Re: [PATCH v4 0/2] add Microchip PIT64B timer

[Daniel Lezcano]

On 13/12/2019 12:19, Claudiu Beznea wrote:
> Hi,
> 
> This series adds driver for Microchip PIT64B timer.
> Timer could be used in continuous or oneshot mode. It has 2x32 bit registers
> to emulate a 64 bit timer. The timer's period could be configured via LSB_PR
> and MSB_PR registers. The current timer's value could be checked via TLSB and
> TMSB registers. When (TMSB << 32) | TLSB value reach the (MSB_PR << 32) | LSB_PR
> interrupt is raised. If in contiuous mode the TLSB and TMSB resets and restart
> counting.
> 
> This drivers uses PIT64B capabilities for clocksource and clockevent.
> The first requested PIT64B timer is used for clockevent. The second one is used
> for clocksource. Individual PIT64B hardware resources were used for clocksource
> and clockevent to be able to support high resolution timers with this PIT64B
> implementation.

I've applied the patches.

Thanks

 -- Daniel

-- 
 <http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog