[PATCH v2 4/4] eeprom: at24: remove the write-protect pin support

From: Khouloud Touil
Date: Tue Dec 10 2019 - 10:42:35 EST


NVMEM framework is an interface for the at24 EEPROMs as well as for
other drivers, instead of passing the wp-gpios over the different
drivers each time, it would be better to pass it over the NVMEM
subsystem once and for all.

Removing the support for the write-protect pin after adding it to the
NVMEM subsystem.

Signed-off-by: Khouloud Touil <ktouil@xxxxxxxxxxxx>
---
drivers/misc/eeprom/at24.c | 9 ---------
1 file changed, 9 deletions(-)

diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 0681d5fdd538..8fce49a6d9cd 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -22,7 +22,6 @@
#include <linux/nvmem-provider.h>
#include <linux/regmap.h>
#include <linux/pm_runtime.h>
-#include <linux/gpio/consumer.h>

/* Address pointer is 16 bit. */
#define AT24_FLAG_ADDR16 BIT(7)
@@ -89,8 +88,6 @@ struct at24_data {

struct nvmem_device *nvmem;

- struct gpio_desc *wp_gpio;
-
/*
* Some chips tie up multiple I2C addresses; dummy devices reserve
* them for us, and we'll use them with SMBus calls.
@@ -457,12 +454,10 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
* from this host, but not from other I2C masters.
*/
mutex_lock(&at24->lock);
- gpiod_set_value_cansleep(at24->wp_gpio, 0);

while (count) {
ret = at24_regmap_write(at24, buf, off, count);
if (ret < 0) {
- gpiod_set_value_cansleep(at24->wp_gpio, 1);
mutex_unlock(&at24->lock);
pm_runtime_put(dev);
return ret;
@@ -472,7 +467,6 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
count -= ret;
}

- gpiod_set_value_cansleep(at24->wp_gpio, 1);
mutex_unlock(&at24->lock);

pm_runtime_put(dev);
@@ -662,9 +656,6 @@ static int at24_probe(struct i2c_client *client)
at24->client[0].client = client;
at24->client[0].regmap = regmap;

- at24->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_HIGH);
- if (IS_ERR(at24->wp_gpio))
- return PTR_ERR(at24->wp_gpio);

writable = !(flags & AT24_FLAG_READONLY);
if (writable) {
--
2.17.1