, IPP)) == 0))
+ if (params->ipp == 1)
reg |= USB_CTRL_MASK(SETUP, IPP);
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

/*
* If we're changing IPP, make sure power is off long enough
* to turn off any connected devices.
*/
- if (reg != orig_reg)
+ if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
msleep(50);
}

-int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params)
-{
- void __iomem *ctrl = params->ctrl_regs;
- u32 reg = 0;
-
- if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
- PORT_MODE);
- }
- return reg;
-}
-
-void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
- int mode)
-{
- void __iomem *ctrl = params->ctrl_regs;
- u32 reg;
-
- if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
- PORT_MODE);
- reg |= mode;
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
- }
-}
-
-void brcm_usb_init_common(struct brcm_usb_init_params *params)
+static void usb_init_common(struct brcm_usb_init_params *params)
{
u32 reg;
void __iomem *ctrl = params->ctrl_regs;

/* Clear any pending wake conditions */
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_PM_STATUS));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_PM_STATUS));

/* Take USB out of power down */
if (USB_CTRL_MASK_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN)) {
@@ -885,7 +816,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
/* Block auto PLL suspend by USB2 PHY (Sasi) */
USB_CTRL_SET(ctrl, PLL_CTL, PLL_SUSPEND_EN);

- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
if (params->selected_family == BRCM_FAMILY_7364A0)
/* Suppress overcurrent indication from USB30 ports for A0 */
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, OC3_DISABLE);
@@ -901,16 +832,16 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB1_EN);
if (USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN))
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, SCB2_EN);
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

brcmusb_memc_fix(params);

if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
PORT_MODE);
reg |= params->mode;
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
}
if (USB_CTRL_MASK_FAMILY(params, USB_PM, BDC_SOFT_RESETB)) {
switch (params->mode) {
@@ -932,7 +863,7 @@ void brcm_usb_init_common(struct brcm_usb_init_params *params)
}
}

-void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
+static void usb_init_eohci(struct brcm_usb_init_params *params)
{
u32 reg;
void __iomem *ctrl = params->ctrl_regs;
@@ -948,10 +879,10 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
USB_CTRL_SET(ctrl, EBRIDGE, ESTOP_SCB_REQ);

/* Setup the endian bits */
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, SETUP));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
reg &= ~USB_CTRL_SETUP_ENDIAN_BITS;
reg |= USB_CTRL_MASK_FAMILY(params, SETUP, ENDIAN);
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, SETUP));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

if (params->selected_family == BRCM_FAMILY_7271A0)
/* Enable LS keep alive fix for certain keyboards */
@@ -962,14 +893,14 @@ void brcm_usb_init_eohci(struct brcm_usb_init_params *params)
* Make the burst size 512 bytes to fix a hardware bug
* on the 7255a0. See HW7255-24.
*/
- reg = brcmusb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, EBRIDGE));
reg &= ~USB_CTRL_MASK(EBRIDGE, EBR_SCB_SIZE);
reg |= 0x800;
- brcmusb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, EBRIDGE));
}
}

-void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
+static void usb_init_xhci(struct brcm_usb_init_params *params)
{
void __iomem *ctrl = params->ctrl_regs;

@@ -997,7 +928,7 @@ void brcm_usb_init_xhci(struct brcm_usb_init_params *params)
brcmusb_usb3_otp_fix(params);
}

-void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
+static void usb_uninit_common(struct brcm_usb_init_params *params)
{
if (USB_CTRL_MASK_FAMILY(params, USB_PM, USB_PWRDN))
USB_CTRL_SET_FAMILY(params, USB_PM, USB_PWRDN);
@@ -1006,17 +937,47 @@ void brcm_usb_uninit_common(struct brcm_usb_init_params *params)
USB_CTRL_SET_FAMILY(params, PLL_CTL, PLL_IDDQ_PWRDN);
}

-void brcm_usb_uninit_eohci(struct brcm_usb_init_params *params)
+static void usb_uninit_eohci(struct brcm_usb_init_params *params)
{
}

-void brcm_usb_uninit_xhci(struct brcm_usb_init_params *params)
+static void usb_uninit_xhci(struct brcm_usb_init_params *params)
{
brcmusb_xhci_soft_reset(params, 1);
USB_CTRL_SET(params->ctrl_regs, USB30_PCTL, PHY3_IDDQ_OVERRIDE);
}

