Re: [PATCH] drm/bridge: Fix Exynos DSI after making bridge chain a double-linked list

[Boris Brezillon]

On Fri, 27 Dec 2019 13:00:04 +0100
Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx> wrote:

> On Fri, 27 Dec 2019 12:01:35 +0100
> Marek Szyprowski <m.szyprowski@xxxxxxxxxxx> wrote:
> 
> > Exynos DSI DRM driver uses private calls to out bridge to force certain
> > order of operations during init/exit sequences. This no longer works after
> > conversion of bridge chain to a double-linked list. To fix the regression
> > call bridge related operations manually instead of the generic
> > drm_bridge_chain_*() operations.  
> 
> I think it'd be worth explaining what the problem is (infinite loop
> caused by list_for_each_entry() use when the bridge is no longer part
> of the chain attached to the encoder).
> 
> > 
> > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list")  
> 
> We also need to fix that in VC4.
> 
> > ---
> > This patch is a result of the following discussion:
> > https://www.spinics.net/lists/dri-devel/msg239256.html
> > ---
> >  drivers/gpu/drm/exynos/exynos_drm_dsi.c | 21 ++++++++++++---------
> >  1 file changed, 12 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > index 3955f84dc893..f5905c239a86 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > @@ -255,7 +255,6 @@ struct exynos_dsi {
> >  	struct mipi_dsi_host dsi_host;
> >  	struct drm_connector connector;
> >  	struct drm_panel *panel;
> > -	struct list_head bridge_chain;
> >  	struct drm_bridge *out_bridge;
> >  	struct device *dev;
> >  
> > @@ -1391,7 +1390,8 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
> >  		if (ret < 0)
> >  			goto err_put_sync;
> >  	} else {
> > -		drm_bridge_chain_pre_enable(dsi->out_bridge);
> > +		if (dsi->out_bridge->funcs->pre_enable)
> > +			dsi->out_bridge->funcs->pre_enable(dsi->out_bridge);  
> 
> Okay, so you're calling ->{pre_enable,enable,disable,post_disable}() on
> the first bridge element which only works if the chain contains one
> bridge (see below). Maybe you should keep exynos_dsi.bridge_chain and
> create custom helpers to iterate over chain elements instead of calling
> those hooks only on out_bridge.

The following diff should fix the problem while keeping the solution
generic enough to support chains containing more than one bridge.

--->8---
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 3955f84dc893..c861b640fc59 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1378,6 +1378,7 @@ static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
 static void exynos_dsi_enable(struct drm_encoder *encoder)
 {
        struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+       struct drm_bridge *iter;
        int ret;
 
        if (dsi->state & DSIM_STATE_ENABLED)
@@ -1391,7 +1392,11 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
                if (ret < 0)
                        goto err_put_sync;
        } else {
-               drm_bridge_chain_pre_enable(dsi->out_bridge);
+               list_for_each_entry_reverse(iter, &encoder->bridge_chain,
+                                           chain_node) {
+                       if (iter->funcs->pre_enable)
+                               iter->funcs->pre_enable(iter);
+               }
        }
 
        exynos_dsi_set_display_mode(dsi);
@@ -1402,7 +1407,10 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
                if (ret < 0)
                        goto err_display_disable;
        } else {
-               drm_bridge_chain_enable(dsi->out_bridge);
+               list_for_each_entry(iter, &encoder->bridge_chain, chain_node) {
+                       if (iter->funcs->enable)
+                               iter->funcs->enable(iter);
+               }
        }
 
        dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
@@ -1420,6 +1428,7 @@ static void exynos_dsi_enable(struct drm_encoder *encoder)
 static void exynos_dsi_disable(struct drm_encoder *encoder)
 {
        struct exynos_dsi *dsi = encoder_to_dsi(encoder);
+       struct drm_bridge *iter;
 
        if (!(dsi->state & DSIM_STATE_ENABLED))
                return;
@@ -1427,10 +1436,20 @@ static void exynos_dsi_disable(struct drm_encoder *encoder)
        dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
 
        drm_panel_disable(dsi->panel);
-       drm_bridge_chain_disable(dsi->out_bridge);
+
+       list_for_each_entry_reverse(iter, &encoder->bridge_chain, chain_node) {
+               if (iter->funcs->disable)
+                       iter->funcs->disable(iter);
+       }
+
        exynos_dsi_set_display_enable(dsi, false);
        drm_panel_unprepare(dsi->panel);
-       drm_bridge_chain_post_disable(dsi->out_bridge);
+
+       list_for_each_entry(iter, &encoder->bridge_chain, chain_node) {
+               if (iter->funcs->post_disable)
+                       iter->funcs->post_disable(iter);
+       }
+
        dsi->state &= ~DSIM_STATE_ENABLED;
        pm_runtime_put_sync(dsi->dev);
 }
@@ -1523,7 +1542,7 @@ static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
        if (out_bridge) {
                drm_bridge_attach(encoder, out_bridge, NULL);
                dsi->out_bridge = out_bridge;
-               list_splice(&encoder->bridge_chain, &dsi->bridge_chain);
+               list_splice_init(&encoder->bridge_chain, &dsi->bridge_chain);
        } else {
                int ret = exynos_dsi_create_connector(encoder);