[PATCH v5 04/19] dt-bindings: tegra: Convert Tegra PMC bindings to YAML
From: Sowjanya Komatineni
Date: Fri Dec 20 2019 - 17:28:16 EST
This patch converts text based Tegra PMC bindings document to YAML
schema for performing dt validation.
Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
.../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 300 ------------------
.../bindings/arm/tegra/nvidia,tegra20-pmc.yaml | 345 +++++++++++++++++++++
2 files changed, 345 insertions(+), 300 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
create mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
deleted file mode 100644
index cb12f33a247f..000000000000
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
+++ /dev/null
@@ -1,300 +0,0 @@
-NVIDIA Tegra Power Management Controller (PMC)
-
-== Power Management Controller Node ==
-
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
-- name : Should be pmc
-- compatible : Should contain one of the following:
- For Tegra20 must contain "nvidia,tegra20-pmc".
- For Tegra30 must contain "nvidia,tegra30-pmc".
- For Tegra114 must contain "nvidia,tegra114-pmc"
- For Tegra124 must contain "nvidia,tegra124-pmc"
- For Tegra132 must contain "nvidia,tegra124-pmc"
- For Tegra210 must contain "nvidia,tegra210-pmc"
-- reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names : Must include the following entries:
- "pclk" (The Tegra clock of that name),
- "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
-- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
- The PMU is an external Power Management Unit, whose interrupt output
- signal is fed into the PMC. This signal is optionally inverted, and then
- fed into the ARM GIC. The PMC is not involved in the detection or
- handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
- Valid values are 0, 1 and 2:
- 0 (LP0): CPU + Core voltage off and DRAM in self-refresh
- 1 (LP1): CPU voltage off and DRAM in self-refresh
- 2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
- is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
- Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
- The LP0 vector contains the warm boot code that is executed by AVP when
- resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
- processor and always being the first boot processor when chip is power on
- or resume from deep sleep mode. When the system is resumed from the deep
- sleep mode, the warm boot code will restore some PLLs, clocks and then
- bring up CPU0 for resuming the system.
-
-Hardware-triggered thermal reset:
-On Tegra30, Tegra114 and Tegra124, if the 'i2c-thermtrip' subnode exists,
-hardware-triggered thermal reset will be enabled.
-
-Required properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,i2c-controller-id : ID of I2C controller to send poweroff command to. Valid values are
- described in section 9.2.148 "APBDEV_PMC_SCRATCH53_0" of the
- Tegra K1 Technical Reference Manual.
-- nvidia,bus-addr : Bus address of the PMU on the I2C bus
-- nvidia,reg-addr : I2C register address to write poweroff command to
-- nvidia,reg-data : Poweroff command to write to PMU
-
-Optional properties for hardware-triggered thermal reset (inside 'i2c-thermtrip'):
-- nvidia,pinmux-id : Pinmux used by the hardware when issuing poweroff command.
- Defaults to 0. Valid values are described in section 12.5.2
- "Pinmux Support" of the Tegra4 Technical Reference Manual.
-
-Optional nodes:
-- powergates : This node contains a hierarchy of power domain nodes, which
- should match the powergates on the Tegra SoC. See "Powergate
- Nodes" below.
-
-Example:
-
-/ SoC dts including file
-pmc@7000f400 {
- compatible = "nvidia,tegra20-pmc";
- reg = <0x7000e400 0x400>;
- clocks = <&tegra_car 110>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
- nvidia,invert-interrupt;
- nvidia,suspend-mode = <1>;
- nvidia,cpu-pwr-good-time = <2000>;
- nvidia,cpu-pwr-off-time = <100>;
- nvidia,core-pwr-good-time = <3845 3845>;
- nvidia,core-pwr-off-time = <458>;
- nvidia,core-power-req-active-high;
- nvidia,sys-clock-req-active-high;
- nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
- ...
- pmc@7000f400 {
- i2c-thermtrip {
- nvidia,i2c-controller-id = <4>;
- nvidia,bus-addr = <0x40>;
- nvidia,reg-addr = <0x36>;
- nvidia,reg-data = <0x2>;
- };
- };
- ...
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
- ...
-};
-
-
-== Powergate Nodes ==
-
-Each of the powergate nodes represents a power-domain on the Tegra SoC
-that can be power-gated by the Tegra PMC. The name of the powergate node
-should be one of the below. Note that not every powergate is applicable
-to all Tegra devices and the following list shows which powergates are
-applicable to which devices. Please refer to the Tegra TRM for more
-details on the various powergates.
-
- Name Description Devices Applicable
- 3d 3D Graphics Tegra20/114/124/210
- 3d0 3D Graphics 0 Tegra30
- 3d1 3D Graphics 1 Tegra30
- aud Audio Tegra210
- dfd Debug Tegra210
- dis Display A Tegra114/124/210
- disb Display B Tegra114/124/210
- heg 2D Graphics Tegra30/114/124/210
- iram Internal RAM Tegra124/210
- mpe MPEG Encode All
- nvdec NVIDIA Video Decode Engine Tegra210
- nvjpg NVIDIA JPEG Engine Tegra210
- pcie PCIE Tegra20/30/124/210
- sata SATA Tegra30/124/210
- sor Display interfaces Tegra124/210
- ve2 Video Encode Engine 2 Tegra210
- venc Video Encode Engine All
- vdec Video Decode Engine Tegra20/30/114/124
- vic Video Imaging Compositor Tegra124/210
- xusba USB Partition A Tegra114/124/210
- xusbb USB Partition B Tegra114/124/210
- xusbc USB Partition C Tegra114/124/210
-
-Required properties:
- - clocks: Must contain an entry for each clock required by the PMC for
- controlling a power-gate. See ../clocks/clock-bindings.txt for details.
- - resets: Must contain an entry for each reset required by the PMC for
- controlling a power-gate. See ../reset/reset.txt for details.
- - #power-domain-cells: Must be 0.
-
-Example:
-
- pmc: pmc@7000e400 {
- compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
- clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
-
- powergates {
- pd_audio: aud {
- clocks = <&tegra_car TEGRA210_CLK_APE>,
- <&tegra_car TEGRA210_CLK_APB2APE>;
- resets = <&tegra_car 198>;
- #power-domain-cells = <0>;
- };
- };
- };
-
-
-== Powergate Clients ==
-
-Hardware blocks belonging to a power domain should contain a "power-domains"
-property that is a phandle pointing to the corresponding powergate node.
-
-Example:
-
- adma: adma@702e2000 {
- ...
- power-domains = <&pd_audio>;
- ...
- };
-
-== Pad Control ==
-
-On Tegra SoCs a pad is a set of pins which are configured as a group.
-The pin grouping is a fixed attribute of the hardware. The PMC can be
-used to set pad power state and signaling voltage. A pad can be either
-in active or power down mode. The support for power state and signaling
-voltage configuration varies depending on the pad in question. 3.3 V and
-1.8 V signaling voltages are supported on pins where software
-controllable signaling voltage switching is available.
-
-The pad configuration state nodes are placed under the pmc node and they
-are referred to by the pinctrl client properties. For more information
-see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
-The pad name should be used as the value of the pins property in pin
-configuration nodes.
-
-The following pads are present on Tegra124 and Tegra132:
-audio bb cam comp
-csia csb cse dsi
-dsib dsic dsid hdmi
-hsic hv lvds mipi-bias
-nand pex-bias pex-clk1 pex-clk2
-pex-cntrl sdmmc1 sdmmc3 sdmmc4
-sys_ddc uart usb0 usb1
-usb2 usb_bias
-
-The following pads are present on Tegra210:
-audio audio-hv cam csia
-csib csic csid csie
-csif dbg debug-nonao dmic
-dp dsi dsib dsic
-dsid emmc emmc2 gpio
-hdmi hsic lvds mipi-bias
-pex-bias pex-clk1 pex-clk2 pex-cntrl
-sdmmc1 sdmmc3 spi spi-hv
-uart usb0 usb1 usb2
-usb3 usb-bias
-
-Required pin configuration properties:
- - pins: Must contain name of the pad(s) to be configured.
