Re: [PATCH v7 6/7] arm64: dts: allwinner: h6: Add thermal sensor and thermal zones

[Chen-Yu Tsai]

On Thu, Dec 19, 2019 at 9:42 AM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
>
> On Wed, Dec 18, 2019 at 5:03 PM OndÅej Jirman <megous@xxxxxxxxxx> wrote:
> >
> > On Wed, Dec 18, 2019 at 03:18:51PM -0800, Vasily Khoruzhick wrote:
> > > On Tue, Dec 17, 2019 at 8:32 PM Chen-Yu Tsai <wens@xxxxxxxx> wrote:
> > > >
> > > > On Wed, Dec 18, 2019 at 12:22 PM Vasily Khoruzhick <anarsoul@xxxxxxxxx> wrote:
> > > > >
> > > > > From: Ondrej Jirman <megous@xxxxxxxxxx>
> > > > >
> > > > > There are two sensors, one for CPU, one for GPU.
> > > > >
> > > > > Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> > > > > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> > > > > ---
> > > > >  arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++
> > > > >  1 file changed, 33 insertions(+)
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > index 29824081b43b..cdcb1a36301a 100644
> > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> > > > > @@ -11,6 +11,7 @@
> > > > >  #include <dt-bindings/reset/sun50i-h6-ccu.h>
> > > > >  #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
> > > > >  #include <dt-bindings/reset/sun8i-de2.h>
> > > > > +#include <dt-bindings/thermal/thermal.h>
> > > > >
> > > > >  / {
> > > > >         interrupt-parent = <&gic>;
> > > > > @@ -233,6 +234,12 @@ dma: dma-controller@3002000 {
> > > > >                 sid: efuse@3006000 {
> > > > >                         compatible = "allwinner,sun50i-h6-sid";
> > > > >                         reg = <0x03006000 0x400>;
> > > > > +                       #address-cells = <1>;
> > > > > +                       #size-cells = <1>;
> > > > > +
> > > > > +                       ths_calibration: thermal-sensor-calibration@14 {
> > > > > +                               reg = <0x14 0x6>;
> > > >
> > > > Nit: my preference is to use words as the smallest increment, so this
> > > > would have a size of 8 instead of 6. Same goes for the A64 dts.
> > > >
> > > > AFAICT this doesn't impact the driver in any way.
> > >
> > > H6 has only 2 sensors, so it should be 4. That's my overlook, I'll
> > > change it to 4 for H6 and to 8 for A64.
> >
> > No it's correct. There's 2 bytes reference temperature and 2x 2 byte
> > values for individual sensor calibration constants.
>
> So it should be 8 if we round it up to word boundary?

That is correct.

> > regards,
> >         o.
> >
> > > >
> > > > ChenYu
> > > >
> > > >
> > > > > +                       };
> > > > >                 };
> > > > >
> > > > >                 watchdog: watchdog@30090a0 {
> > > > > @@ -856,5 +863,31 @@ r_i2c: i2c@7081400 {
> > > > >                         #address-cells = <1>;
> > > > >                         #size-cells = <0>;
> > > > >                 };
> > > > > +
> > > > > +               ths: thermal-sensor@5070400 {
> > > > > +                       compatible = "allwinner,sun50i-h6-ths";
> > > > > +                       reg = <0x05070400 0x100>;
> > > > > +                       interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
> > > > > +                       clocks = <&ccu CLK_BUS_THS>;
> > > > > +                       clock-names = "bus";
> > > > > +                       resets = <&ccu RST_BUS_THS>;
> > > > > +                       nvmem-cells = <&ths_calibration>;
> > > > > +                       nvmem-cell-names = "calibration";
> > > > > +                       #thermal-sensor-cells = <1>;
> > > > > +               };
> > > > > +       };
> > > > > +
> > > > > +       thermal-zones {
> > > > > +               cpu-thermal {
> > > > > +                       polling-delay-passive = <0>;
> > > > > +                       polling-delay = <0>;
> > > > > +                       thermal-sensors = <&ths 0>;
> > > > > +               };
> > > > > +
> > > > > +               gpu-thermal {
> > > > > +                       polling-delay-passive = <0>;
> > > > > +                       polling-delay = <0>;
> > > > > +                       thermal-sensors = <&ths 1>;
> > > > > +               };
> > > > >         };
> > > > >  };
> > > > > --
> > > > > 2.24.1
> > > > >
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel