Re: [PATCH 1/3] arm64: dts: sc7180: Add Venus video codec DT node

[dikshita]

Hi Stan,

Thanks for the review!
I will address all the comments in the next version.

On 2019-12-20 15:04, Stanimir Varbanov wrote:
> Hi Dikshita,
>
> Thanks for the patch.
>
> On 12/20/19 9:59 AM, Dikshita Agarwal wrote:
> > This adds Venus video codec DT node for sc7180.
> >
> > Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi | 36 
> > ++++++++++++++++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi 
> > b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 6876aae2..42c70f5 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -10,6 +10,7 @@
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> >  #include <dt-bindings/phy/phy-qcom-qusb2.h>
> >  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> > +#include <dt-bindings/clock/qcom,videocc-sc7180.h>
> >
> >  / {
> >  	interrupt-parent = <&intc>;
> > @@ -66,6 +67,11 @@
> >  			compatible = "qcom,cmd-db";
> >  			no-map;
> >  		};
> > +
> > +		venus_mem: memory@8F600000 {
> > +			reg = <0 0x8F600000 0 0x500000>;
>
> Please use lower-case for hex numbers.
>
> > +			no-map;
> > +		};
> >  	};
> >
> >  	cpus {
> > @@ -1042,6 +1048,36 @@
> >  			};
> >  		};
> >
> > +		venus: video-codec@aa00000 {
> > +			compatible = "qcom,sc7180-venus";
> > +			reg = <0 0x0aa00000 0 0xff000>;
> > +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> > +			power-domains = <&videocc VENUS_GDSC>,
> > +					<&videocc VCODEC0_GDSC>;
> > +			power-domain-names = "venus", "vcodec0";
> > +			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> > +				<&videocc VIDEO_CC_VENUS_AHB_CLK>,
> > +				<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> > +				<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
> > +				<&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
>
> could you align those entries to the first one (you can use tabs and
> after that spaces to align)
>
> > +			clock-names = "core", "iface", "bus",
> > +					"vcodec0_core", "vcodec0_bus";
> > +			iommus = <&apps_smmu 0x0C00 0x60>;
>
> lower-case please
>
> > +			memory-region = <&venus_mem>;
> > +
> > +			video-core0 {
> > +					compatible = "venus-decoder";
>
> something is wrong with the indentation?
>
> Please run checkpatch with --strict
>
> > +			};
> > +
> > +			video-core1 {
> > +					compatible = "venus-encoder";
> > +			};
> > +
> > +			video-firmware {
> > +					iommus = <&apps_smmu 0x0C42 0x0>;
>
> lower-case
>
> > +			};
>
> This subnode should be in sc7180-idp.dts, because we assume that by
> default the qcom platforms have TZ.
>
> > +		};
> > +
> >  		pdc: interrupt-controller@b220000 {
> >  			compatible = "qcom,sc7180-pdc", "qcom,pdc";
> >  			reg = <0 0x0b220000 0 0x30000>;