Re: [PATCH] powerpc/mpc85xx: also write addr_h to spin table for 64bit boot entry

[Yingjie Bai]

Hi Michael,
Thanks for pointing out the issue. My mistake...
This patch should indeed make sense only when
CONFIG_PHYS_64BIT=y

I could not find corenet32_smp_defconfig, but I guess in your config,
CONFIG_PHYS_64BIT=n ?
I will update the patch later today

On Sun, Dec 22, 2019 at 5:38 PM Michael Ellerman <mpe@xxxxxxxxxxxxxx> wrote:
>
> yingjie_bai@xxxxxxx writes:
> > From: Bai Yingjie <byj.tea@xxxxxxxxx>
> >
> > CPU like P4080 has 36bit physical address, its DDR physical
> > start address can be configured above 4G by LAW registers.
> >
> > For such systems in which their physical memory start address was
> > configured higher than 4G, we need also to write addr_h into the spin
> > table of the target secondary CPU, so that addr_h and addr_l together
> > represent a 64bit physical address.
> > Otherwise the secondary core can not get correct entry to start from.
> >
> > This should do no harm for normal case where addr_h is all 0.
> >
> > Signed-off-by: Bai Yingjie <byj.tea@xxxxxxxxx>
> > ---
> >  arch/powerpc/platforms/85xx/smp.c | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
> > index 8c7ea2486bc0..f12cdd1e80ff 100644
> > --- a/arch/powerpc/platforms/85xx/smp.c
> > +++ b/arch/powerpc/platforms/85xx/smp.c
> > @@ -252,6 +252,14 @@ static int smp_85xx_start_cpu(int cpu)
> >       out_be64((u64 *)(&spin_table->addr_h),
> >               __pa(ppc_function_entry(generic_secondary_smp_init)));
> >  #else
> > +     /*
> > +      * We need also to write addr_h to spin table for systems
> > +      * in which their physical memory start address was configured
> > +      * to above 4G, otherwise the secondary core can not get
> > +      * correct entry to start from.
> > +      * This does no harm for normal case where addr_h is all 0.
> > +      */
> > +     out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
> >       out_be32(&spin_table->addr_l, __pa(__early_start));
>
> This breaks the corenet32_smp_defconfig build:
>
>   /linux/arch/powerpc/platforms/85xx/smp.c: In function 'smp_85xx_start_cpu':
>   /linux/arch/powerpc/platforms/85xx/smp.c:262:52: error: right shift count >= width of type [-Werror=shift-count-overflow]
>     262 |  out_be32(&spin_table->addr_h, __pa(__early_start) >> 32);
>         |                                                    ^~
>   cc1: all warnings being treated as errors
>
> cheers