Re: [PATCH 2/5] media: i2c: imx290: Add support for test pattern generation

[Manivannan Sadhasivam]

Hi Sakari,

On Tue, Dec 03, 2019 at 10:48:50AM +0200, Sakari Ailus wrote:
> Hi Manivannan,
> 
> On Sat, Nov 30, 2019 at 12:35:38AM +0530, Manivannan Sadhasivam wrote:
> > Add support for generating following test patterns by IMX290:
> > 
> > * Sequence Pattern 1
> > * Horizontal Color-bar Chart
> > * Vertical Color-bar Chart
> > * Sequence Pattern 2
> > * Gradation Pattern 1
> > * Gradation Pattern 2
> > * 000/555h Toggle Pattern
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> > ---
> >  drivers/media/i2c/imx290.c | 41 +++++++++++++++++++++++++++++++++++++-
> >  1 file changed, 40 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > index 1d49910937fb..e218c959a729 100644
> > --- a/drivers/media/i2c/imx290.c
> > +++ b/drivers/media/i2c/imx290.c
> > @@ -26,12 +26,19 @@
> >  #define IMX290_REGHOLD 0x3001
> >  #define IMX290_XMSTA 0x3002
> >  #define IMX290_FR_FDG_SEL 0x3009
> > +#define IMX290_BLKLEVEL_LOW 0x300a
> > +#define IMX290_BLKLEVEL_HIGH 0x300b
> >  #define IMX290_GAIN 0x3014
> >  #define IMX290_HMAX_LOW 0x301c
> >  #define IMX290_HMAX_HIGH 0x301d
> > +#define IMX290_PGCTRL 0x308c
> >  #define IMX290_PHY_LANE_NUM 0x3407
> >  #define IMX290_CSI_LANE_MODE 0x3443
> >  
> > +#define IMX290_PGCTRL_REGEN BIT(0)
> > +#define IMX290_PGCTRL_THRU BIT(1)
> > +#define IMX290_PGCTRL_MODE(n) ((n) << 4)
> > +
> >  /* HMAX fields */
> >  #define IMX290_HMAX_2_1920 0x1130
> >  #define IMX290_HMAX_4_1920 0x0898
> > @@ -99,6 +106,17 @@ static const struct regmap_config imx290_regmap_config = {
> >  	.cache_type = REGCACHE_RBTREE,
> >  };
> >  
> > +static const char * const imx290_test_pattern_menu[] = {
> > +	"Disabled",
> > +	"Sequence Pattern 1",
> > +	"Horizontal Color-bar Chart",
> > +	"Vertical Color-bar Chart",
> > +	"Sequence Pattern 2",
> > +	"Gradation Pattern 1",
> > +	"Gradation Pattern 2",
> > +	"000/555h Toggle Pattern",
> > +};
> > +
> >  static const struct imx290_regval imx290_global_init_settings[] = {
> >  	{ 0x3007, 0x00 },
> >  	{ 0x3018, 0x65 },
> > @@ -394,6 +412,22 @@ static int imx290_set_ctrl(struct v4l2_ctrl *ctrl)
> >  	case V4L2_CID_GAIN:
> >  		ret = imx290_set_gain(imx290, ctrl->val);
> >  		break;
> > +	case V4L2_CID_TEST_PATTERN:
> > +		if (ctrl->val) {
> > +			imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x00);
> > +			imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
> > +			mdelay(10);
> 
> Any particular reason for a busy loop instead of sleeping? Same below.
> 

Nothing. I should've used msleep() here... Will change it.

Thanks,
Mani

> > +			imx290_write_reg(imx290, IMX290_PGCTRL,
> > +					 (u8)(IMX290_PGCTRL_REGEN |
> > +					 IMX290_PGCTRL_THRU |
> > +					 IMX290_PGCTRL_MODE(ctrl->val)));
> > +		} else {
> > +			imx290_write_reg(imx290, IMX290_PGCTRL, 0x00);
> > +			mdelay(10);
> > +			imx290_write_reg(imx290, IMX290_BLKLEVEL_LOW, 0x3c);
> > +			imx290_write_reg(imx290, IMX290_BLKLEVEL_HIGH, 0x00);
> > +		}
> > +		break;
> >  	default:
> >  		ret = -EINVAL;
> >  		break;
> > @@ -878,7 +912,7 @@ static int imx290_probe(struct i2c_client *client)
> >  
> >  	mutex_init(&imx290->lock);
> >  
> > -	v4l2_ctrl_handler_init(&imx290->ctrls, 3);
> > +	v4l2_ctrl_handler_init(&imx290->ctrls, 4);
> >  
> >  	v4l2_ctrl_new_std(&imx290->ctrls, &imx290_ctrl_ops,
> >  			  V4L2_CID_GAIN, 0, 72, 1, 0);
> > @@ -896,6 +930,11 @@ static int imx290_probe(struct i2c_client *client)
> >  					       INT_MAX, 1,
> >  					       imx290_modes[0].pixel_rate);
> >  
> > +	v4l2_ctrl_new_std_menu_items(&imx290->ctrls, &imx290_ctrl_ops,
> > +				     V4L2_CID_TEST_PATTERN,
> > +				     ARRAY_SIZE(imx290_test_pattern_menu) - 1,
> > +				     0, 0, imx290_test_pattern_menu);
> > +
> >  	imx290->sd.ctrl_handler = &imx290->ctrls;
> >  
> >  	if (imx290->ctrls.error) {
> 
> -- 
> Sakari Ailus