[PATCH v2 10/11] hwmon: (scmi-hwmon) Match scmi device by both name and protocol id

[Sudeep Holla]

The scmi bus now has support to match the driver with devices not only
based on their protocol id but also based on their device name if one is
available. This was added to cater the need to support multiple devices
and drivers for the same protocol.

Let us add the name "hwmon" to scmi_device_id table in the driver so
that in matches only with device with the same name and protocol id
SCMI_PROTOCOL_SENSOR. This is just for sake of completion and must
not be used to add IIO support in parallel. Instead, if IIO support is
added ever in future, we need to drop this hwmon driver entirely and
use the iio->hwmon bridge to access the sensors as hwmon devices if
needed.

Cc: Guenter Roeck <linux@xxxxxxxxxxxx>
Cc: linux-hwmon@xxxxxxxxxxxxxxx
Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx>
---
 drivers/hwmon/scmi-hwmon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index 8a7732c0bef3..286d3cfda7de 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -259,7 +259,7 @@ static int scmi_hwmon_probe(struct scmi_device *sdev)
 }
 
 static const struct scmi_device_id scmi_id_table[] = {
-	{ SCMI_PROTOCOL_SENSOR },
+	{ SCMI_PROTOCOL_SENSOR, "hwmon" },
 	{ },
 };
 MODULE_DEVICE_TABLE(scmi, scmi_id_table);
-- 
2.17.1