[PATCH v2 3/5] phy: qcom-qmp: Add optional SW reset
From: Vinod Koul
Date: Fri Dec 20 2019 - 05:17:52 EST
For V4 QMP UFS Phy, we need to assert reset bits, configure the phy and
then deassert it, so add optional has_sw_reset flag and use that to
configure the QPHY_SW_RESET register.
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 1196c85aa023..47a66d55107d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -168,6 +168,7 @@ static const unsigned int sdm845_ufsphy_regs_layout[] = {
static const unsigned int sm8150_ufsphy_regs_layout[] = {
[QPHY_START_CTRL] = QPHY_V4_PHY_START,
[QPHY_PCS_READY_STATUS] = QPHY_V4_PCS_READY_STATUS,
+ [QPHY_SW_RESET] = QPHY_V4_SW_RESET,
};
static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
@@ -1023,6 +1024,9 @@ struct qmp_phy_cfg {
/* true, if PCS block has no separate SW_RESET register */
bool no_pcs_sw_reset;
+
+ /* true if sw reset needs to be invoked */
+ bool has_sw_reset;
};
/**
@@ -1391,6 +1395,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = {
.is_dual_lane_phy = true,
.no_pcs_sw_reset = true,
+ .has_sw_reset = true,
};
static void qcom_qmp_phy_configure(void __iomem *base,
@@ -1475,6 +1480,9 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
}
+ if (cfg->has_sw_reset)
+ qphy_setbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
if (cfg->has_phy_com_ctrl)
qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
SW_PWRDN);
@@ -1651,6 +1659,9 @@ static int qcom_qmp_phy_enable(struct phy *phy)
if (cfg->has_phy_dp_com_ctrl)
qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
+ if (cfg->has_sw_reset)
+ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
+
/* start SerDes and Phy-Coding-Sublayer */
qphy_setbits(pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
--
2.23.0