[PATCH net v3 8/9] net: stmmac: Enable 16KB buffer size

From: Jose Abreu
Date: Wed Dec 18 2019 - 05:17:58 EST


XGMAC supports maximum MTU that can go to 16KB. Lets add this check in
the calculation of RX buffer size.

Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver")
Signed-off-by: Jose Abreu <Jose.Abreu@xxxxxxxxxxxx>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Cc: Jose Abreu <joabreu@xxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index f507a9bee15b..1cb466dd5b3f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1109,7 +1109,9 @@ static int stmmac_set_bfsize(int mtu, int bufsize)
{
int ret = bufsize;

- if (mtu >= BUF_SIZE_4KiB)
+ if (mtu >= BUF_SIZE_8KiB)
+ ret = BUF_SIZE_16KiB;
+ else if (mtu >= BUF_SIZE_4KiB)
ret = BUF_SIZE_8KiB;
else if (mtu >= BUF_SIZE_2KiB)
ret = BUF_SIZE_4KiB;
--
2.7.4