Re: [Patch V2 01/18] dt-bindings: phy: tegra-xusb: Add usb-role-switch

[Thierry Reding]

On Wed, Dec 18, 2019 at 02:46:14PM +0530, Nagarjuna Kristam wrote:
> Add usb-role-switch property for Tegra210 and Tegra186 platforms. This
> entry is used by XUSB pad controller driver to register for role changes
> for OTG/Peripheral capable USB 2 ports.
> 
> Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
> ---
> V2:
>  - Moved usb-role-switch to seperate Required section as suggested by Thierry.
>  - Added reference to usb/usb-conn-gpio.txt for connector subnode.
> ---
>  .../devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt         | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
> index 9fb682e..23bf354 100644
> --- a/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
> +++ b/Documentation/devicetree/bindings/phy/nvidia,tegra124-xusb-padctl.txt
> @@ -174,6 +174,12 @@ Required properties:
>    - "device": for USB device mode
>    - "otg": for USB OTG mode
>  
> +Required properties for OTG/Peripheral capable USB2 ports:
> +- usb-role-switch: Boolean property to indicate that the port support OTG or

"supports", and also, why if it supports OTG *or* peripheral? Doesn't
OTG imply peripheral? OTG means it can be either peripheral or host,
right? So I think the end of that sentence can be just:

	"... the port supports OTG."

Otherwise:

Acked-by: Thierry Reding <treding@xxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature