[PATCH] dt-bindings: mmc: clarify disable-wp text

[Johan Jonker]

Clarify disable-wp text.
Clean up and add that "disable-wp" is not used in combination
with eMMC or SDIO.

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
 Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
index b130450c3..3c0df4016 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
+++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml
@@ -96,11 +96,10 @@ properties:
     description:
       When set, no physical write-protect line is present. This
       property should only be specified when the controller has a
-      dedicated write-protect detection logic. If a GPIO is always
-      used for the write-protect detection. If a GPIO is always used
+      dedicated write-protect detection logic. If a GPIO is always used
       for the write-protect detection logic, it is sufficient to not
       specify the wp-gpios property in the absence of a write-protect
-      line.
+      line. Not used in combination with eMMC or SDIO.
 
   wp-gpios:
     description:
-- 
2.11.0