-
-Optional pin configuration properties:
- - low-power-enable: Configure the pad into power down mode
- - low-power-disable: Configure the pad into active mode
- - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
- or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
- The values are defined in
- include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
-
-Note: The power state can be configured on all of the Tegra124 and
- Tegra132 pads. None of the Tegra124 or Tegra132 pads support
- signaling voltage switching.
-
-Note: All of the listed Tegra210 pads except pex-cntrl support power
- state configuration. Signaling voltage switching is supported on
- following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
- pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
-
-Pad configuration state example:
- pmc: pmc@7000e400 {
- compatible = "nvidia,tegra210-pmc";
- reg = <0x0 0x7000e400 0x0 0x400>;
- clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
- clock-names = "pclk", "clk32k_in";
-
- ...
-
- sdmmc1_3v3: sdmmc1-3v3 {
- pins = "sdmmc1";
- power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
- };
-
- sdmmc1_1v8: sdmmc1-1v8 {
- pins = "sdmmc1";
- power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
- };
-
- hdmi_off: hdmi-off {
- pins = "hdmi";
- low-power-enable;
- }
-
- hdmi_on: hdmi-on {
- pins = "hdmi";
- low-power-disable;
- }
- };
-
-Pinctrl client example:
- sdmmc1: sdhci@700b0000 {
- ...
- pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
- pinctrl-0 = <&sdmmc1_3v3>;
- pinctrl-1 = <&sdmmc1_1v8>;
- };
- ...
- sor@54540000 {
- ...
- pinctrl-0 = <&hdmi_off>;
- pinctrl-1 = <&hdmi_on>;
- pinctrl-names = "hdmi-on", "hdmi-off";
- };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
new file mode 100644
index 000000000000..e97eee672ae0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.yaml
@@ -0,0 +1,345 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/tegra/nvidia,tegra20-pmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Power Management Controller (PMC)
+
+maintainers:
+ - Thierry Reding <thierry.reding@xxxxxxxxx>
+ - Jonathan Hunter <jonathanh@xxxxxxxxxx>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra20-pmc
+ - nvidia,tegra20-pmc
+ - nvidia,tegra30-pmc
+ - nvidia,tegra114-pmc
+ - nvidia,tegra124-pmc
+ - nvidia,tegra210-pmc
+
+ reg:
+ maxItems: 1
+ description:
+ Offset and length of the register set for the device.
+
+ clock-names:
+ items:
+ - const: pclk
+ - const: clk32k_in
+ description:
+ Must includes entries pclk and clk32k_in.
+ pclk is the Tegra clock of that name and clk32k_in is 32KHz clock
+ input to Tegra.
+
+ clocks:
+ maxItems: 2
+ description:
+ Must contain an entry for each entry in clock-names.
+ See ../clocks/clocks-bindings.txt for details.
+
+ '#interrupt-cells':
+ const: 2
+ description:
+ Specifies number of cells needed to encode an interrupt source.
+ The value must be 2.
+
+ interrupt-controller: true
+
+ nvidia,invert-interrupt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Inverts the PMU interrupt signal.
+ The PMU is an external Power Management Unit, whose interrupt output
+ signal is fed into the PMC. This signal is optionally inverted, and
+ then fed into the ARM GIC. The PMC is not involved in the detection
+ or handling of this interrupt signal, merely its inversion.
+
+ nvidia,core-power-req-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Core power request active-high.
+
+ nvidia,sys-clock-req-active-high:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: System clock request active-high.
+
+ nvidia,combined-power-req:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: combined power request for CPU and Core.
+
+ nvidia,cpu-pwr-good-en:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ CPU power good signal from external PMIC to PMC is enabled.
+
+ nvidia,suspend-mode:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - enum: [0, 1, 2]
+ description:
+ The suspend mode that the platform should use.
