[PATCH 0/3] Meson8b/8m2: Ethernet RGMII TX delay fixes

[Martin Blumenstingl]

The Ethernet TX performance has been historically bad on Meson8b and
Meson8m2 SoCs because high packet loss was seen. Today I (presumably)
found out why this is: the input clock (which feeds the RGMII TX clock)
has to be at least 4 times 125MHz. With the fixed "divide by 2" in the
clock tree this means that m250_div needs to be at least 2.

Now the PRG_ETH0 register in Linux matches what u-boot and the vendor
3.10 kernel use. iperf3 output on my Odroid-C1 (where this series has
been tested):
# iperf3 -c 192.168.1.100
Connecting to host 192.168.1.100, port 5201
[  5] local 192.168.1.163 port 42636 connected to 192.168.1.100 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.00   sec   105 MBytes   878 Mbits/sec    0    609 KBytes       
[  5]   1.00-2.00   sec   106 MBytes   885 Mbits/sec    0    683 KBytes       
[  5]   2.00-3.09   sec  73.7 MBytes   570 Mbits/sec    0    683 KBytes       
[  5]   3.09-4.00   sec  81.9 MBytes   754 Mbits/sec    0    795 KBytes       
[  5]   4.00-5.00   sec   104 MBytes   869 Mbits/sec    0    877 KBytes       
[  5]   5.00-6.00   sec   105 MBytes   878 Mbits/sec    0    877 KBytes       
[  5]   6.00-7.00   sec  68.0 MBytes   571 Mbits/sec    0    877 KBytes       
[  5]   7.00-8.00   sec  80.7 MBytes   676 Mbits/sec    0    877 KBytes       
[  5]   8.00-9.01   sec   102 MBytes   853 Mbits/sec    0    877 KBytes       
[  5]   9.01-10.00  sec   101 MBytes   859 Mbits/sec    0    877 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   927 MBytes   778 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   927 MBytes   777 Mbits/sec                  receiver


@David: please only apply patch #1 from this series. I included the .dts
changes so others can test them together with the driver update (as the
.dts has to be updated to fully fix the TX packet loss - with the old TX
delay in the .dts there is still packet loss, even with a fixed driver).

I will ask Kevin to apply patches #2 and #3 through his linux-amlogic
tree - or resend them. When applying the .dts patches without the fix in
the driver then I get 100% packet loss on my Odroid-C1. So unfortunately
there's a hard dependency between patch 1 and 2/3.


Martin Blumenstingl (3):
  net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs
  ARM: dts: meson8b: odroidc1: use the same RGMII TX delay as u-boot
  ARM: dts: meson8m2: mxiii-plus: use the same RGMII TX delay as u-boot

 arch/arm/boot/dts/meson8b-odroidc1.dts             |  2 +-
 arch/arm/boot/dts/meson8m2-mxiii-plus.dts          |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c    | 14 +++++++++++---
 3 files changed, 13 insertions(+), 5 deletions(-)

-- 
2.24.1