[PATCH v2] ARM: dts: vf610-zii-dev-rev-b: Drop redundant I2C properties

[Andrey Smirnov]

ZII VF610 Board Rev. B is supposed to have exactly the same I2C config
as Rev. C, including I2C bus recovery settings. Drop redundant I2C
properties that are already specified in vf610-zii-dev.dtsi

Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Chris Healy <cphealy@xxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---

Changes since [v1]:

    - Reworded commit message to clarify that I2C recovery setttins
      are supposed to apply to both Dev boards

[v1] lore.kernel.org/lkml/20190820031952.14804-1-andrew.smirnov@xxxxxxxxx

 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
index 48086c5e8549..e500911ce0a5 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
@@ -323,11 +323,6 @@
 };
 
 &i2c0 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c0>;
-	status = "okay";
-
 	gpio5: io-expander@20 {
 		compatible = "nxp,pca9554";
 		reg = <0x20>;
@@ -350,11 +345,6 @@
 };
 
 &i2c2 {
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
 	tca9548@70 {
 		compatible = "nxp,pca9548";
 		pinctrl-0 = <&pinctrl_i2c_mux_reset>;
-- 
2.21.0