+ Mode 0 is for LP0, CPU + Core voltage off and DRAM in self-refresh
+ Mode 1 is for LP1, CPU voltage off and DRAM in self-refresh
+ Mode 2 is for LP2, CPU voltage off
+
+ nvidia,cpu-pwr-good-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: CPU power good time in uSec.
+
+ nvidia,cpu-pwr-off-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: CPU power off time in uSec.
+
+ nvidia,core-pwr-good-time:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ <Oscillator-stable-time Power-stable-time>
+ Core power good time in uSec.
+
+ nvidia,core-pwr-off-time:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Core power off time in uSec.
+
+ nvidia,lp0-vec:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ description:
+ <start length> Starting address and length of LP0 vector.
+ The LP0 vector contains the warm boot code that is executed
+ by AVP when resuming from the LP0 state.
+ The AVP (Audio-Video Processor) is an ARM7 processor and
+ always being the first boot processor when chip is power on
+ or resume from deep sleep mode. When the system is resumed
+ from the deep sleep mode, the warm boot code will restore
+ some PLLs, clocks and then brings up CPU0 for resuming the
+ system.
+
+ i2c-thermtrip:
+ type: object
+ description:
+ On Tegra30, Tegra114 and Tegra124 if i2c-thermtrip subnode exists,
+ hardware-triggered thermal reset will be enabled.
+
+ properties:
+ nvidia,i2c-controller-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ ID of I2C controller to send poweroff command to PMU.
+ Valid values are described in section 9.2.148
+ "APBDEV_PMC_SCRATCH53_0" of the Tegra K1 Technical Reference
+ Manual.
+
+ nvidia,bus-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Bus address of the PMU on the I2C bus.
+
+ nvidia,reg-addr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: PMU I2C register address to issue poweroff command.
+
+ nvidia,reg-data:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Poweroff command to write to PMU.
+
+ nvidia,pinmux-id:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Pinmux used by the hardware when issuing Poweroff command.
+ Defaults to 0. Valid values are described in section 12.5.2
+ "Pinmux Support" of the Tegra4 Technical Reference Manual.
+
+ required:
+ - nvidia,i2c-controller-id
+ - nvidia,bus-addr
+ - nvidia,reg-addr
+ - nvidia,reg-data
+
+ additionalProperties: false
+
+ powergates:
+ type: object
+ description:
+ This node contains a hierarchy of power domain nodes, which should
+ match the powergates on the Tegra SoC. Each powergate node
+ represents a power-domain on the Tegra SoC that can be power-gated
+ by the Tegra PMC.
+ Hardware blocks belonging to a power domain should contain
+ "power-domains" property that is a phandle pointing to corresponding
+ powergate node.
+ The name of the powergate node should be one of the below. Note that
+ not every powergate is applicable to all Tegra devices and the following
+ list shows which powergates are applicable to which devices.
+ Please refer to Tegra TRM for mode details on the powergate nodes to
+ use for each power-gate block inside Tegra.
+ Name Description Devices Applicable
+ 3d 3D Graphics Tegra20/114/124/210
+ 3d0 3D Graphics 0 Tegra30
+ 3d1 3D Graphics 1 Tegra30
+ aud Audio Tegra210
+ dfd Debug Tegra210
+ dis Display A Tegra114/124/210
+ disb Display B Tegra114/124/210
+ heg 2D Graphics Tegra30/114/124/210
+ iram Internal RAM Tegra124/210
+ mpe MPEG Encode All
+ nvdec NVIDIA Video Decode Engine Tegra210
+ nvjpg NVIDIA JPEG Engine Tegra210
+ pcie PCIE Tegra20/30/124/210
+ sata SATA Tegra30/124/210
+ sor Display interfaces Tegra124/210
+ ve2 Video Encode Engine 2 Tegra210
+ venc Video Encode Engine All
+ vdec Video Decode Engine Tegra20/30/114/124
+ vic Video Imaging Compositor Tegra124/210
+ xusba USB Partition A Tegra114/124/210
+ xusbb USB Partition B Tegra114/124/210
+ xusbc USB Partition C Tegra114/124/210
+
+ patternProperties:
+ "^[a-z0-9]+$":
+ type: object
+
+ patternProperties:
+ clocks:
+ minItems: 1
+ maxItems: 8
+ description:
+ Must contain an entry for each clock required by the PMC
+ for controlling a power-gate.
