Re: [PATCH 04/10] rtc: at91rm9200: use of_platform_populate as return value

From: Eugen.Hristev
Date: Thu Dec 19 2019 - 04:15:14 EST




On 18.12.2019 18:58, Alexandre Belloni wrote:
> On 18/12/2019 16:52:21+0000, Eugen.Hristev@xxxxxxxxxxxxx wrote:
>>
>>
>> On 18.12.2019 18:43, Alexandre Belloni wrote:
>>
>>> Hi,
>>>
>>> On 18/12/2019 16:24:00+0000, Eugen.Hristev@xxxxxxxxxxxxx wrote:
>>>> From: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>>>>
>>>> This allows the RTC node to have child nodes in DT.
>>>> This allows subnodes to be probed.
>>>>
>>>> Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
>>>> ---
>>>> drivers/rtc/rtc-at91rm9200.c | 2 +-
>>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
>>>> index 3b833e0..f1b5b3d 100644
>>>> --- a/drivers/rtc/rtc-at91rm9200.c
>>>> +++ b/drivers/rtc/rtc-at91rm9200.c
>>>> @@ -421,7 +421,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
>>>> at91_rtc_write_ier(AT91_RTC_SECEV);
>>>>
>>>> dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n");
>>>> - return 0;
>>>> + return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
>>>>
>>>
>>> You can avoid the DT binding change and DT parsing by using
>>> platform_add_device here. I don't think there is any point describing
>>> the trigger as a child node (a watchdog functionality wouldn't be
>>> described for example).
>>>
>>
>> Hi,
>>
>> It's needed because the ADC needs a link to the trigger device. This is
>> a hardware link inside the SoC, so I thought the best way is to describe
>> this hardware is in the Device Tree.
>> Otherwise the ADC node is unaware of the RTC triggering possibility.
>> If we just assign the RTC trigger device to the ADC through the sysfs,
>> the ADC cannot distinguish between the RTC trigger and other various
>> triggers which can be attached.
>>
>
> I'm not sure this links is required but I will let Jonathan review. Even
> if it is needed, you can still use the rtc node to describe that link.

Actually, the RTC node could potentially have two different ADC
triggers. There is another OUT1 field that can do a second trigger for
the ADC only for the last channel. Future development might add this
trigger, so, with that in mind, I think it's best to link the exact
trigger and not the RTC node.

>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>