[PATCH 1/2] dt-bindings: phy: Add YAML schemas for Intel Combo phy

[Dilip Kota]

Combo phy subsystem provides PHY support to number of
controllers, viz. PCIe, SATA and EMAC.
Adding YAML schemas for the same.

Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/phy/intel,combo-phy.yaml   | 147 +++++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/intel,combo-phy.yaml

diff --git a/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
new file mode 100644
index 000000000000..fc9cbad9dd88
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/intel,combo-phy.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/intel,combo-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel Combo phy Subsystem
+
+maintainers:
+  - Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
+
+description: |
+  Intel combo phy subsystem supports PHYs for PCIe, EMAC and SATA
+  controllers. A single combo phy provides two PHY instances.
+
+properties:
+  $nodename:
+    pattern: "^combophy@[0-9]+$"
+
+  compatible:
+    items:
+      - const: intel,combo-phy
+      - const: simple-bus
+
+  cell-index:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Index of Combo phy hardware instance.
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: core
+
+  intel,syscfg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Chip configuration registers handle
+
+  intel,hsio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: HSIO registers handle
+
+  intel,bid:
+    description: Index of HSIO bus
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - minimum: 0
+      - maximum: 1
+
+  intel,cap-pcie-only:
+    description: |
+      This flag specifies capability of the combo phy.
+      If it is set, combo phy has only PCIe capability.
+      Else it has PCIe, XPCS and SATA PHY capabilities.
+    type: boolean
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^cb[0-9]phy@[0-9]+$":
+    type: object
+
+    properties:
+      compatible:
+        const: intel,phydev
+
+      "#phy-cells":
+        const: 0
+
+      reg:
+        description: Offset and size of pcie phy control registers
+
+      intel,phy-mode:
+        description: |
+          Configure the mode of the PHY.
+            0 - PCIe
+            1 - xpcs
+            2 - sata
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/uint32
+          - minimum: 0
+          - maximum: 2
+
+      clocks:
+        description: |
+          List of phandle and clock specifier pairs as listed
+          in clock-names property. Configure the clocks according
+          to the PHY mode.
+
+      resets:
+        description: |
+          reset handle according to the PHY mode.
+          See ../reset/reset.txt for details.
+
+    required:
+      - compatible
+      - reg
+      - "#phy-cells"
+      - clocks
+      - intel,phy-mode
+
+required:
+  - compatible
+  - cell-index
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - intel,syscfg
+  - intel,hsio
+  - intel,bid
+
+additionalProperties: false
+
+examples:
+  - |
+    combophy@0 {
+        compatible = "intel,combo-phy", "simple-bus";
+        cell-index = <0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+        resets = <&rcu0 0x50 6>,
+        	 <&rcu0 0x50 17>;
+        reset-names = "phy", "core";
+        intel,syscfg = <&sysconf>;
+        intel,hsio = <&hsiol>;
+        intel,bid = <0>;
+
+        cb0phy0:cb0phy@0 {
+            compatible = "intel,phydev";
+            #phy-cells = <0>;
+            reg = <0xd0a40000 0x1000>;
+            clocks = <&cgu0 1>;
+            resets = <&rcu0 0x50 23>;
+            intel,phy-mode = <0>;
+        };
+    };
+
+
-- 
2.11.0