Re: [PATCH v2 1/1] arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180

[rkambl]

On 2019-12-12 01:03, Doug Anderson wrote:
> Hi,
>
> On Thu, Nov 28, 2019 at 1:55 AM Rajeshwari <rkambl@xxxxxxxxxxxxxx> 
> wrote:
> > Add TSENS node and user thermal zone for TSENS sensors in SC7180.
> >
> > Signed-off-by: Rajeshwari <rkambl@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi | 527 
> > +++++++++++++++++++++++++++++++++++
> >  1 file changed, 527 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
> > b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 666e9b9..6656ffc 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -911,6 +911,26 @@
> >                         status = "disabled";
> >                 };
> >
> > +               tsens0: thermal-sensor@c263000 {
> > +                       compatible = 
> > "qcom,sc7180-tsens","qcom,tsens-v2";
> > +                       reg = <0 0x0c263000 0 0x1ff>, /* TM */
> > +                               <0 0x0c222000 0 0x1ff>; /* SROT */
> > +                       #qcom,sensors = <15>;
> > +                       interrupts = <GIC_SPI 506 
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                       interrupt-names = "uplow";
>
> Can you also send a patch to match Amit's ("arm64: dts: sdm845:
> thermal: Add critical interrupt support") [1].  If I'm reading things
> correctly it should be 508 for tsens0 and 509 for tsens1 just like on
> sdm845.
>
> [1]
> https://lore.kernel.org/r/c536e9cdb448bbad3441f6580fa57f1f921fb580.1573499020.git.amit.kucheria@xxxxxxxxxx

yes, i will send the patch for critical interrupt support.
> Thanks!
>
> -Rajeshwari