Re: [PATCH V2] dt-bindings: geni-se: Convert QUP geni-se bindings to YAML

From: Rob Herring
Date: Fri Dec 20 2019 - 18:20:50 EST

Next message: Rob Herring: "Re: [PATCH] dt-bindings: display: Convert raydium,rm68200 panel to DT schema"
Previous message: John Hubbard: "Re: [PATCH v11 00/25] mm/gup: track dma-pinned pages: FOLL_PIN"
In reply to: Akash Asthana: "[PATCH V2] dt-bindings: geni-se: Convert QUP geni-se bindings to YAML"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Dec 17, 2019 at 03:21:19PM +0530, Akash Asthana wrote:
> Convert QUP geni-se bindings to DT schema format using json-schema.
>
> Signed-off-by: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
> - As per Stephen's comment corrected defintion of interrupts for UART node.
> Any valid UART node must contain atleast 1 interrupts.
>
> .../devicetree/bindings/soc/qcom/qcom,geni-se.txt | 94 ----------
> .../devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 197 +++++++++++++++++++++
> 2 files changed, 197 insertions(+), 94 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
>
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> deleted file mode 100644
> index dab7ca9..0000000
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> +++ /dev/null
> @@ -1,94 +0,0 @@
> -Qualcomm Technologies, Inc. GENI Serial Engine QUP Wrapper Controller
> -
> -Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
> -is a programmable module for supporting a wide range of serial interfaces
> -like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
> -Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
> -Wrapper controller is modeled as a node with zero or more child nodes each
> -representing a serial engine.
> -
> -Required properties:
> -- compatible: Must be "qcom,geni-se-qup".
> -- reg: Must contain QUP register address and length.
> -- clock-names: Must contain "m-ahb" and "s-ahb".
> -- clocks: AHB clocks needed by the device.
> -
> -Required properties if child node exists:
> -- #address-cells: Must be <1> for Serial Engine Address
> -- #size-cells: Must be <1> for Serial Engine Address Size
> -- ranges: Must be present
> -
> -Properties for children:
> -
> -A GENI based QUP wrapper controller node can contain 0 or more child nodes
> -representing serial devices. These serial devices can be a QCOM UART, I2C
> -controller, SPI controller, or some combination of aforementioned devices.
> -Please refer below the child node definitions for the supported serial
> -interface protocols.
> -
> -Qualcomm Technologies Inc. GENI Serial Engine based I2C Controller
> -
> -Required properties:
> -- compatible: Must be "qcom,geni-i2c".
> -- reg: Must contain QUP register address and length.
> -- interrupts: Must contain I2C interrupt.
> -- clock-names: Must contain "se".
> -- clocks: Serial engine core clock needed by the device.
> -- #address-cells: Must be <1> for I2C device address.
> -- #size-cells: Must be <0> as I2C addresses have no size component.
> -
> -Optional property:
> -- clock-frequency: Desired I2C bus clock frequency in Hz.
> - When missing default to 100000Hz.
> -
> -Child nodes should conform to I2C bus binding as described in i2c.txt.
> -
> -Qualcomm Technologies Inc. GENI Serial Engine based UART Controller
> -
> -Required properties:
> -- compatible: Must be "qcom,geni-debug-uart" or "qcom,geni-uart".
> -- reg: Must contain UART register location and length.
> -- interrupts: Must contain UART core interrupts.
> -- clock-names: Must contain "se".
> -- clocks: Serial engine core clock needed by the device.
> -
> -Qualcomm Technologies Inc. GENI Serial Engine based SPI Controller
> -node binding is described in
> -Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.txt.
> -
> -Example:
> - geniqup@8c0000 {
> - compatible = "qcom,geni-se-qup";
> - reg = <0x8c0000 0x6000>;
> - clock-names = "m-ahb", "s-ahb";
> - clocks = <&clock_gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> - <&clock_gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - i2c0: i2c@a94000 {
> - compatible = "qcom,geni-i2c";
> - reg = <0xa94000 0x4000>;
> - interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "se";
> - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S5_CLK>;
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&qup_1_i2c_5_active>;
> - pinctrl-1 = <&qup_1_i2c_5_sleep>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> - };
> -
> - uart0: serial@a88000 {
> - compatible = "qcom,geni-debug-uart";
> - reg = <0xa88000 0x7000>;
> - interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "se";
> - clocks = <&clock_gcc GCC_QUPV3_WRAP0_S0_CLK>;
> - pinctrl-names = "default", "sleep";
> - pinctrl-0 = <&qup_1_uart_3_active>;
> - pinctrl-1 = <&qup_1_uart_3_sleep>;
> - };
> -
> - }
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
> new file mode 100644
> index 0000000..5ba0e0e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
> @@ -0,0 +1,197 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: GENI Serial Engine QUP Wrapper Controller
> +
> +maintainers:
> + - Mukesh Savaliya <msavaliy@xxxxxxxxxxxxxx>
> + - Akash Asthana <akashast@xxxxxxxxxxxxxx>
> +
> +description: |
> + Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) wrapper
> + is a programmable module for supporting a wide range of serial interfaces
> + like UART, SPI, I2C, I3C, etc. A single QUP module can provide upto 8 Serial
> + Interfaces, using its internal Serial Engines. The GENI Serial Engine QUP
> + Wrapper controller is modeled as a node with zero or more child nodes each
> + representing a serial engine.
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,geni-se-qup
> +
> + reg:
> + description: QUP wrapper common register address and length.
> +
> + clock-names:
> + items:
> + - const: m-ahb
> + - const: s-ahb
> +
> + clocks:
> + minItems: 2
> + maxItems: 2
> + items:
> + - description: Master AHB Clock
> + - description: Slave AHB Clock
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 2
> +
> + ranges: true
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - "#address-cells"
> + - "#size-cells"
> + - ranges
> +
> +patternProperties:
> + "[i2c|spi]@[0-9]+$":

You'll need to split this so you can a add $ref to SPI and I2C
controller schemas.

For example:

allOf:
- $ref: /spi/spi-controller.yaml#

Though you could have 1 pattern that matches everything common and then
ones for I2C, SPI, etc.

> + type: object
> + description: GENI Serial Engine based I2C and SPI Controller.
> + SPI in master mode supports up to 50MHz, up to four chip
> + selects, programmable data path from 4 bits to 32 bits and
> + numerous protocol variants.
> +
> + properties:
> + compatible:
> + enum:
> + - qcom,geni-i2c
> + - qcom,geni-spi
> +
> + reg:
> + description: GENI Serial Engine register address and length.

Number of reg entries? Needs a 'maxItems: 1' or a list of the entries.

> +
> + interrupts:
> + maxItems: 1
> +
> + clock-names:
> + const: se
> +
> + clocks:
> + description: Serial engine core clock needed by the device.
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + clock-frequency:
> + description: Desired I2C bus clock frequency in Hz.
> + default: 100000
> +
> + required:
> + - compatible
> + - reg
> + - interrupts
> + - clock-names
> + - clocks
> + - "#address-cells"
> + - "#size-cells"
> +
> + "serial@[0-9]+$":

unit-address is hex.

> + type: object
> + description: GENI Serial Engine based UART Controller.
> +
> + properties:
> + compatible:
> + enum:
> + - qcom,geni-uart
> + - qcom,geni-debug-uart
> +
> + reg:
> + description: GENI Serial Engine register address and length.

Number of reg entries?

> +
> + interrupts:
> + minItems: 1
> + maxItems: 2
> + items:
> + - description: UART core irq
> + - description: Wakeup irq (RX GPIO)
> +
> + clock-names:
> + const: se
> +
> + clocks:
> + description: Serial engine core clock needed by the device.
> + maxItems: 1
> +
> + required:
> + - compatible
> + - reg
> + - interrupts
> + - clock-names
> + - clocks
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-sdm845.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc: soc@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + qupv3_id_0: geniqup@8c0000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0 0x008c0000 0 0x6000>;
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";

Don't show status in examples.

Why is the example changed? I don't really want to review it again.

> +
> + i2c0: i2c@880000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00880000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c0_default>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi0: spi@880000 {

Overlapping addresses are a problem unless these are all enable only 1
at a time. The original example didn't have this issue.

> + compatible = "qcom,geni-spi";
> + reg = <0 0x00880000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_spi0_default>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + uart0: serial@880000 {
> + compatible = "qcom,geni-uart";
> + reg = <0 0x00880000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart0_default>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + status = "disabled";
> + };
> + };
> + };
> +
> +...
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,\na Linux Foundation Collaborative Project
>

Next message: Rob Herring: "Re: [PATCH] dt-bindings: display: Convert raydium,rm68200 panel to DT schema"
Previous message: John Hubbard: "Re: [PATCH v11 00/25] mm/gup: track dma-pinned pages: FOLL_PIN"
In reply to: Akash Asthana: "[PATCH V2] dt-bindings: geni-se: Convert QUP geni-se bindings to YAML"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]