Re: [PATCH v3 2/4] ARM: dts: imx: Add GW5910 board support

[Fabio Estevam]

On Mon, Dec 23, 2019 at 6:44 PM Robert Jones <rjones@xxxxxxxxxxxxx> wrote:
>
> From: Tim Harvey <tharvey@xxxxxxxxxxxxx>
>
> The Gateworks GW5910 is an IMX6 SoC based single board computer with:
>  - IMX6Q or IMX6DL
>  - 32bit DDR3 DRAM
>  - FEC GbE RJ45 front-panel
>  - 1x miniPCIe socket with PCI Gen2, USB2
>  - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
>  - 5V to 60V DC input barrel jack
>  - 3axis accelerometer (lis2de12)
>  - GPS (ublox ZOE-M8Q)
>  - bi-color front-panel LED
>  - 256MB NAND boot device
>  - microSD socket (with UHS-I support)
>  - user pushbutton
>  - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
>  - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
>  - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
>  - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
>  - off-board SPI connector (1x chip-select)
>
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>

Ok, this one has Tim as the author, but since you are submitting it,
you should also add your Signed-off-by below Tim's.