Re: [PATCH 4/5] spi: uniphier: Add SPI_LOOP to the capabilities

From: Kunihiko Hayashi
Date: Wed Dec 25 2019 - 20:55:42 EST


Hi Mark,
Thanks for your comment.

On Wed, 25 Dec 2019 18:01:42 +0000 <broonie@xxxxxxxxxx> wrote:
> On Tue, Dec 24, 2019 at 09:58:26AM +0900, Kunihiko Hayashi wrote:
> > Add SPI_LOOP to the capabilities to support loopback mode.
>
> > master->min_speed_hz = DIV_ROUND_UP(clk_rate, SSI_MAX_CLK_DIVIDER);
> > - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
> > + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST |
> > + SPI_LOOP;
>
> I'd expect to see a matching change that configures the hardware
> in loopback mode when the driver is in SPI_MODE? There's nothing
> in the existing driver.

I see. When doing loopback test using spi-loopback-test.c, I thought
'loop_req=1' option was needed, however, the controller doesn't need it.
We can ignore this patch.

Thank you,

---
Best Regards,
Kunihiko Hayashi