[PATCH 17/55] staging: wfx: use meaningful names for CFG_BYTE_ORDER_*

From: JÃrÃme Pouiller
Date: Mon Dec 16 2019 - 12:05:05 EST


From: JÃrÃme Pouiller <jerome.pouiller@xxxxxxxxxx>

This new naming allows to save a comment.

Signed-off-by: JÃrÃme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
drivers/staging/wfx/bus_spi.c | 2 ++
drivers/staging/wfx/fwio.c | 2 +-
drivers/staging/wfx/hwio.h | 15 +++++----------
3 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/wfx/bus_spi.c b/drivers/staging/wfx/bus_spi.c
index 0a055c4041af..40bc33035de2 100644
--- a/drivers/staging/wfx/bus_spi.c
+++ b/drivers/staging/wfx/bus_spi.c
@@ -107,6 +107,8 @@ static int wfx_spi_copy_to_io(void *priv, unsigned int addr,

cpu_to_le16s(&regaddr);

+ // Register address and CONFIG content always use 16bit big endian
+ // ("BADC" order)
if (bus->need_swab)
swab16s(&regaddr);
if (bus->need_swab && addr == WFX_REG_CONFIG)
diff --git a/drivers/staging/wfx/fwio.c b/drivers/staging/wfx/fwio.c
index 47e627bf0f8e..9d61082c1e6c 100644
--- a/drivers/staging/wfx/fwio.c
+++ b/drivers/staging/wfx/fwio.c
@@ -339,7 +339,7 @@ int wfx_init_device(struct wfx_dev *wdev)
ktime_t now, start;
u32 reg;

- reg = CFG_DIRECT_ACCESS_MODE | CFG_CPU_RESET | CFG_WORD_MODE2;
+ reg = CFG_DIRECT_ACCESS_MODE | CFG_CPU_RESET | CFG_BYTE_ORDER_ABCD;
if (wdev->pdata.use_rising_clk)
reg |= CFG_CLK_RISE_EDGE;
ret = config_reg_write(wdev, reg);
diff --git a/drivers/staging/wfx/hwio.h b/drivers/staging/wfx/hwio.h
index b2c1a66de963..4b6ef061b40b 100644
--- a/drivers/staging/wfx/hwio.h
+++ b/drivers/staging/wfx/hwio.h
@@ -37,16 +37,11 @@ int ahb_reg_write(struct wfx_dev *wdev, u32 addr, u32 val);
#define CFG_ERR_HOST_NO_IN_QUEUE 0x00000040
#define CFG_ERR_HOST_CRC_MISS 0x00000080 // only with SDIO
#define CFG_SPI_IGNORE_CS 0x00000080 // only with SPI
-/* Bytes ordering (only writable in SPI): */
-#define CFG_WORD_MODE_MASK 0x00000300
-/*
- * B1,B0,B3,B2 (In SPI, register address and
- * CONFIG data always use this mode)
- */
-#define CFG_WORD_MODE0 0x00000000
-#define CFG_WORD_MODE1 0x00000100 // B3,B2,B1,B0
-#define CFG_WORD_MODE2 0x00000200 // B0,B1,B2,B3 (SDIO)
-#define CFG_DIRECT_ACCESS_MODE 0x00000400 // Direct or queue access mode
+#define CFG_BYTE_ORDER_MASK 0x00000300 // only writable with SPI
+#define CFG_BYTE_ORDER_BADC 0x00000000
+#define CFG_BYTE_ORDER_DCBA 0x00000100
+#define CFG_BYTE_ORDER_ABCD 0x00000200 // SDIO always use this value
+#define CFG_DIRECT_ACCESS_MODE 0x00000400
#define CFG_PREFETCH_AHB 0x00000800
#define CFG_DISABLE_CPU_CLK 0x00001000
#define CFG_PREFETCH_SRAM 0x00002000
--
2.20.1