Re: [PATCH 2/2] PCI: amlogic: Use PCIe pll gate when available

[Remi Pommarel]

On Mon, Dec 09, 2019 at 11:03:15AM +0000, Andrew Murray wrote:
> On Sun, Dec 08, 2019 at 10:03:20PM +0100, Remi Pommarel wrote:
> > In order to get PCIe working reliably on some AXG platforms, PCIe pll
> > cml needs to be enabled. This is done by using the PCIE_PLL_CML_ENABLE
> > clock gate.
> 
> s/cml/CML/
> 
> In addition to Jerome's feedback - it would also be helpful to explain
> when CML outputs should be enabled, i.e. which platforms and why those
> ones?
> 
> > 
> > This clock gate is optional, so do not fail if it is missing in the
> > devicetree.
> 
> If certain platforms require PCIE_PLL_CML_ENABLE to work reliably and
> thus the clock is specified in the device tree - then surely if there
> is an error in enabling the clock we should fail? I.e. should you only
> ignore -ENOENT here?

Good point. Will do.

Thanks

-- 
Remi

> 
> Thanks,
> 
> Andrew Murray
> 
> > 
> > Signed-off-by: Remi Pommarel <repk@xxxxxxxxxxxx>
> > ---
> >  drivers/pci/controller/dwc/pci-meson.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> > index 3772b02a5c55..32b70ea9a426 100644
> > --- a/drivers/pci/controller/dwc/pci-meson.c
> > +++ b/drivers/pci/controller/dwc/pci-meson.c
> > @@ -89,6 +89,7 @@ struct meson_pcie_clk_res {
> >  	struct clk *mipi_gate;
> >  	struct clk *port_clk;
> >  	struct clk *general_clk;
> > +	struct clk *pll_cml_gate;
> >  };
> >  
> >  struct meson_pcie_rc_reset {
> > @@ -300,6 +301,10 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
> >  	if (IS_ERR(res->clk))
> >  		return PTR_ERR(res->clk);
> >  
> > +	res->pll_cml_gate = meson_pcie_probe_clock(dev, "pll_cml_en", 0);
> > +	if (IS_ERR(res->pll_cml_gate))
> > +		res->pll_cml_gate = NULL;
> > +
> >  	return 0;
> >  }
> >  
> > -- 
> > 2.24.0
> >