Re: [PATCH RESEND 1/4] dt-bindings: drm/bridge: analogix-anx7688: Add ANX7688 transmitter binding

[Laurent Pinchart]

Hi Hsin-Yi,

On Fri, Dec 20, 2019 at 11:20:13AM +0800, Hsin-Yi Wang wrote:
> On Fri, Dec 20, 2019 at 4:45 AM Rob Herring wrote:
> > On Wed, Dec 11, 2019 at 02:19:08PM +0800, Hsin-Yi Wang wrote:
> > > From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> > >
> > > Add support for analogix,anx7688
> > >
> > > Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> > > Signed-off-by: Hsin-Yi Wang <hsinyi@xxxxxxxxxxxx>
> > > ---
> > > Change from RFC to v1:
> > > - txt to yaml
> > > ---
> > >  .../bindings/display/bridge/anx7688.yaml      | 60 +++++++++++++++++++
> > >  1 file changed, 60 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/anx7688.yaml b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > new file mode 100644
> > > index 000000000000..cf79f7cf8fdf
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/bridge/anx7688.yaml
> > > @@ -0,0 +1,60 @@
> > > +# SPDX-License-Identifier: GPL-2.0
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/bridge/anx7688.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Analogix ANX7688 SlimPort (Single-Chip Transmitter for DP over USB-C)
> > > +
> > > +maintainers:
> > > +  - Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
> > > +
> > > +description: |
> > > +  The ANX7688 is a single-chip mobile transmitter to support 4K 60 frames per
> > > +  second (4096x2160p60) or FHD 120 frames per second (1920x1080p120) video
> > > +  resolution from a smartphone or tablet with full function USB-C.
> > > +
> > > +  This binding only describes the HDMI to DP display bridge.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: analogix,anx7688
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: I2C address of the device
> > > +
> > > +  ports:
> > > +    type: object
> > > +
> > > +    properties:
> > > +      port@0:
> > > +        type: object
> > > +        description: |
> > > +          Video port for HDMI input
> > > +
> > > +      port@1:
> > > +        type: object
> > > +        description: |
> > > +          Video port for eDP output
> > > +
> > > +    required:
> > > +      - port@0
> >
> > Sometimes you have no output?
>
> Yes, only input is required.

But what happens in that case ? What's the use of a bridge with a
non-connected output ? :-)

> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - ports
> >
> > The example will have errors because it is missing 'ports'. Run 'make
> > dt_binding_check'.
> >
> > Add:
> >
> > additionalProperties: false
> >
>
> Ack, will fix this. Thanks
>
> > > +
> > > +examples:
> > > +  - |
> > > +    anx7688: anx7688@2c {
> > > +      compatible = "analogix,anx7688";
> > > +      reg = <0x2c>;
> > > +
> > > +      port {
> > > +        anx7688_in: endpoint {
> > > +          remote-endpoint = <&hdmi0_out>;
> > > +        };
> > > +      };
> > > +    };

-- 
Regards,

Laurent Pinchart