Re: [PATCH net-next 5/6] arm64: dts: mt7622: add mt7531 dsa to mt7622-rfb1 board

[Landen Chao]

On Wed, 2019-12-11 at 00:51 +0800, Andrew Lunn wrote:
> > +				port@6 {
> > +					reg = <6>;
> > +					label = "cpu";
> > +					ethernet = <&gmac0>;
> > +					phy-mode = "2500base-x";
> > +
> > +					fixed-link {
> > +						speed = <2500>;
> > +						full-duplex;
> > +						pause;
> > +					};
> 
> This fixed-link should not be needed. The DSA driver is supposed to
> configure the CPU port to its fastest speed by default. 2500 is
> the fastest speed a 2500Base-X link can do...
I'll add the cpu port logic to use the fastest speed by default.
It also needs to modify the mt753x_phylink_mac_config() logic.

Landen
> 
>     Andrew