-void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
+static int usb_get_dual_select(struct brcm_usb_init_params *params)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+ u32 reg = 0;
+
+ pr_debug("%s\n", __func__);
+ if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+ PORT_MODE);
+ }
+ return reg;
+}
+
+static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
+{
+ void __iomem *ctrl = params->ctrl_regs;
+ u32 reg;
+
+ pr_debug("%s\n", __func__);
+
+ if (USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1, PORT_MODE)) {
+ reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ reg &= ~USB_CTRL_MASK_FAMILY(params, USB_DEVICE_CTL1,
+ PORT_MODE);
+ reg |= mode;
+ brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
+ }
+}
+
+static void usb_wake_enable(struct brcm_usb_init_params *params,
int enable)
{
void __iomem *ctrl = params->ctrl_regs;
@@ -1027,13 +988,29 @@ void brcm_usb_wake_enable(struct brcm_usb_init_params *params,
USB_CTRL_UNSET(ctrl, USB_PM, RMTWKUP_EN);
}

-void brcm_usb_set_family_map(struct brcm_usb_init_params *params)
+static const struct brcm_usb_init_ops bcm7445_ops = {
+ .init_ipp = usb_init_ipp,
+ .init_common = usb_init_common,
+ .init_eohci = usb_init_eohci,
+ .init_xhci = usb_init_xhci,
+ .uninit_common = usb_uninit_common,
+ .uninit_eohci = usb_uninit_eohci,
+ .uninit_xhci = usb_uninit_xhci,
+ .get_dual_select = usb_get_dual_select,
+ .set_dual_select = usb_set_dual_select,
+ .wake_enable = usb_wake_enable,
+};
+
+void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params)
{
int fam;

- fam = brcmusb_get_family_type(params);
+ pr_debug("%s\n", __func__);
+
+ fam = get_family_type(params);
params->selected_family = fam;
params->usb_reg_bits_map =
&usb_reg_bits_map_table[fam][0];
params->family_name = family_names[fam];
+ params->ops = &bcm7445_ops;
}
diff --git a/drivers/phy/broadcom/phy-brcm-usb-init.h b/drivers/phy/broadcom/phy-brcm-usb-init.h
index f473e0c51f0b..7701872d1136 100644
--- a/drivers/phy/broadcom/phy-brcm-usb-init.h
+++ b/drivers/phy/broadcom/phy-brcm-usb-init.h
@@ -13,6 +13,33 @@

struct brcm_usb_init_params;

+#define USB_CTRL_REG(base, reg) ((void __iomem *)base + USB_CTRL_##reg)
+#define USB_XHCI_EC_REG(base, reg) ((void __iomem *)base + USB_XHCI_EC_##reg)
+#define USB_CTRL_MASK(reg, field) \
+ USB_CTRL_##reg##_##field##_MASK
+#define USB_CTRL_SET(base, reg, field) \
+ brcm_usb_ctrl_set(USB_CTRL_REG(base, reg), \
+ USB_CTRL_##reg##_##field##_MASK)
+#define USB_CTRL_UNSET(base, reg, field) \
+ brcm_usb_ctrl_unset(USB_CTRL_REG(base, reg), \
+ USB_CTRL_##reg##_##field##_MASK)
+
+struct brcm_usb_init_params;
+
+struct brcm_usb_init_ops {
+ void (*init_ipp)(struct brcm_usb_init_params *params);
+ void (*init_common)(struct brcm_usb_init_params *params);
+ void (*init_eohci)(struct brcm_usb_init_params *params);
+ void (*init_xhci)(struct brcm_usb_init_params *params);
+ void (*uninit_common)(struct brcm_usb_init_params *params);
+ void (*uninit_eohci)(struct brcm_usb_init_params *params);
+ void (*uninit_xhci)(struct brcm_usb_init_params *params);
+ int (*get_dual_select)(struct brcm_usb_init_params *params);
+ void (*set_dual_select)(struct brcm_usb_init_params *params, int mode);
+ void (*wake_enable)(struct brcm_usb_init_params *params,
+ int enable);
+};
+
struct brcm_usb_init_params {
void __iomem *ctrl_regs;
void __iomem *xhci_ec_regs;
@@ -24,20 +51,107 @@ struct brcm_usb_init_params {
int selected_family;
const char *family_name;
const u32 *usb_reg_bits_map;
+ const struct brcm_usb_init_ops *ops;
};

