RE: [EXT] Re: [v11 2/2] clk: ls1028a: Add clock driver for Display output interface

[Wen He]

> -----Original Message-----
> From: Stephen Boyd <sboyd@xxxxxxxxxx>
> Sent: 2019å12æ17æ 1:56
> To: Leo Li <leoyang.li@xxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>;
> Michael Turquette <mturquette@xxxxxxxxxxxx>; Michael Walle
> <michael@xxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Wen He
> <wen.he_1@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx
> Subject: [EXT] Re: [v11 2/2] clk: ls1028a: Add clock driver for Display output
> interface
> 
> Caution: EXT Email
> 
> Quoting Michael Walle (2019-12-12 16:06:16)
> > Am 12. Dezember 2019 23:18:16 MEZ schrieb Stephen Boyd
> <sboyd@xxxxxxxxxx>:
> > >Quoting Wen He (2019-12-04 23:26:53)
> > >> Add clock driver for QorIQ LS1028A Display output interfaces(LCD,
> > >DPHY),
> > >> as implemented in TSMC CLN28HPM PLL, this PLL supports the
> > >programmable
> > >> integer division and range of the display output pixel clock's
> > >27-594MHz.
> > >>
> > >> Signed-off-by: Wen He <wen.he_1@xxxxxxx>
> > >> Signed-off-by: Michael Walle <michael@xxxxxxxx>
> > >
> > >Is Michael the author? SoB chain is backwards here.
> >
> > the original driver was from Wen. I've just supplied some code and the
> > vco frequency stuff. so its basically a sob of us both.
> >
> > -michael
> 
> Ok. That's a Co-developed-by: tag then. Thanks for letting us know.

The v12 version patch was sent out.
Does need I change the author sign to below?

Co-developed-by: Wen He <wen.he_1@xxxxxxx>
Signed-off-by: Wen He <wen.he_1@xxxxxxx>
Co-developed-by: Michael Walle <michael.@xxxxxxxx>
Signed-off-by: Michael Walle <michael.@xxxxxxxx>
Signed-off-by: Wen He <wen.he_1@xxxxxxx>

Best Regards,
Wen