Re: [PATCH 10/12] riscv: add nommu support
From: David Abdurachmanov
Date: Mon Dec 16 2019 - 17:04:13 EST
On Mon, Nov 18, 2019 at 1:13 AM Paul Walmsley <paul.walmsley@xxxxxxxxxx> wrote:
>
> On Mon, 28 Oct 2019, Christoph Hellwig wrote:
>
> > The kernel runs in M-mode without using page tables, and thus can't run
> > bare metal without help from additional firmware.
> >
> > Most of the patch is just stubbing out code not needed without page
> > tables, but there is an interesting detail in the signals implementation:
> >
> > - The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
> > entry point, but the ELF VDSO is not supported for nommu Linux.
> > We instead copy the code to call the syscall onto the stack.
> >
> > In addition to enabling the nommu code a new defconfig for a small
> > kernel image that can run in nommu mode on qemu is also provided, to run
> > a kernel in qemu you can use the following command line:
> >
> > qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
> > -kernel arch/riscv/boot/loader \
> > -drive file=rootfs.ext2,format=raw,id=hd0 \
> > -device virtio-blk-device,drive=hd0
> >
> > Contains contributions from Damien Le Moal <Damien.LeMoal@xxxxxxx>.
> >
> > Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> > Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>
>
> Thanks, queued the following for v5.5-rc1.
>
>
[..]
> diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> index d3221017194d..beb5f0865e39 100644
> --- a/arch/riscv/include/asm/pgtable.h
> +++ b/arch/riscv/include/asm/pgtable.h
> @@ -25,6 +25,7 @@
> #include <asm/pgtable-32.h>
> #endif /* CONFIG_64BIT */
>
> +#ifdef CONFIG_MMU
> /* Number of entries in the page global directory */
> #define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t))
> /* Number of entries in the page table */
> @@ -32,7 +33,6 @@
>
> /* Number of PGD entries that a user-mode program can use */
> #define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
> -#define FIRST_USER_ADDRESS 0
>
> /* Page protection bits */
> #define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER)
> @@ -84,42 +84,6 @@ extern pgd_t swapper_pg_dir[];
> #define __S110 PAGE_SHARED_EXEC
> #define __S111 PAGE_SHARED_EXEC
>
> -#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> -#define VMALLOC_END (PAGE_OFFSET - 1)
> -#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
> -#define PCI_IO_SIZE SZ_16M
> -
> -/*
> - * Roughly size the vmemmap space to be large enough to fit enough
> - * struct pages to map half the virtual address space. Then
> - * position vmemmap directly below the VMALLOC region.
> - */
> -#define VMEMMAP_SHIFT \
> - (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> -#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> -#define VMEMMAP_END (VMALLOC_START - 1)
> -#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> -
> -#define vmemmap ((struct page *)VMEMMAP_START)
> -
> -#define PCI_IO_END VMEMMAP_START
> -#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> -#define FIXADDR_TOP PCI_IO_START
> -
> -#ifdef CONFIG_64BIT
> -#define FIXADDR_SIZE PMD_SIZE
> -#else
> -#define FIXADDR_SIZE PGDIR_SIZE
> -#endif
> -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
> -
> -/*
> - * ZERO_PAGE is a global shared page that is always zero,
> - * used for zero-mapped memory areas, etc.
> - */
> -extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
> -#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
> -
> static inline int pmd_present(pmd_t pmd)
> {
> return (pmd_val(pmd) & (_PAGE_PRESENT | _PAGE_PROT_NONE));
> @@ -430,11 +394,34 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
> #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
> #define __swp_entry_to_pte(x) ((pte_t) { (x).val })
>
> -#define kern_addr_valid(addr) (1) /* FIXME */
> +#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
> +#define VMALLOC_END (PAGE_OFFSET - 1)
> +#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
>
> -extern void *dtb_early_va;
> -extern void setup_bootmem(void);
> -extern void paging_init(void);
> +/*
> + * Roughly size the vmemmap space to be large enough to fit enough
> + * struct pages to map half the virtual address space. Then
> + * position vmemmap directly below the VMALLOC region.
> + */
> +#define VMEMMAP_SHIFT \
> + (CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
> +#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
> +#define VMEMMAP_END (VMALLOC_START - 1)
> +#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
> +
> +#define vmemmap ((struct page *)VMEMMAP_START)
Why did you move these defines below the functions?
