[PATCH v4 02/12] ACPI: thermal: switch to use <linux/units.h> helpers
From: Akinobu Mita
Date: Sun Dec 15 2019 - 00:16:59 EST
This switches the ACPI thermal zone driver to use celsius_to_deci_kelvin(),
deci_kelvin_to_celsius(), and deci_kelvin_to_millicelsius_with_offset() in
<linux/units.h> instead of helpers in <linux/thermal.h>.
This is preparation for centralizing the kelvin to/from Celsius conversion
helpers in <linux/units.h>.
Cc: Sujith Thomas <sujith.thomas@xxxxxxxxx>
Cc: Darren Hart <dvhart@xxxxxxxxxxxxx>
Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx>
Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
Cc: Jean Delvare <jdelvare@xxxxxxxx>
Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: Keith Busch <kbusch@xxxxxxxxxx>
Cc: Jens Axboe <axboe@xxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Sagi Grimberg <sagi@xxxxxxxxxxx>
Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx>
---
* v4
- change include order
- keep the line over 80 characters because this change doesn't make it longer
drivers/acpi/thermal.c | 34 ++++++++++++++++++----------------
1 file changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index d831a61..19067a5 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -27,6 +27,7 @@
#include <linux/acpi.h>
#include <linux/workqueue.h>
#include <linux/uaccess.h>
+#include <linux/units.h>
#define PREFIX "ACPI: "
@@ -172,7 +173,7 @@ struct acpi_thermal {
struct acpi_handle_list devices;
struct thermal_zone_device *thermal_zone;
int tz_enabled;
- int kelvin_offset;
+ int kelvin_offset; /* in millidegrees */
struct work_struct thermal_check_work;
};
@@ -297,7 +298,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
if (crt == -1) {
tz->trips.critical.flags.valid = 0;
} else if (crt > 0) {
- unsigned long crt_k = CELSIUS_TO_DECI_KELVIN(crt);
+ unsigned long crt_k = celsius_to_deci_kelvin(crt);
+
/*
* Allow override critical threshold
*/
@@ -333,7 +335,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
if (psv == -1) {
status = AE_SUPPORT;
} else if (psv > 0) {
- tmp = CELSIUS_TO_DECI_KELVIN(psv);
+ tmp = celsius_to_deci_kelvin(psv);
status = AE_OK;
} else {
status = acpi_evaluate_integer(tz->device->handle,
@@ -413,7 +415,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
break;
if (i == 1)
tz->trips.active[0].temperature =
- CELSIUS_TO_DECI_KELVIN(act);
+ celsius_to_deci_kelvin(act);
else
/*
* Don't allow override higher than
@@ -421,9 +423,9 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
*/
tz->trips.active[i - 1].temperature =
(tz->trips.active[i - 2].temperature <
- CELSIUS_TO_DECI_KELVIN(act) ?
+ celsius_to_deci_kelvin(act) ?
tz->trips.active[i - 2].temperature :
- CELSIUS_TO_DECI_KELVIN(act));
+ celsius_to_deci_kelvin(act));
break;
} else {
tz->trips.active[i].temperature = tmp;
@@ -519,7 +521,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, int *temp)
if (result)
return result;
- *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(tz->temperature,
+ *temp = deci_kelvin_to_millicelsius_with_offset(tz->temperature,
tz->kelvin_offset);
return 0;
}
@@ -624,7 +626,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
if (tz->trips.critical.flags.valid) {
if (!trip) {
- *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ *temp = deci_kelvin_to_millicelsius_with_offset(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
@@ -634,7 +636,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
if (tz->trips.hot.flags.valid) {
if (!trip) {
- *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ *temp = deci_kelvin_to_millicelsius_with_offset(
tz->trips.hot.temperature,
tz->kelvin_offset);
return 0;
@@ -644,7 +646,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
if (tz->trips.passive.flags.valid) {
if (!trip) {
- *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ *temp = deci_kelvin_to_millicelsius_with_offset(
tz->trips.passive.temperature,
tz->kelvin_offset);
return 0;
@@ -655,7 +657,7 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal,
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
- *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ *temp = deci_kelvin_to_millicelsius_with_offset(
tz->trips.active[i].temperature,
tz->kelvin_offset);
return 0;
@@ -672,7 +674,7 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal,
struct acpi_thermal *tz = thermal->devdata;
if (tz->trips.critical.flags.valid) {
- *temperature = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ *temperature = deci_kelvin_to_millicelsius_with_offset(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
@@ -692,7 +694,7 @@ static int thermal_get_trend(struct thermal_zone_device *thermal,
if (type == THERMAL_TRIP_ACTIVE) {
int trip_temp;
- int temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ int temp = deci_kelvin_to_millicelsius_with_offset(
tz->temperature, tz->kelvin_offset);
if (thermal_get_trip_temp(thermal, trip, &trip_temp))
return -EINVAL;
@@ -1043,9 +1045,9 @@ static void acpi_thermal_guess_offset(struct acpi_thermal *tz)
{
if (tz->trips.critical.flags.valid &&
(tz->trips.critical.temperature % 5) == 1)
- tz->kelvin_offset = 2731;
+ tz->kelvin_offset = 273100;
else
- tz->kelvin_offset = 2732;
+ tz->kelvin_offset = 273200;
}
static void acpi_thermal_check_fn(struct work_struct *work)
@@ -1087,7 +1089,7 @@ static int acpi_thermal_add(struct acpi_device *device)
INIT_WORK(&tz->thermal_check_work, acpi_thermal_check_fn);
pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device),
- acpi_device_bid(device), DECI_KELVIN_TO_CELSIUS(tz->temperature));
+ acpi_device_bid(device), deci_kelvin_to_celsius(tz->temperature));
goto end;
free_memory:
--
2.7.4