Re: [PATCH bpf-next 11/15] bpftool: add skeleton codegen command

From: Stanislav Fomichev
Date: Wed Dec 11 2019 - 15:09:30 EST


On 12/11, Andrii Nakryiko wrote:
> On Wed, Dec 11, 2019 at 11:15 AM Stanislav Fomichev <sdf@xxxxxxxxxxx> wrote:
> >
> > On 12/11, Andrii Nakryiko wrote:
> > > On Wed, Dec 11, 2019 at 9:24 AM Stanislav Fomichev <sdf@xxxxxxxxxxx> wrote:
> > > >
> > > > On 12/10, Andrii Nakryiko wrote:
> > > > > On Tue, Dec 10, 2019 at 2:59 PM Stanislav Fomichev <sdf@xxxxxxxxxxx> wrote:
> > > > > >
> > > > > > On 12/10, Andrii Nakryiko wrote:
> > > > > > > On Tue, Dec 10, 2019 at 1:44 PM Stanislav Fomichev <sdf@xxxxxxxxxxx> wrote:
> > > > > > > >
> > > > > > > > On 12/10, Jakub Kicinski wrote:
> > > > > > > > > On Tue, 10 Dec 2019 09:11:31 -0800, Andrii Nakryiko wrote:
> > > > > > > > > > On Mon, Dec 9, 2019 at 5:57 PM Jakub Kicinski wrote:
> > > > > > > > > > > On Mon, 9 Dec 2019 17:14:34 -0800, Andrii Nakryiko wrote:
> > > > > > > > > > > > struct <object-name> {
> > > > > > > > > > > > /* used by libbpf's skeleton API */
> > > > > > > > > > > > struct bpf_object_skeleton *skeleton;
> > > > > > > > > > > > /* bpf_object for libbpf APIs */
> > > > > > > > > > > > struct bpf_object *obj;
> > > > > > > > > > > > struct {
> > > > > > > > > > > > /* for every defined map in BPF object: */
> > > > > > > > > > > > struct bpf_map *<map-name>;
> > > > > > > > > > > > } maps;
> > > > > > > > > > > > struct {
> > > > > > > > > > > > /* for every program in BPF object: */
> > > > > > > > > > > > struct bpf_program *<program-name>;
> > > > > > > > > > > > } progs;
> > > > > > > > > > > > struct {
> > > > > > > > > > > > /* for every program in BPF object: */
> > > > > > > > > > > > struct bpf_link *<program-name>;
> > > > > > > > > > > > } links;
> > > > > > > > > > > > /* for every present global data section: */
> > > > > > > > > > > > struct <object-name>__<one of bss, data, or rodata> {
> > > > > > > > > > > > /* memory layout of corresponding data section,
> > > > > > > > > > > > * with every defined variable represented as a struct field
> > > > > > > > > > > > * with exactly the same type, but without const/volatile
> > > > > > > > > > > > * modifiers, e.g.:
> > > > > > > > > > > > */
> > > > > > > > > > > > int *my_var_1;
> > > > > > > > > > > > ...
> > > > > > > > > > > > } *<one of bss, data, or rodata>;
> > > > > > > > > > > > };
> > > > > > > > > > >
> > > > > > > > > > > I think I understand how this is useful, but perhaps the problem here
> > > > > > > > > > > is that we're using C for everything, and simple programs for which
> > > > > > > > > > > loading the ELF is majority of the code would be better of being
> > > > > > > > > > > written in a dynamic language like python? Would it perhaps be a
> > > > > > > > > > > better idea to work on some high-level language bindings than spend
> > > > > > > > > > > time writing code gens and working around limitations of C?
> > > > > > > > > >
> > > > > > > > > > None of this work prevents Python bindings and other improvements, is
> > > > > > > > > > it? Patches, as always, are greatly appreciated ;)
> > > > > > > > >
> > > > > > > > > This "do it yourself" shit is not really funny :/
> > > > > > > > >
> > > > > > > > > I'll stop providing feedback on BPF patches if you guy keep saying
> > > > > > > > > that :/ Maybe that's what you want.
> > > > > > > > >
> > > > > > > > > > This skeleton stuff is not just to save code, but in general to
> > > > > > > > > > simplify and streamline working with BPF program from userspace side.
> > > > > > > > > > Fortunately or not, but there are a lot of real-world applications
> > > > > > > > > > written in C and C++ that could benefit from this, so this is still
> > > > > > > > > > immensely useful. selftests/bpf themselves benefit a lot from this
> > > > > > > > > > work, see few of the last patches in this series.
> > > > > > > > >
> > > > > > > > > Maybe those applications are written in C and C++ _because_ there
> > > > > > > > > are no bindings for high level languages. I just wish BPF programming
> > > > > > > > > was less weird and adding some funky codegen is not getting us closer
> > > > > > > > > to that goal.
> > > > > > > > >
> > > > > > > > > In my experience code gen is nothing more than a hack to work around
> > > > > > > > > bad APIs, but experiences differ so that's not a solid argument.
> > > > > > > > *nod*
> > > > > > > >
> > > > > > > > We have a nice set of C++ wrappers around libbpf internally, so we can do
> > > > > > > > something like BpfMap<key type, value type> and get a much better interface
> > > > > > > > with type checking. Maybe we should focus on higher level languages instead?
> > > > > > > > We are open to open-sourcing our C++ bits if you want to collaborate.
> > > > > > >
> > > > > > > Python/C++ bindings and API wrappers are an orthogonal concerns here.
> > > > > > > I personally think it would be great to have both Python and C++
> > > > > > > specific API that uses libbpf under the cover. The only debatable
> > > > > > > thing is the logistics: where the source code lives, how it's kept in
> > > > > > > sync with libbpf, how we avoid crippling libbpf itself because
> > > > > > > something is hard or inconvenient to adapt w/ Python, etc.
> > > > > >
> > > > > > [..]
> > > > > > > The problem I'm trying to solve here is not really C-specific. I don't
> > > > > > > think you can solve it without code generation for C++. How do you
> > > > > > > "generate" BPF program-specific layout of .data, .bss, .rodata, etc
> > > > > > > data sections in such a way, where it's type safe (to the degree that
> > > > > > > language allows that, of course) and is not "stringly-based" API? This
> > > > > > > skeleton stuff provides a natural, convenient and type-safe way to
> > > > > > > work with global data from userspace pretty much at the same level of
> > > > > > > performance and convenience, as from BPF side. How can you achieve
> > > > > > > that w/ C++ without code generation? As for Python, sure you can do
> > > > > > > dynamic lookups based on just the name of property/method, but amount
> > > > > > > of overheads is not acceptable for all applications (and Python itself
> > > > > > > is not acceptable for those applications). In addition to that, C is
> > > > > > > the best way for other less popular languages (e.g., Rust) to leverage
> > > > > > > libbpf without investing lots of effort in re-implementing libbpf in
> > > > > > > Rust.
> > > > > > I'd say that a libbpf API similar to dlopen/dlsym is a more
> > > > > > straightforward thing to do. Have a way to "open" a section and
> > > > > > a way to find a symbol in it. Yes, it's a string-based API,
> > > > > > but there is nothing wrong with it. IMO, this is easier to
> > > > > > use/understand and I suppose Python/C++ wrappers are trivial.
> > > > >
> > > > > Without digging through libbpf source code (or actually, look at code,
> > > > > but don't run any test program), what's the name of the map
> > > > > corresponding to .bss section, if object file is
> > > > > some_bpf_object_file.o? If you got it right (congrats, btw, it took me
> > > > > multiple attempts to memorize the pattern), how much time did you
> > > > > spend looking it up? Now compare it to `skel->maps.bss`. Further, if
> > > > > you use anonymous structs for your global vars, good luck maintaining
> > > > > two copies of that: one for BPF side and one for userspace.
> > > > As your average author of BPF programs I don't really care
> > > > which section my symbol ends up into. Just give me an api
> > > > to mmap all "global" sections (or a call per section which does all the
> > > > naming magic inside) and lookup symbol by name; I can cast it to a proper
> > > > type and set it.
> > >
> > > I'd like to not have to know about bss/rodata/data as well, but that's
> > > how things are done for global variables. In skeleton we can try to
> > > make an illusion like they are part of one big datasection/struct, but
> > > that seems like a bit too much magic at this point. But then again,
> > > one of the reasons I want this as an experimental feature, so that we
> > > can actually judge from real experience how inconvenient some things
> > > are, and not just based on "I think it would be ...".