This seems to break kernel (5.5-rc2) compilation in Fedora/RISCV. The
function above needed vmemmap macro.
BUILDSTDERR: In file included from ./arch/riscv/include/asm/page.h:131,
BUILDSTDERR: from ./arch/riscv/include/asm/thread_info.h:11,
BUILDSTDERR: from ./include/linux/thread_info.h:38,
BUILDSTDERR: from ./include/asm-generic/preempt.h:5,
BUILDSTDERR: from
./arch/riscv/include/generated/asm/preempt.h:1,
BUILDSTDERR: from ./include/linux/preempt.h:78,
BUILDSTDERR: from ./include/linux/spinlock.h:51,
BUILDSTDERR: from ./include/linux/seqlock.h:36,
BUILDSTDERR: from ./include/linux/time.h:6,
BUILDSTDERR: from ./include/linux/stat.h:19,
BUILDSTDERR: from ./include/linux/module.h:13,
BUILDSTDERR: from init/main.c:17:
BUILDSTDERR: ./arch/riscv/include/asm/pgtable.h: In function 'pmd_page':
BUILDSTDERR: ./include/asm-generic/memory_model.h:54:29: error:
'vmemmap' undeclared (first use in this function); did you mean
'mem_map'?
BUILDSTDERR: 54 | #define __pfn_to_page(pfn) (vmemmap + (pfn))
BUILDSTDERR: | ^~~~~~~
BUILDSTDERR: ./include/asm-generic/memory_model.h:82:21: note: in
expansion of macro '__pfn_to_page'
BUILDSTDERR: 82 | #define pfn_to_page __pfn_to_page
BUILDSTDERR: | ^~~~~~~~~~~~~
BUILDSTDERR: ./arch/riscv/include/asm/pgtable.h:140:9: note: in
expansion of macro 'pfn_to_page'
BUILDSTDERR: 140 | return pfn_to_page(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
BUILDSTDERR: | ^~~~~~~~~~~
BUILDSTDERR: ./include/asm-generic/memory_model.h:54:29: note: each
undeclared identifier is reported only once for each function it
appears in
BUILDSTDERR: 54 | #define __pfn_to_page(pfn) (vmemmap + (pfn))
BUILDSTDERR: | ^~~~~~~
BUILDSTDERR: ./include/asm-generic/memory_model.h:82:21: note: in
expansion of macro '__pfn_to_page'
BUILDSTDERR: 82 | #define pfn_to_page __pfn_to_page
BUILDSTDERR: | ^~~~~~~~~~~~~
BUILDSTDERR: ./arch/riscv/include/asm/pgtable.h:140:9: note: in
expansion of macro 'pfn_to_page'
BUILDSTDERR: 140 | return pfn_to_page(pmd_val(pmd) >> _PAGE_PFN_SHIFT);
> +
> +#define PCI_IO_SIZE SZ_16M
> +#define PCI_IO_END VMEMMAP_START
> +#define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
> +
> +#define FIXADDR_TOP PCI_IO_START
> +#ifdef CONFIG_64BIT
> +#define FIXADDR_SIZE PMD_SIZE
> +#else
> +#define FIXADDR_SIZE PGDIR_SIZE
> +#endif
> +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
>
> /*
> * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
> @@ -446,6 +433,31 @@ extern void paging_init(void);
> #define TASK_SIZE FIXADDR_START
> #endif
>
> +#else /* CONFIG_MMU */
> +
> +#define PAGE_KERNEL __pgprot(0)
> +#define swapper_pg_dir NULL
> +#define VMALLOC_START 0
> +
> +#define TASK_SIZE 0xffffffffUL
> +
> +#endif /* !CONFIG_MMU */
> +
> +#define kern_addr_valid(addr) (1) /* FIXME */
> +
> +extern void *dtb_early_va;
> +void setup_bootmem(void);
> +void paging_init(void);
> +
> +#define FIRST_USER_ADDRESS 0
> +
> +/*
> + * ZERO_PAGE is a global shared page that is always zero,
> + * used for zero-mapped memory areas, etc.
> + */
> +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
> +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
> +
> #include <asm-generic/pgtable.h>
>
> #endif /* !__ASSEMBLY__ */