Re: [PATCH 02/18] dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding

[Nagarjuna Kristam]

> 
> 
> On Fri, Dec 06, 2019 at 04:20:05PM +0530, Nagarjuna Kristam wrote:
>> Add device-tree binding documentation for the XUSB device mode controller
>> present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0
>> specification.
>>
>> Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
>> ---
> Next time version your patches correctly and include version history
> here so I don't have to go look up why my R-by is missing.
> 
Since this was a new series, i didnot add version history. But considering that this
was reviewed in different series, i will take a note to include the reviewed link
for quick reference.
>>  .../devicetree/bindings/usb/nvidia,tegra-xudc.yaml | 204 +++++++++++++++++++++
>>  1 file changed, 204 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
>> new file mode 100644
>> index 0000000..b23c451
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra-xudc.yaml
>> @@ -0,0 +1,204 @@
>> +# SPDX-License-Identifier: GPL-2.0
> Dual license new bindings please:
> 
> (GPL-2.0-only OR BSD-2-Clause)
> 
Will update accordingly.
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/usb/nvidia,tegra-xudc.yaml#";
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
>> +
>> +title: Device tree binding for NVIDIA Tegra XUSB device mode controller (XUDC)
>> +
>> +description:
>> +  The Tegra XUDC controller supports both USB 2.0 HighSpeed/FullSpeed and
>> +  USB 3.0 SuperSpeed protocols.
>> +
>> +maintainers:
>> +  - Nagarjuna Kristam <nkristam@xxxxxxxxxx>
>> +  - JC Kuo <jckuo@xxxxxxxxxx>
>> +  - Thierry Reding <treding@xxxxxxxxxx>
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +        - const: nvidia,tegra210-xudc # For Tegra210
>> +      - items:
>> +        - const: nvidia,tegra186-xudc # For Tegra186
> Use 'enum' instead of oneOf+const.
> 
Will update
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +    description: Must contain the XUSB device interrupt.
> Don't need a description for a single interrupt line.
> 
Will remove
>> +
>> +  power-domains:
>> +    maxItems: 2
>> +    description:
>> +      A list of PM domain specifiers that reference each power-domain
>> +      used by the XUSB device mode controller. This list must comprise of a
>> +      specifier for the XUSBA and XUSBB power-domains.
>> +      See ../power/power_domain.txt and ../arm/tegra/nvidia,tegra20-pmc.txt
>> +      for details.
> Just need:
> 
> items:
>   - description: XUSBA power-domain
>   - description: XUSBB power-domain
> 
Will update including below coments to update as below
   - description: XUSBA(superSpeed) power-domain
   - description: XUSBB(device) power-domain
>> +
>> +  power-domains-names:
>> +    maxItems: 2
>> +    description:
>> +       A list of names that represent each of the specifiers in
>> +       the 'power-domains' property.
> That's every 'power-domains-names'.
> 
>> +    items:
>> +      - const: ss
>> +      - const: dev
> Okay, but those names don't match up with XUSBA and XUSBB. Names should
> be meaningful or local to the module, not the provider if that helps.
> 
>> +
>> +  nvidia,xusb-padctl:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    description:
>> +      phandle to the XUSB pad controller that is used to configure the USB pads
>> +      used by the XUDC controller.
>> +
>> +  phys:
>> +    minItems: 1
>> +    description:
>> +      Must contain an entry for each entry in phy-names.
>> +      See ../phy/phy-bindings.txt for details.
>> +
>> +  phy-names:
>> +    minItems: 1
>> +    items:
>> +      - const: usb2-0
>> +      - const: usb2-1
>> +      - const: usb2-2
>> +      - const: usb2-3
>> +      - const: usb3-0
>> +      - const: usb3-1
>> +      - const: usb3-2
>> +      - const: usb3-3
>> +
>> +  avddio-usb-supply:
>> +    description: PCIe/USB3 analog logic power supply. Must supply 1.05 V.
>> +
>> +  hvdd-usb-supply:
>> +    description: USB controller power supply. Must supply 3.3 V.
