[PATCH v2 2/2] arm64: dts: qcom: msm8996: Use generic QMP driver for UFS

[Bjorn Andersson]

With support for the MSM8996 UFS PHY added to the common QMP driver,
migrate the DTS to use the common QMP binding.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---

Changes since v1:
- None

 arch/arm64/boot/dts/qcom/msm8996.dtsi | 33 +++++++++++++++------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b302d2451007..330a1e7cb7d8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1323,27 +1323,30 @@ spmi_bus: qcom,spmi@400f000 {
 			#interrupt-cells = <4>;
 		};
 
-		ufsphy: phy@627000 {
-			compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
-			reg = <0x627000 0xda8>;
-			reg-names = "phy_mem";
-			#phy-cells = <0>;
+		ufs_phy: phy@627000 {
+			compatible = "qcom,msm8996-qmp-ufs-phy";
+			reg = <0x00627000 0x1c4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 
 			vdda-phy-supply = <&pm8994_l28>;
 			vdda-pll-supply = <&pm8994_l12>;
-
-			vdda-phy-max-microamp = <18380>;
-			vdda-pll-max-microamp = <9440>;
-
 			vddp-ref-clk-supply = <&pm8994_l25>;
-			vddp-ref-clk-max-microamp = <100>;
-			vddp-ref-clk-always-on;
 
-			clock-names = "ref_clk_src", "ref_clk";
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
-				 <&gcc GCC_UFS_CLKREF_CLK>;
+			clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+			clock-names = "ref";
+
 			resets = <&ufshc 0>;
+			reset-names = "ufsphy";
 			status = "disabled";
+
+			ufs_phy_lane: lanes@627400 {
+				reg = <0x627400 0x12c>,
+				      <0x627600 0x200>,
+				      <0x627c00 0x1b4>;
+				#phy-cells = <0>;
+			};
 		};
 
 		ufshc: ufshc@624000 {
@@ -1351,7 +1354,7 @@ ufshc: ufshc@624000 {
 			reg = <0x624000 0x2500>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 
-			phys = <&ufsphy>;
+			phys = <&ufs_phy_lane>;
 			phy-names = "ufsphy";
 
 			vcc-supply = <&pm8994_l20>;
-- 
2.24.0