-void brcm_usb_set_family_map(struct brcm_usb_init_params *params);
-int brcm_usb_init_get_dual_select(struct brcm_usb_init_params *params);
-void brcm_usb_init_set_dual_select(struct brcm_usb_init_params *params,
- int mode);
-
-void brcm_usb_init_ipp(struct brcm_usb_init_params *ini);
-void brcm_usb_init_common(struct brcm_usb_init_params *ini);
-void brcm_usb_init_eohci(struct brcm_usb_init_params *ini);
-void brcm_usb_init_xhci(struct brcm_usb_init_params *ini);
-void brcm_usb_uninit_common(struct brcm_usb_init_params *ini);
-void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini);
-void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini);
-void brcm_usb_wake_enable(struct brcm_usb_init_params *params, int enable);
+void brcm_usb_dvr_init_7445(struct brcm_usb_init_params *params);
+
+static inline u32 brcm_usb_readl(void __iomem *addr)
+{
+ /*
+ * MIPS endianness is configured by boot strap, which also reverses all
+ * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+ * endian I/O).
+ *
+ * Other architectures (e.g., ARM) either do not support big endian, or
+ * else leave I/O in little endian mode.
+ */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ return __raw_readl(addr);
+ else
+ return readl_relaxed(addr);
+}
+
+static inline void brcm_usb_writel(u32 val, void __iomem *addr)
+{
+ /* See brcmnand_readl() comments */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ __raw_writel(val, addr);
+ else
+ writel_relaxed(val, addr);
+}
+
+static inline void brcm_usb_ctrl_unset(void __iomem *reg, u32 mask)
+{
+ brcm_usb_writel(brcm_usb_readl(reg) & ~(mask), reg);
+};
+
+static inline void brcm_usb_ctrl_set(void __iomem *reg, u32 mask)
+{
+ brcm_usb_writel(brcm_usb_readl(reg) | (mask), reg);
+};
+
+static inline void brcm_usb_init_ipp(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->init_ipp)
+ ini->ops->init_ipp(ini);
+}
+
+static inline void brcm_usb_init_common(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->init_common)
+ ini->ops->init_common(ini);
+}
+
+static inline void brcm_usb_init_eohci(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->init_eohci)
+ ini->ops->init_eohci(ini);
+}
+
+static inline void brcm_usb_init_xhci(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->init_xhci)
+ ini->ops->init_xhci(ini);
+}
+
+static inline void brcm_usb_uninit_common(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->uninit_common)
+ ini->ops->uninit_common(ini);
+}
+
+static inline void brcm_usb_uninit_eohci(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->uninit_eohci)
+ ini->ops->uninit_eohci(ini);
+}
+
+static inline void brcm_usb_uninit_xhci(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->uninit_xhci)
+ ini->ops->uninit_xhci(ini);
+}
+
+static inline void brcm_usb_wake_enable(struct brcm_usb_init_params *ini,
+ int enable)
+{
+ if (ini->ops->wake_enable)
+ ini->ops->wake_enable(ini, enable);
+}
+
+static inline int brcm_usb_get_dual_select(struct brcm_usb_init_params *ini)
+{
+ if (ini->ops->get_dual_select)
+ return ini->ops->get_dual_select(ini);
+ return 0;
+}
+
+static inline void brcm_usb_set_dual_select(struct brcm_usb_init_params *ini,
+ int mode)
+{
+ if (ini->ops->set_dual_select)
+ ini->ops->set_dual_select(ini, mode);
+}

#endif /* _USB_BRCM_COMMON_INIT_H */
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c
index cca04d60f2d2..9d93c5599511 100644
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
@@ -207,7 +207,7 @@ static ssize_t dual_select_store(struct device *dev,
res = name_to_value(&brcm_dual_mode_to_name[0],
ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
if (!res) {
- brcm_usb_init_set_dual_select(&priv->ini, value);
+ brcm_usb_set_dual_select(&priv->ini, value);
res = len;
}
mutex_unlock(&sysfs_lock);
@@ -222,7 +222,7 @@ static ssize_t dual_select_show(struct device *dev,
int value;

mutex_lock(&sysfs_lock);
- value = brcm_usb_init_get_dual_select(&priv->ini);
+ value = brcm_usb_get_dual_select(&priv->ini);
mutex_unlock(&sysfs_lock);
return sprintf(buf, "%s\n",
value_to_name(&brcm_dual_mode_to_name[0],
@@ -331,7 +331,7 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)

priv->ini.family_id = brcmstb_get_family_id();
priv->ini.product_id = brcmstb_get_product_id();
- brcm_usb_set_family_map(&priv->ini);
+ brcm_usb_dvr_init_7445(&priv->ini);
dev_dbg(dev, "Best mapping table is for %s\n",
priv->ini.family_name);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--
2.17.1