Re: [PATCH v5 13/16] rtc: bd70528 add BD71828 support

[Alexandre Belloni]

Hi,

On 18/11/2019 09:00:47+0200, Matti Vaittinen wrote:
> @@ -468,26 +596,35 @@ static int bd70528_probe(struct platform_device *pdev)
>  	 *  leave them enabled as irq-controller should disable irqs
>  	 *  from sub-registers when IRQ is disabled or freed.
>  	 */
> -	ret = regmap_update_bits(mfd->regmap,
> +	if (enable_main_irq) {
> +		ret = regmap_update_bits(mfd->regmap,
>  				 BD70528_REG_INT_MAIN_MASK,
>  				 BD70528_INT_RTC_MASK, 0);
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to enable RTC interrupts\n");
> -		return ret;
> +		if (ret) {
> +			dev_err(&pdev->dev, "Failed to enable RTC interrupts\n");
> +			return ret;
> +		}
>  	}
>  
>  	return rtc_register_device(rtc);
>  }

Missing blank line here.

> +static const struct platform_device_id bd718x7_rtc_id[] = {
> +	{ "bd70528-rtc", ROHM_CHIP_TYPE_BD70528 },
> +	{ "bd71828-rtc", ROHM_CHIP_TYPE_BD71828 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(platform, bd718x7_rtc_id);
>  

Else, Acked-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com