[PATCH] arm64: dts: rockchip: rk3368-lion-haikou: remove identical &uart0 node

From: Johan Jonker
Date: Fri Dec 20 2019 - 07:55:31 EST


Remove identical &uart0 node.
Sort nodes in alphabetical order.

Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
---
.../arm64/boot/dts/rockchip/rk3368-lion-haikou.dts | 76 ++++++++++------------
1 file changed, 35 insertions(+), 41 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index 8251f3c0d..93601fe05 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -64,47 +64,6 @@
};
};

-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <25000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- rockchip,default-sample-phase = <90>;
- vmmc-supply = <&vcc3v3_baseboard>;
- status = "okay";
-};
-
-&spi2 {
- cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&uart1 {
- /* alternate function of GPIO5/6 */
- status = "disabled";
-};
-
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&haikou_pin_hog>;
@@ -144,3 +103,38 @@
};
};
};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <25000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ rockchip,default-sample-phase = <90>;
+ vmmc-supply = <&vcc3v3_baseboard>;
+ status = "okay";
+};
+
+&spi2 {
+ cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "okay";
+};
+
+&uart1 {
+ /* alternate function of GPIO5/6 */
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
--
2.11.0