Re: [PATCH v4 4/4] powerpc: Book3S 64-bit "heavyweight" KASAN support

[Daniel Axtens]

Christophe Leroy <christophe.leroy@xxxxxx> writes:

> Le 19/12/2019 Ã 10:50, Daniel Axtens a ÃcritÂ:
>> Christophe Leroy <christophe.leroy@xxxxxx> writes:
>> 
>>> On 12/19/2019 12:36 AM, Daniel Axtens wrote:
>>>> KASAN support on Book3S is a bit tricky to get right:
>>>>
>>>>    - It would be good to support inline instrumentation so as to be able to
>>>>      catch stack issues that cannot be caught with outline mode.
>>>>
>>>>    - Inline instrumentation requires a fixed offset.
>>>>
>>>>    - Book3S runs code in real mode after booting. Most notably a lot of KVM
>>>>      runs in real mode, and it would be good to be able to instrument it.
>>>>
>>>>    - Because code runs in real mode after boot, the offset has to point to
>>>>      valid memory both in and out of real mode.
>>>>
>>>>       [ppc64 mm note: The kernel installs a linear mapping at effective
>>>>       address c000... onward. This is a one-to-one mapping with physical
>>>>       memory from 0000... onward. Because of how memory accesses work on
>>>>       powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
>>>>       same memory both with translations on (accessing as an 'effective
>>>>       address'), and with translations off (accessing as a 'real
>>>>       address'). This works in both guests and the hypervisor. For more
>>>>       details, see s5.7 of Book III of version 3 of the ISA, in particular
>>>>       the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
>>>>       KASAN implementation currently only supports Radix.]
>>>>
>>>> One approach is just to give up on inline instrumentation. This way all
>>>> checks can be delayed until after everything set is up correctly, and the
>>>> address-to-shadow calculations can be overridden. However, the features and
>>>> speed boost provided by inline instrumentation are worth trying to do
>>>> better.
>>>>
>>>> If _at compile time_ it is known how much contiguous physical memory a
>>>> system has, the top 1/8th of the first block of physical memory can be set
>>>> aside for the shadow. This is a big hammer and comes with 3 big
>>>> consequences:
>>>>
>>>>    - there's no nice way to handle physically discontiguous memory, so only
>>>>      the first physical memory block can be used.
>>>>
>>>>    - kernels will simply fail to boot on machines with less memory than
>>>>      specified when compiling.
>>>>
>>>>    - kernels running on machines with more memory than specified when
>>>>      compiling will simply ignore the extra memory.
>>>>
>>>> Implement and document KASAN this way. The current implementation is Radix
>>>> only.
>>>>
>>>> Despite the limitations, it can still find bugs,
>>>> e.g. http://patchwork.ozlabs.org/patch/1103775/
>>>>
>>>> At the moment, this physical memory limit must be set _even for outline
>>>> mode_. This may be changed in a later series - a different implementation
>>>> could be added for outline mode that dynamically allocates shadow at a
>>>> fixed offset. For example, see https://patchwork.ozlabs.org/patch/795211/
>>>>
>>>> Suggested-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx>
>>>> Cc: Balbir Singh <bsingharora@xxxxxxxxx> # ppc64 out-of-line radix version
>>>> Cc: Christophe Leroy <christophe.leroy@xxxxxx> # ppc32 version
>>>> Signed-off-by: Daniel Axtens <dja@xxxxxxxxxx>
>>>>
>>>> ---
>>>> Changes since v3:
>>>>    - Address further feedback from Christophe.
>>>>    - Drop changes to stack walking, it looks like the issue I observed is
>>>>      related to that particular stack, not stack-walking generally.
>>>>
>>>> Changes since v2:
>>>>
>>>>    - Address feedback from Christophe around cleanups and docs.
>>>>    - Address feedback from Balbir: at this point I don't have a good solution
>>>>      for the issues you identify around the limitations of the inline implementation
>>>>      but I think that it's worth trying to get the stack instrumentation support.
>>>>      I'm happy to have an alternative and more flexible outline mode - I had
