[PATCH v8 09/12] thermal: qoriq: Enable all sensors before registering them

[Andrey Smirnov]

Tmu_get_temp will get called as a part of sensor registration via
devm_thermal_zone_of_sensor_register(). To prevent it from retruning
bogus data we need to enable sensor monitoring before that. Looking at
the datasheet (i.MX8MQ RM) there doesn't seem to be any harm in
enabling them all, so, for the sake of simplicity, change the code to
do just that.

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Tested-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Angus Ainslie (Purism) <angus@xxxxxxxx>
Cc: linux-imx@xxxxxxx
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
 drivers/thermal/qoriq_thermal.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)

diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
index 6227c940b9b0..6c5e53ea7711 100644
--- a/drivers/thermal/qoriq_thermal.c
+++ b/drivers/thermal/qoriq_thermal.c
@@ -29,6 +29,7 @@
 #define TMR_DISABLE	0x0
 #define TMR_ME		0x80000000
 #define TMR_ALPF	0x0c000000
+#define TMR_MSITE_ALL	GENMASK(15, 0)
 
 #define REGS_TMTMIR	0x008	/* Temperature measurement interval Register */
 #define TMTMIR_DEFAULT	0x0000000f
@@ -93,7 +94,15 @@ static const struct thermal_zone_of_device_ops tmu_tz_ops = {
 static int qoriq_tmu_register_tmu_zone(struct device *dev,
 				       struct qoriq_tmu_data *qdata)
 {
-	int id, sites = 0;
+	int id;
+
+	if (qdata->ver == TMU_VER1) {
+		regmap_write(qdata->regmap, REGS_TMR,
+			     TMR_MSITE_ALL | TMR_ME | TMR_ALPF);
+	} else {
+		regmap_write(qdata->regmap, REGS_V2_TMSR, TMR_MSITE_ALL);
+		regmap_write(qdata->regmap, REGS_TMR, TMR_ME | TMR_ALPF_V2);
+	}
 
 	for (id = 0; id < SITES_MAX; id++) {
 		struct thermal_zone_device *tzd;
@@ -109,25 +118,9 @@ static int qoriq_tmu_register_tmu_zone(struct device *dev,
 		if (ret) {
 			if (ret == -ENODEV)
 				continue;
-			else
-				return ret;
-		}
 
-		if (qdata->ver == TMU_VER1)
-			sites |= 0x1 << (15 - id);
-		else
-			sites |= 0x1 << id;
-	}
-
-	/* Enable monitoring */
-	if (sites != 0) {
-		if (qdata->ver == TMU_VER1) {
-			regmap_write(qdata->regmap, REGS_TMR,
-				     sites | TMR_ME | TMR_ALPF);
-		} else {
-			regmap_write(qdata->regmap, REGS_V2_TMSR, sites);
-			regmap_write(qdata->regmap, REGS_TMR,
-				     TMR_ME | TMR_ALPF_V2);
+			regmap_write(qdata->regmap, REGS_TMR, TMR_DISABLE);
+			return ret;
 		}
 	}
 
-- 
2.21.0