[PATCH] usb: mtk-xhci: Do not explicitly set the DMA mask

[Tomasz Figa]

The mtk-xhci platform glue sets the DMA mask to 32 bits on its own,
which was needed before commit fda182d80a0b ("usb: xhci: configure
32-bit DMA if the controller does not support 64-bit DMA"), but now it
has no effect, because xhci_gen_setup() sets it up for us according to
hardware capabilities. Remove the useless code.

Signed-off-by: Tomasz Figa <tfiga@xxxxxxxxxxxx>
---
 drivers/usb/host/xhci-mtk.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index b18a6baef204a..bfbdb3ceed291 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -488,11 +488,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		goto disable_clk;
 	}
 
-	/* Initialize dma_mask and coherent_dma_mask to 32-bits */
-	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
-	if (ret)
-		goto disable_clk;
-
 	hcd = usb_create_hcd(driver, dev, dev_name(dev));
 	if (!hcd) {
 		ret = -ENOMEM;
-- 
2.24.1.735.g03f4e72817-goog