[PATCH v2 0/4 RESEND] USB3503: correct GPIOs polarity and update the driver
From: Marek Szyprowski
Date: Wed Dec 11 2019 - 09:51:09 EST
A few days ago a patch for USB3503 driver has been posted (see v1 in the
changelog below), which changes the GPIO API used by the driver to the
new one (descriptor based). It turned out that this conversion broke USB
HUB operation on some boards (observed on Arndale5250).
Further analysis revealed that the existing code ignored the GPIO
polarity flags in the device tree. On the other hand the current GPIO
polarity flags used by various boards were simply incorrect, as it was
not possible to test them properly.
This patchset provides some standardisation for the GPIO polarity flags
for USB3503 chips in various DTS files and adds matching logic to USB3503
driver. For more information and rationale behind this approach, see the
thread linked as v1 below.
This patchset has been tested on the following boards:
Odroid X2, U3, XU and Arndale5250.
The patch for USB3503 driver should be merged one release later than the
DTS changes to keep the affected boards working in meantime.
Samsung R&D Institute Poland
- resend reason: missed some important people on CC:
- added DTS fixes, assumed that RESET GPIO should be ACTIVE_LOW and all
other GPIOs ACTIVE_HIGH
- integrated a fixup for USB3503 driver inverting the logic behind the
RESET GPIO to match the standardised GPIOs polarity
- initial version, contains only USB3503 driver patch
Linus Walleij (1):
usb: usb3503: Convert to use GPIO descriptors
Marek Szyprowski (3):
ARM: dts: exynos: Correct USB3503 GPIOs polarity
ARM: dts: qcom: Correct USB3503 GPIOs polarity
ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity
.../boot/dts/exynos4412-odroid-common.dtsi | 2 +-
arch/arm/boot/dts/exynos5250-arndale.dts | 2 +-
arch/arm/boot/dts/exynos5410-odroidxu.dts | 2 +-
.../dts/qcom-mdm9615-wp8548-mangoh-green.dts | 2 +-
.../boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 +-
drivers/usb/misc/usb3503.c | 94 +++++++------------
include/linux/platform_data/usb3503.h | 3 -
7 files changed, 40 insertions(+), 67 deletions(-)