Re: [PATCH v10 06/12] soc: mediatek: Use bp_table for all compatibles

From: Weiyi Lu
Date: Thu Dec 19 2019 - 22:31:06 EST


On Thu, 2019-12-19 at 11:54 +0800, Nicolas Boichat wrote:
> On Wed, Dec 18, 2019 at 4:31 PM Weiyi Lu <weiyi.lu@xxxxxxxxxxxx> wrote:
> >
> > Only use bp_table for bus protection of all compatibles,
> > instead of mixing bus_prot_mask and bus_prot_reg_update.
>
> ditto, I'd just squash in the previous patch.
>

OK, I'll update in next version.

> > Signed-off-by: Weiyi Lu <weiyi.lu@xxxxxxxxxxxx>
> > ---
> > drivers/soc/mediatek/mtk-scpsys.c | 94 ++++++++++++++++++++-------------------
> > 1 file changed, 48 insertions(+), 46 deletions(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index 5699d9f..c438c53 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -11,7 +11,6 @@
> > #include <linux/platform_device.h>
> > #include <linux/pm_domain.h>
> > #include <linux/regulator/consumer.h>
> > -#include <linux/soc/mediatek/infracfg.h>
> > #include <linux/soc/mediatek/scpsys-ext.h>
> >
> > #include <dt-bindings/power/mt2701-power.h>
> > @@ -88,7 +87,6 @@
> > * @ctl_offs: The offset for main power control register.
> > * @sram_pdn_bits: The mask for sram power control bits.
> > * @sram_pdn_ack_bits: The mask for sram power control acked bits.
> > - * @bus_prot_mask: The mask for single step bus protection.
> > * @basic_clk_name: The basic clocks required by this power domain.
> > * @caps: The flag for active wake-up action.
> > * @bp_table: The mask table for multiple step bus protection.
> > @@ -99,7 +97,6 @@ struct scp_domain_data {
> > int ctl_offs;
> > u32 sram_pdn_bits;
> > u32 sram_pdn_ack_bits;
> > - u32 bus_prot_mask;
> > const char *basic_clk_name[MAX_CLKS];
> > u8 caps;
> > struct bus_prot bp_table[MAX_STEPS];
> > @@ -128,7 +125,6 @@ struct scp {
> > struct regmap *infracfg;
> > struct regmap *smi_common;
> > struct scp_ctrl_reg ctrl_reg;
> > - bool bus_prot_reg_update;
> > };
> >
> > struct scp_subdomain {
> > @@ -142,7 +138,6 @@ struct scp_soc_data {
> > const struct scp_subdomain *subdomains;
> > int num_subdomains;
> > const struct scp_ctrl_reg regs;
> > - bool bus_prot_reg_update;
> > };
> >
> > static int scpsys_domain_is_on(struct scp_domain *scpd)
> > @@ -256,12 +251,6 @@ static int scpsys_bus_protect_enable(struct scp_domain *scpd)
> > {
> > struct scp *scp = scpd->scp;
> >
> > - if (scpd->data->bus_prot_mask) {
> > - return mtk_infracfg_set_bus_protection(scp->infracfg,
> > - scpd->data->bus_prot_mask,
> > - scp->bus_prot_reg_update);
> > - }
> > -
> > return mtk_scpsys_ext_set_bus_protection(scpd->data->bp_table,
> > scp->infracfg, scp->smi_common);
> > }
> > @@ -270,12 +259,6 @@ static int scpsys_bus_protect_disable(struct scp_domain *scpd)
> > {
> > struct scp *scp = scpd->scp;
> >
> > - if (scpd->data->bus_prot_mask) {
> > - return mtk_infracfg_clear_bus_protection(scp->infracfg,
> > - scpd->data->bus_prot_mask,
> > - scp->bus_prot_reg_update);
> > - }
> > -
> > return mtk_scpsys_ext_clear_bus_protection(scpd->data->bp_table,
> > scp->infracfg, scp->smi_common);
> > }
> > @@ -412,8 +395,7 @@ static int init_basic_clks(struct platform_device *pdev, struct clk **clk,
> >
> > static struct scp *init_scp(struct platform_device *pdev,
> > const struct scp_domain_data *scp_domain_data, int num,
> > - const struct scp_ctrl_reg *scp_ctrl_reg,
> > - bool bus_prot_reg_update)
> > + const struct scp_ctrl_reg *scp_ctrl_reg)
> > {
> > struct genpd_onecell_data *pd_data;
> > struct resource *res;
> > @@ -427,8 +409,6 @@ static struct scp *init_scp(struct platform_device *pdev,
> > scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs;
> > scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs;
> >
> > - scp->bus_prot_reg_update = bus_prot_reg_update;
> > -
> > scp->dev = &pdev->dev;
> >
> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > @@ -549,8 +529,10 @@ static void mtk_register_power_domains(struct platform_device *pdev,
> > .name = "conn",
> > .sta_mask = PWR_STATUS_CONN,
> > .ctl_offs = SPM_CONN_PWR_CON,
> > - .bus_prot_mask = MT2701_TOP_AXI_PROT_EN_CONN_M |
> > - MT2701_TOP_AXI_PROT_EN_CONN_S,
> > + .bp_table = {
> > + BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> > + BIT(2) | BIT(8), BIT(2) | BIT(8)),
> > + },
>
> I'm a bit sad we lose the information about the BIT meaning.
>

I'll keep those information in next version.

> Of course this looks ugly and verbose:
> BUS_PROT(IFR_TYPE, 0, 0, 0x220, 0x228,
> MT2701_TOP_AXI_PROT_EN_CONN_M |
> MT2701_TOP_AXI_PROT_EN_CONN_S,
> MT2701_TOP_AXI_PROT_EN_CONN_M |
> MT2701_TOP_AXI_PROT_EN_CONN_S),
>
> But if you make "check_clr_mask" a boolean, you wouldn't have to
> repeat the mask twice and you could keep the nice register bit
> definitions.
>

Thanks for the suggestion, I'll add "ignore_clr_ack" for it in next
version.

> [snip, many similar occurences below]