+ See ../clocks/clock-bindings.txt document for more details.
+
+ resets:
+ minItems: 1
+ maxItems: 8
+ description:
+ Must contain an entry for each reset required by the PMC
+ for controlling a power-gate.
+ See ../reset/reset.txt for more details.
+
+ '#power-domain-cells':
+ const: 0
+ description: Must be 0.
+
+ required:
+ - clocks
+ - resets
+ - '#power-domain-cells'
+
+ additionalProperties: false
+
+patternProperties:
+ "^[a-f0-9]+-[a-f0-9]+$":
+ type: object
+ description:
+ This is a Pad configuration node. On Tegra SOCs a pad is a set of
+ pins which are configured as a group. The pin grouping is a fixed
+ attribute of the hardware. The PMC can be used to set pad power state
+ and signaling voltage. A pad can be either in active or power down mode.
+ The support for power state and signaling voltage configuration varies
+ depending on the pad in question. 3.3V and 1.8V signaling voltages
+ are supported on pins where software controllable signaling voltage
+ switching is available.
+
+ The pad configuration state nodes are placed under the pmc node and they
+ are referred to by the pinctrl client properties. For more information
+ see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+ The pad name should be used as the value of the pins property in pin
+ configuration nodes.
+
+ The following pads are present on Tegra124 and Tegra132
+ audio bb cam comp csia csb
+ cse dsi dsib dsic dsid hdmi
+ hsic hv lvds mipi-bias nand pex-bias
+ pex-clk1 pex-clk2 pex-cntrl sdmmc1 sdmmc3 sdmmc4
+ sys_ddc uart usb0 usb1 usb2 usb_bias
+
+ The following pads are present on Tegra210
+ audio audio-hv cam csia csib csic
+ csid csie csif dbg debug-nonao dmic
+ dp dsi dsib dsic dsid emmc
+ emmc2 gpio hdmi hsic lvds mipi-bias
+ pex-bias pex-clk1 pex-clk2 pex-cntrl sdmmc1 sdmmc3
+ spi spi-hv uart usb0 usb1 usb2
+ usb3 usb-bias
+
+ properties:
+ pins:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Must contain name of the pad(s) to be configured.
+
+ low-power-enable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Configure the pad into power down mode.
+
+ low-power-disable:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: Configure the pad into active mode.
+
+ power-source:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+ TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+ Power state can be configured on all Tegra124 and Tegra132
+ pads. None of the Tegra124 or Tegra132 pads support signaling
+ voltage switching.
+ All of the listed Tegra210 pads except pex-cntrl support power
+ state configuration. Signaling voltage switching is supported
+ on below Tegra210 pads.
+ audio, audio-hv, cam, dbg, dmic, gpio, pex-cntrl, sdmmc1,
+ sdmmc3, spi, spi-hv, and uart.
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clock-names
+ - clocks
+
+dependencies:
+ "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+ "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
+ "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+
+examples:
+ - |
+
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
+
+ tegra_pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <0>;
+ nvidia,cpu-pwr-off-time = <0>;
+ nvidia,core-pwr-good-time = <4587 3876>;
+ nvidia,core-pwr-off-time = <39065>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ powergates {
+ pd_audio: aud {
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ resets = <&tegra_car 198>;
+ #power-domain-cells = <0>;
+ };
+
+ pd_xusbss: xusba {
+ clocks = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+ resets = <&tegra_car TEGRA210_CLK_XUSB_SS>;
+ #power-domain-cells = <0>;
+ };
+ };
+ };
--
2.7.4