>> +
>> +required:
>> +  - compatible
>> +  - power-domains
>> +  - power-domain-names
>> +  - nvidia,xusb-padctl
>> +  - phys
>> +  - phy-names
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          items:
>> +            const: nvidia,tegra210-xudc
>> +
>> +    then:
>> +      properties:
>> +        reg:
>> +          maxItems: 3
>> +          items:
>> +          - description: XUSB device controller registers
>> +          - description: XUSB device PCI Config registers
>> +          - description: XUSB device registers.
>> +        reg-names:
>> +          maxItems: 3
>> +          items:
>> +            - const: base
>> +            - const: fpci
>> +            - const: ipfs
> As these are a superset of tegra186, you can move this up and tegra186
> just needs to define 'maxItems: 2'.
> 
Will move Main definitions up and update these sections with minItems and maxItems
accordingly.
>> +        clocks:
>> +          description:
>> +            Must contain an entry for all clocks used. See ../clock/clock-bindings.txt
>> +            for details.
>> +          maxItems: 5
>> +          items:
>> +            - description: Clock to enable core XUSB dev clock.
>> +            - description: Clock to enable XUSB super speed clock.
>> +            - description: Clock to enable XUSB super speed dev clock.
>> +            - description: Clock to enable XUSB high speed dev clock.
>> +            - description: Clock to enable XUSB full speed dev clock.
>> +        clock-names:
>> +          items:
>> +           - const: dev
>> +           - const: ss
>> +           - const: ss_src
>> +           - const: hs_src
>> +           - const: fs_src
> I would re-order the last 2 entries so that you can do the same thing as
> I said for 'reg'.
> 
>> +      required:
>> +        - reg
>> +        - reg-names
>> +        - clocks
>> +        - clock-names
> No need for these to be under the if. They are always required and
> don't have to be where defined by 'properties'.
> 
Will move to main "required" section.
>> +        - avddio-usb-supply
>> +        - hvdd-usb-supply
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: nvidia,tegra186-xudc
>> +
>> +    then:
>> +      properties:
>> +        reg:
>> +          maxItems: 2
>> +          items:
>> +          - description: XUSB device controller registers
>> +          - description: XUSB device PCI Config registers
>> +        reg-names:
>> +          maxItems: 2
>> +          items:
>> +            - const: base
>> +            - const: fpci
>> +        clocks:
>> +          description:
>> +            Must contain an entry for all clocks used. See ../clock/clock-bindings.txt
>> +            for details.
>> +          maxItems: 4
>> +          items:
>> +            - description: Clock to enable core XUSB dev clock.
>> +            - description: Clock to enable XUSB super speed clock.
>> +            - description: Clock to enable XUSB super speed dev clock.
>> +            - description: Clock to enable XUSB full speed dev clock.
>> +        clock-names:
>> +          items:
>> +           - const: dev
>> +           - const: ss
>> +           - const: ss_src
>> +           - const: fs_src
>> +      required:
>> +        - reg
>> +        - reg-names
>> +        - clocks
>> +        - clock-names
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/tegra210-car.h>
>> +    #include <dt-bindings/gpio/tegra-gpio.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +    usb@700d0000 {
>> +        compatible = "nvidia,tegra210-xudc";
>> +        reg = <0x0 0x700d0000 0x0 0x8000>,
>> +              <0x0 0x700d8000 0x0 0x1000>,
>> +              <0x0 0x700d9000 0x0 0x1000>;
>> +        reg-names = "base", "fpci", "ipfs";
>> +
>> +        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
>> +
>> +        clocks = <&tegra_car TEGRA210_CLK_XUSB_DEV>,
>> +                 <&tegra_car TEGRA210_CLK_XUSB_SS>,
>> +                 <&tegra_car TEGRA210_CLK_XUSB_SSP_SRC>,
>> +                 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
>> +                 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>;
>> +        clock-names = "dev", "ss", "ss_src", "hs_src", "fs_src";
>> +
>> +        power-domains = <&pd_xusbdev>, <&pd_xusbss>;
>> +        power-domain-names = "dev", "ss";
>> +
>> +        nvidia,xusb-padctl = <&padctl>;
>> +
>> +        phys = <&micro_b>;
>> +        phy-names = "usb2-0";
>> +
>> +        avddio-usb-supply = <&vdd_pex_1v05>;
>> +        hvdd-usb-supply = <&vdd_3v3_sys>;
>> +    };
>> --
>> 2.7.4
>>