>>>>      envisoned this would be called 'lightweight' mode as it imposes fewer restrictions.
>>>>      I've linked to your implementation. I think it's best to add it in a follow-up series.
>>>>    - Made the default PHYS_MEM_SIZE_FOR_KASAN value 1024MB. I think most people have
>>>>      guests with at least that much memory in the Radix 64s case so it's a much
>>>>      saner default - it means that if you just turn on KASAN without reading the
>>>>      docs you're much more likely to have a bootable kernel, which you will never
>>>>      have if the value is set to zero! I'm happy to bikeshed the value if we want.
>>>>
>>>> Changes since v1:
>>>>    - Landed kasan vmalloc support upstream
>>>>    - Lots of feedback from Christophe.
>>>>
>>>> Changes since the rfc:
>>>>
>>>>    - Boots real and virtual hardware, kvm works.
>>>>
>>>>    - disabled reporting when we're checking the stack for exception
>>>>      frames. The behaviour isn't wrong, just incompatible with KASAN.
>>>>
>>>>    - Documentation!
>>>>
>>>>    - Dropped old module stuff in favour of KASAN_VMALLOC.
>>>>
>>>> The bugs with ftrace and kuap were due to kernel bloat pushing
>>>> prom_init calls to be done via the plt. Because we did not have
>>>> a relocatable kernel, and they are done very early, this caused
>>>> everything to explode. Compile with CONFIG_RELOCATABLE!
>>>> ---
>>>>    Documentation/dev-tools/kasan.rst            |   8 +-
>>>>    Documentation/powerpc/kasan.txt              | 112 ++++++++++++++++++-
>>>>    arch/powerpc/Kconfig                         |   2 +
>>>>    arch/powerpc/Kconfig.debug                   |  21 ++++
>>>>    arch/powerpc/Makefile                        |  11 ++
>>>>    arch/powerpc/include/asm/book3s/64/hash.h    |   4 +
>>>>    arch/powerpc/include/asm/book3s/64/pgtable.h |   7 ++
>>>>    arch/powerpc/include/asm/book3s/64/radix.h   |   5 +
>>>>    arch/powerpc/include/asm/kasan.h             |  21 +++-
>>>>    arch/powerpc/kernel/prom.c                   |  61 +++++++++-
>>>>    arch/powerpc/mm/kasan/Makefile               |   1 +
>>>>    arch/powerpc/mm/kasan/init_book3s_64.c       |  70 ++++++++++++
>>>>    arch/powerpc/platforms/Kconfig.cputype       |   1 +
>>>>    13 files changed, 316 insertions(+), 8 deletions(-)
>>>>    create mode 100644 arch/powerpc/mm/kasan/init_book3s_64.c
>>>>
>>>> diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
>>>> index 296e51c2f066..f18268cbdc33 100644
>>>> --- a/arch/powerpc/include/asm/kasan.h
>>>> +++ b/arch/powerpc/include/asm/kasan.h
>>>> @@ -2,6 +2,9 @@
>>>>    #ifndef __ASM_KASAN_H
>>>>    #define __ASM_KASAN_H
>>>>    
>>>> +#include <asm/page.h>
>>>> +#include <asm/pgtable.h>
>>>
>>> What do you need asm/pgtable.h for ?
>>>
>>> Build failure due to circular inclusion of asm/pgtable.h:
>> 
>> I see there's a lot of ppc32 stuff, I clearly need to bite the bullet
>> and get a ppc32 toolchain so I can squash these without chewing up any
>> more of your time. I'll sort that out and send a new spin.
>> 
>
> I'm using a powerpc64 toolchain to build both ppc32 and ppc64 kernels 
> (from https://mirrors.edge.kernel.org/pub/tools/crosstool/ )

I am now using the distro toolchain that Ubuntu provides, and I've
reproduced and fixed the 32bit issues you identifed.

> Another thing, did you test PTDUMP stuff with KASAN ? It looks like 
> KASAN address markers don't depend on PPC32, but are only initialised by 
> populate_markers() for PPC32.

Hmm, OK. This is my last workday for the year, so I will look at this
and the simplifications to kasan.h early next year.

Thanks,
Daniel

>
> Regarding kasan.h, I think we should be able to end up with something 
> where the definition of KASAN_SHADOW_OFFSET should only depend on the 
> existence of CONFIG_KASAN_SHADOW_OFFSET, and where only 
> KASAN_SHADOW_SIZE should depend on the target (ie PPC32 or BOOK3S64)
> Everything else should be common. KASAN_END should be START+SIZE.
>
> It looks like what you have called KASAN_SHADOW_SIZE is not similar to 
> what is called KASAN_SHADOW_SIZE for PPC32, as yours only covers the 
> SHADOW_SIZE for linear mem while PPC32 one covers the full space.
>
> Christophe