[RFC v1 1/2] net: stmmac: dwmac-meson8b: use FIELD_PREP instead of open-coding it
From: Martin Blumenstingl
Date: Thu Dec 26 2019 - 15:37:19 EST
Use FIELD_PREP() to shift a value to the correct offset based on a
bitmask instead of open-coding the logic.
No functional changes.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 0e2fa14f1423..1483761ab1e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -5,6 +5,7 @@
* Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/device.h>
@@ -32,7 +33,6 @@
#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
-#define PRG_ETH0_TXDLY_SHIFT 5
#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
/* divider for the result of m250_sel */
@@ -261,7 +261,8 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
PRG_ETH0_INVERTED_RMII_CLK, 0);
meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
- tx_dly_val << PRG_ETH0_TXDLY_SHIFT);
+ FIELD_PREP(PRG_ETH0_TXDLY_MASK,
+ tx_dly_val));
/* Configure the 125MHz RGMII TX clock, the IP block changes
* the output automatically (= without us having to configure
--
2.24.1