> > >
> > > re: "Just give me ...". Following the spirit of "C is hard" from your
> > > previous arguments, you already have that API: mmap() syscall. C
> > > programmers have to be able to figure out the rest ;) But on the
> > > serious note, this auto-generated code in skeleton actually addresses
> > > all concerns (and more) that you mentioned: mmaping, knowing offsets,
> > > knowing names and types, etc. And it doesn't preclude adding more
> > > "conventional" additional APIs to do everything more dynamically,
> > > based on string names.
> > We have different understanding of what's difficult :-)
>
> Well, clearly... See below.
>
> >
> > To me, doing transparent data/rodata/bss mmap in bpf_object__load and then
> > adding a single libbpf api call to lookup symbol by string name is simple
> > (both from user perspective and from libbpf code complexity). Because in
> > order to use the codegen I need to teach our build system to spit it
> > out (which means I need to add bpftool to it and keep it
> > updated/etc/etc). You can use it as an example of "real experience how
> > inconvenient some things are".
>
> Yes, you need to integrate bpftool in your build process. Which is
> exactly what I'm doing internally for Facebook as well. But it's a
> mostly one-time cost, which benefits lots of users who have much
> better time with these changes, as opposed to make things simpler for
> us, libbpf developers, at the expense of more convoluted user
> experience for end users. I certainly prefer more complicated
> libbpf/bpftool code, if the resulting user experience is simpler for
> BPF application developers, no doubt about it.
I'm in the process of going through this with pahole to get proper BTF.
I don't think I'm willing yet (without a good reason) to go through
this process again :-D (I saw that you've converted a bunch of tests
to it which means I might not be able to run them).

I just hope bpftool codegen doesn't become a requirement for
any new useful feature; same happened to BTF, which was optional
for a while and now I can't run a single selftest without it.
I can totally understand the BTF requirement though, but I don't buy the
"codegen makes user experience simple for bpf application developers",
sorry (I guess, at this point, it's all about preference).

> > > > RE anonymous structs: maybe don't use them if you want to share the data
> > > > between bpf and userspace?
> > >
> > > Alright.
> > >
> > > >
> > > > > I never said there is anything wrong with current straightforward
> > > > > libbpf API, but I also never said it's the easiest and most
> > > > > user-friendly way to work with BPF either. So we'll have both
> > > > > code-generated interface and existing API. Furthermore, they are
> > > > > interoperable (you can pass skel->maps.whatever to any of the existing
> > > > > libbpf APIs, same for progs, links, obj itself). But there isn't much
> > > > > that can beat performance and usability of code-generated .data, .bss,
> > > > > .rodata (and now .extern) layout.
> > > > I haven't looked closely enough, but is there a libbpf api to get
> > > > an offset of a variable? Suppose I have the following in bpf.c:
> > > >
> > > > int a;
> > > > int b;
> > > >
> > > > Can I get an offset of 'b' in the .bss without manually parsing BTF?
> > >
> > > No there isn't right now. There isn't even an API to know that there
> > > is such a variable called "b". Except for this skeleton, of course.
> > >
> > > >
> > > > TBH, I don't buy the performance argument for these global maps.
> > > > When you did the mmap patchset for the array, you said it yourself
> > > > that it's about convenience and not performance.
> > >
> > > Yes, it's first and foremost about convenience, addressing exactly the
> > > problems you mentioned above. But performance is critical for some use
> > > cases, and nothing can beat memory-mapped view of BPF map for those.
> > > Think about the case of frequently polling (or even atomically
> > > exchanging) some stats from userspace, as one possible example. E.g.,
> > > like some map statistics (number of filled elements, p50 of whatever
> > > of those elements, etc). I'm not sure what's there to buy: doing
> > > syscall to get **entire** global data map contents vs just fetching
> > > single integer from memory-mapped region, guess which one is cheaper?
> > My understanding was that when you were talking about performance, you
> > were talking about doing symbol offset lookup at runtime vs having a
> > generated struct with fixed offsets; not about mmap vs old api with copy
> > (this debate is settled since your patches are accepted).
>
> Oh, I see. No, I didn't intend to claim that performance of looking up
> variable by name in BTF is a big performance concern. Settled then :)
>
> >
> > But to your original reply: you do understand that if you have multiple
> > threads that write to this global data you have a bigger problem, right?
>
> Not necessarily. BPF has atomic increment instruction, doesn't it? And
> can't we still do atomic swap from user-space (it's just a memory,
> after all), right? I haven't tried, tbh, but don't see why it wouldn't
> work.
Atomics are even worse because you get all these nice cache bouncing effects.
That's why I didn't understand initialy the argument about performance.