Re: [PATCH] ARM: dts: imx6qdl: Enable egalax touch screen
From: Marco Felsch
Date: Thu Dec 12 2019 - 11:23:07 EST
On 19-12-12 17:07, Marco Felsch wrote:
> Hi Sjoerd,
>
> On 19-12-12 17:02, Sjoerd Simons wrote:
> > Sabrelite boards can have an lvds screen attached with a built-in i2c touch
> > screen. Enable this in the dtsi.
>
> Can this be any screen available on the market?
At least you should adapt the title to: "ARM: dts: imx6qdl-sabrelite: ..."
Regards,
Marco
>
> > Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
> > ---
> >
> > arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 8 ++++++++
> > 1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> > index 8468216dae9b..382b127b2251 100644
> > --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> > +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> > @@ -416,6 +416,14 @@ &i2c3 {
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_i2c3>;
> > status = "okay";
> > +
> > + touchscreen@4 {
> > + compatible = "eeti,egalax_ts";
> > + reg = <0x04>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> > + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
>
> The wakeup-gpio and the irq-line are sharing the same gpio line?
>
> Regards,
> Marco
>
> > + };
> > };
> >
> > &iomuxc {
> > --
> > 2.24.0
> >
> >
> >
>
> --
> Pengutronix e.K. | |
> Steuerwalder Str. 21 | http://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |