[PATCH v2 1/3] dmaengine: ptdma: Initial driver for the AMD PassThru DMA engine
From: Sanjay R Mehta
Date: Fri Dec 27 2019 - 09:48:05 EST
From: Sanjay R Mehta <sanju.mehta@xxxxxxx>
This device performs high-bandwidth memory-to-memory
transfer operations.
Device commands are managed via a circular queue of
'descriptors', each of which specifies source and
destination addresses for copying a single buffer of data.
The driver must handle multiple devices, which are logged
on a linked list; all devices are treated equivalently.
Signed-off-by: Sanjay R Mehta <sanju.mehta@xxxxxxx>
Signed-off-by: Gary R Hook <gary.hook@xxxxxxx>
---
MAINTAINERS | 6 +
drivers/dma/Kconfig | 2 +
drivers/dma/Makefile | 1 +
drivers/dma/ptdma/Kconfig | 6 +
drivers/dma/ptdma/Makefile | 10 ++
drivers/dma/ptdma/ptdma-dev.c | 387 ++++++++++++++++++++++++++++++++++++++++++
drivers/dma/ptdma/ptdma-pci.c | 269 +++++++++++++++++++++++++++++
drivers/dma/ptdma/ptdma.h | 321 +++++++++++++++++++++++++++++++++++
8 files changed, 1002 insertions(+)
create mode 100644 drivers/dma/ptdma/Kconfig
create mode 100644 drivers/dma/ptdma/Makefile
create mode 100644 drivers/dma/ptdma/ptdma-dev.c
create mode 100644 drivers/dma/ptdma/ptdma-pci.c
create mode 100644 drivers/dma/ptdma/ptdma.h
diff --git a/MAINTAINERS b/MAINTAINERS
index bd5847e..42ef93c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -882,6 +882,12 @@ S: Supported
F: drivers/net/ethernet/amd/xgbe/
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
+AMD PTDMA DRIVER
+M: Sanjay R Mehta <sanju.mehta@xxxxxxx>
+L: dmaengine@xxxxxxxxxxxxxxx
+S: Maintained
+F: drivers/dma/ptdma/
+
ANALOG DEVICES INC AD5686 DRIVER
M: Stefan Popa <stefan.popa@xxxxxxxxxx>
L: linux-pm@xxxxxxxxxxxxxxx
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 6fa1eba..d9856cc 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -697,6 +697,8 @@ source "drivers/dma/ti/Kconfig"
source "drivers/dma/fsl-dpaa2-qdma/Kconfig"
+source "drivers/dma/ptdma/Kconfig"
+
# clients
comment "DMA Clients"
depends on DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 42d7e2f..a806824 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -79,6 +79,7 @@ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
obj-$(CONFIG_ZX_DMA) += zx_dma.o
obj-$(CONFIG_ST_FDMA) += st_fdma.o
obj-$(CONFIG_FSL_DPAA2_QDMA) += fsl-dpaa2-qdma/
+obj-$(CONFIG_AMD_PTDMA) += ptdma/
obj-y += mediatek/
obj-y += qcom/
diff --git a/drivers/dma/ptdma/Kconfig b/drivers/dma/ptdma/Kconfig
new file mode 100644
index 0000000..4ec259e
--- /dev/null
+++ b/drivers/dma/ptdma/Kconfig
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AMD_PTDMA
+ tristate "AMD PassThru DMA Engine"
+ depends on X86_64 && PCI
+ help
+ Provides the support for AMD PassThru DMA Engine.
diff --git a/drivers/dma/ptdma/Makefile b/drivers/dma/ptdma/Makefile
new file mode 100644
index 0000000..320fa82
--- /dev/null
+++ b/drivers/dma/ptdma/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# AMD Passthru DMA driver
+#
+
+obj-$(CONFIG_AMD_PTDMA) += ptdma.o
+
+ptdma-objs := ptdma-dev.o
+
+ptdma-$(CONFIG_PCI) += ptdma-pci.o
diff --git a/drivers/dma/ptdma/ptdma-dev.c b/drivers/dma/ptdma/ptdma-dev.c
new file mode 100644
index 0000000..7c8ddcb
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-dev.c
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2019 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@xxxxxxx>
+ * Author: Gary R Hook <gary.hook@xxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+
+#include "ptdma.h"
+
+static int cmd_queue_length = 32;
+module_param(cmd_queue_length, uint, 0644);
+MODULE_PARM_DESC(cmd_queue_length,
+ " length of the command queue, a power of 2 (2 <= val <= 128)");
+
+/*
+ * List of PTDMAs, PTDMA count, read-write access lock, and access functions
+ *
+ * Lock structure: get pt_unit_lock for reading whenever we need to
+ * examine the PTDMA list. While holding it for reading we can acquire
+ * the RR lock to update the round-robin next-PTDMA pointer. The unit lock
+ * must be acquired before the RR lock.
+ *
+ * If the unit-lock is acquired for writing, we have total control over
+ * the list, so there's no value in getting the RR lock.
+ */
+static DEFINE_RWLOCK(pt_unit_lock);
+static LIST_HEAD(pt_units);
+
+static struct pt_device *pt_rr;
+
+/* Human-readable error strings */
+static char *pt_error_codes[] = {
+ "",
+ "ERR 01: ILLEGAL_ENGINE",
+ "ERR 03: ILLEGAL_FUNCTION_TYPE",
+ "ERR 04: ILLEGAL_FUNCTION_MODE",
+ "ERR 06: ILLEGAL_FUNCTION_SIZE",
+ "ERR 08: ILLEGAL_FUNCTION_RSVD",
+ "ERR 09: ILLEGAL_BUFFER_LENGTH",
+ "ERR 10: VLSB_FAULT",
+ "ERR 11: ILLEGAL_MEM_ADDR",
+ "ERR 12: ILLEGAL_MEM_SEL",
+ "ERR 13: ILLEGAL_CONTEXT_ID",
+ "ERR 15: 0xF Reserved",
+ "ERR 18: CMD_TIMEOUT",
+ "ERR 19: IDMA0_AXI_SLVERR",
+ "ERR 20: IDMA0_AXI_DECERR",
+ "ERR 21: 0x15 Reserved",
+ "ERR 22: IDMA1_AXI_SLAVE_FAULT",
+ "ERR 23: IDMA1_AIXI_DECERR",
+ "ERR 24: 0x18 Reserved",
+ "ERR 27: 0x1B Reserved",
+ "ERR 38: ODMA0_AXI_SLVERR",
+ "ERR 39: ODMA0_AXI_DECERR",
+ "ERR 40: 0x28 Reserved",
+ "ERR 41: ODMA1_AXI_SLVERR",
+ "ERR 42: ODMA1_AXI_DECERR",
+ "ERR 43: LSB_PARITY_ERR",
+};
+
+static void pt_log_error(struct pt_device *d, int e)
+{
+ dev_err(d->dev, "PTDMA error: %s (0x%x)\n", pt_error_codes[e], e);
+}
+
+/*
+ * pt_add_device - add a PTDMA device to the list
+ *
+ * @pt: pt_device struct pointer
+ *
+ * Put this PTDMA on the unit list, which makes it available
+ * for use.
+ *
+ * Returns zero if a PTDMA device is present, -ENODEV otherwise.
+ */
+static void pt_add_device(struct pt_device *pt)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&pt_unit_lock, flags);
+ list_add_tail(&pt->entry, &pt_units);
+ if (!pt_rr)
+ /*
+ * We already have the list lock (we're first) so this
+ * pointer can't change on us. Set its initial value.
+ */
+ pt_rr = pt;
+ write_unlock_irqrestore(&pt_unit_lock, flags);
+}
+
+/*
+ * pt_del_device - remove a PTDMA device from the list
+ *
+ * @pt: pt_device struct pointer
+ *
+ * Remove this unit from the list of devices. If the next device
+ * up for use is this one, adjust the pointer. If this is the last
+ * device, NULL the pointer.
+ */
+static void pt_del_device(struct pt_device *pt)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&pt_unit_lock, flags);
+ if (pt_rr == pt) {
+ /*
+ * pt_unit_lock is read/write; any read access
+ * will be suspended while we make changes to the
+ * list and RR pointer.
+ */
+ if (list_is_last(&pt_rr->entry, &pt_units))
+ pt_rr = list_first_entry(&pt_units, struct pt_device,
+ entry);
+ else
+ pt_rr = list_next_entry(pt_rr, entry);
+ }
+ list_del(&pt->entry);
+ if (list_empty(&pt_units))
+ pt_rr = NULL;
+ write_unlock_irqrestore(&pt_unit_lock, flags);
+}
+
+static int pt_core_execute_cmd(struct ptdma_desc *desc,
+ struct pt_cmd_queue *cmd_q)
+{
+ u32 *mp;
+ __le32 *dp;
+ u32 tail;
+ int i;
+ int ret = 0;
+
+ if (desc->dw0.soc) {
+ desc->dw0.ioc = 1;
+ desc->dw0.soc = 0;
+ }
+ mutex_lock(&cmd_q->q_mutex);
+
+ mp = (u32 *)&cmd_q->qbase[cmd_q->qidx];
+ dp = (__le32 *)desc;
+ for (i = 0; i < 8; i++)
+ mp[i] = cpu_to_le32(dp[i]); /* handle endianness */
+
+ cmd_q->qidx = (cmd_q->qidx + 1) % cmd_queue_length;
+
+ /* The data used by this command must be flushed to memory */
+ wmb();
+
+ /* Write the new tail address back to the queue register */
+ tail = lower_32_bits(cmd_q->qdma_tail + cmd_q->qidx * Q_DESC_SIZE);
+ iowrite32(tail, cmd_q->reg_tail_lo);
+
+ /* Turn the queue back on using our cached control register */
+ iowrite32(cmd_q->qcontrol | CMD_Q_RUN, cmd_q->reg_control);
+ mutex_unlock(&cmd_q->q_mutex);
+
+ return ret;
+}
+
+int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
+ struct pt_passthru_engine *pt_engine)
+{
+ struct ptdma_desc desc;
+
+ cmd_q->cmd_error = 0;
+
+ memset(&desc, 0, Q_DESC_SIZE);
+
+ desc.dw0.val = CMD_DESC_DW0_VAL;
+
+ desc.length = pt_engine->src_len;
+
+ desc.src_lo = lower_32_bits(pt_engine->src_dma);
+ desc.dw3.src_hi = upper_32_bits(pt_engine->src_dma);
+
+ desc.dst_lo = lower_32_bits(pt_engine->dst_dma);
+ desc.dw5.dst_hi = upper_32_bits(pt_engine->dst_dma);
+
+ return pt_core_execute_cmd(&desc, cmd_q);
+}
+
+static void pt_core_disable_queue_interrupts(struct pt_device *pt)
+{
+ iowrite32(0x0, pt->cmd_q.reg_int_enable);
+}
+
+static void pt_core_enable_queue_interrupts(struct pt_device *pt)
+{
+ iowrite32(SUPPORTED_INTERRUPTS, pt->cmd_q.reg_int_enable);
+}
+
+static irqreturn_t pt_core_irq_handler(int irq, void *data)
+{
+ struct pt_device *pt = (struct pt_device *)data;
+ struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+ u32 status;
+
+ pt_core_disable_queue_interrupts(pt);
+
+ status = ioread32(cmd_q->reg_interrupt_status);
+ if (status) {
+ cmd_q->int_status = status;
+ cmd_q->q_status = ioread32(cmd_q->reg_status);
+ cmd_q->q_int_status = ioread32(cmd_q->reg_int_status);
+
+ /* On error, only save the first error value */
+ if ((status & INT_ERROR) && !cmd_q->cmd_error)
+ cmd_q->cmd_error = CMD_Q_ERROR(cmd_q->q_status);
+
+ /* Acknowledge the interrupt */
+ iowrite32(status, cmd_q->reg_interrupt_status);
+ }
+
+ pt_core_enable_queue_interrupts(pt);
+
+ return IRQ_HANDLED;
+}
+
+static void pt_init_cmdq_regs(struct pt_cmd_queue *cmd_q)
+{
+ void __iomem *io_regs = cmd_q->reg_control;
+
+ cmd_q->reg_tail_lo = io_regs + CMD_Q_TAIL_LO_BASE;
+ cmd_q->reg_head_lo = io_regs + CMD_Q_HEAD_LO_BASE;
+ cmd_q->reg_status = io_regs + CMD_Q_STATUS_BASE;
+ cmd_q->reg_int_enable = io_regs + CMD_Q_INT_ENABLE_BASE;
+ cmd_q->reg_int_status = io_regs + CMD_Q_INT_STATUS_BASE;
+ cmd_q->reg_dma_status = io_regs + CMD_Q_DMA_STATUS_BASE;
+ cmd_q->reg_dma_read_status = io_regs + CMD_Q_DMA_READ_STATUS_BASE;
+ cmd_q->reg_dma_write_status = io_regs + CMD_Q_DMA_WRITE_STATUS_BASE;
+ cmd_q->reg_interrupt_status = io_regs + CMD_Q_INTERRUPT_STATUS_BASE;
+}
+
+int pt_core_init(struct pt_device *pt)
+{
+ struct device *dev = pt->dev;
+ struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+ struct dma_pool *dma_pool;
+ char dma_pool_name[MAX_DMAPOOL_NAME_LEN];
+ int ret;
+ u32 dma_addr_lo, dma_addr_hi;
+
+ /* Allocate a dma pool for the queue */
+ snprintf(dma_pool_name, sizeof(dma_pool_name), "%s_q", pt->name);
+
+ dma_pool = dma_pool_create(dma_pool_name, dev,
+ PT_DMAPOOL_MAX_SIZE,
+ PT_DMAPOOL_ALIGN, 0);
+ if (!dma_pool) {
+ dev_err(dev, "unable to allocate dma pool\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ /* ptdma core initialisation */
+ iowrite32(CMD_CONFIG_VHB_EN, pt->io_regs + CMD_CONFIG_OFFSET);
+ iowrite32(CMD_QUEUE_PRIO, pt->io_regs + CMD_QUEUE_PRIO_OFFSET);
+ iowrite32(CMD_TIMEOUT_DISABLE, pt->io_regs + CMD_TIMEOUT_OFFSET);
+ iowrite32(CMD_CLK_GATE_CONFIG, pt->io_regs + CMD_CLK_GATE_CTL_OFFSET);
+ iowrite32(CMD_CONFIG_REQID, pt->io_regs + CMD_REQID_CONFIG_OFFSET);
+
+ cmd_q->pt = pt;
+ cmd_q->dma_pool = dma_pool;
+ mutex_init(&cmd_q->q_mutex);
+
+ /* Set the length module parameter */
+ if ((cmd_queue_length & (cmd_queue_length - 1)) ||
+ cmd_queue_length < 2 || cmd_queue_length > 128) {
+ dev_err(dev, "invalid command queue length\n");
+ ret = -EINVAL;
+ }
+ dev_notice(dev, "Setting queue size to %d commands\n",
+ cmd_queue_length);
+
+ /* Page alignment satisfies our needs for N <= 128 */
+ cmd_q->qsize = Q_SIZE(Q_DESC_SIZE);
+ cmd_q->qbase = dma_alloc_coherent(dev, cmd_q->qsize,
+ &cmd_q->qbase_dma,
+ GFP_KERNEL);
+ if (!cmd_q->qbase) {
+ dev_err(dev, "unable to allocate command queue\n");
+ ret = -ENOMEM;
+ goto e_dma_alloc;
+ }
+
+ cmd_q->qidx = 0;
+
+ /* Preset some register values */
+ cmd_q->reg_control = pt->io_regs + CMD_Q_STATUS_INCR;
+ pt_init_cmdq_regs(cmd_q);
+
+ dev_dbg(dev, "queue available\n");
+
+ /* Turn off the queues and disable interrupts until ready */
+ pt_core_disable_queue_interrupts(pt);
+
+ cmd_q->qcontrol = 0; /* Start with nothing */
+ iowrite32(cmd_q->qcontrol, cmd_q->reg_control);
+
+ ioread32(cmd_q->reg_int_status);
+ ioread32(cmd_q->reg_status);
+
+ /* Clear the interrupt status */
+ iowrite32(SUPPORTED_INTERRUPTS, cmd_q->reg_interrupt_status);
+
+ /* Request an irq */
+ ret = request_irq(pt->pt_irq, pt_core_irq_handler, 0, pt->name, pt);
+ if (ret) {
+ dev_err(dev, "unable to allocate an IRQ\n");
+ goto e_pool;
+ }
+
+ /* Update the device registers with queue information. */
+
+ cmd_q->qcontrol &= ~(CMD_Q_SIZE << CMD_Q_SHIFT);
+ cmd_q->qcontrol |= QUEUE_SIZE_VAL << CMD_Q_SHIFT;
+
+ cmd_q->qdma_tail = cmd_q->qbase_dma;
+ dma_addr_lo = lower_32_bits(cmd_q->qdma_tail);
+ iowrite32((u32)dma_addr_lo, cmd_q->reg_tail_lo);
+ iowrite32((u32)dma_addr_lo, cmd_q->reg_head_lo);
+
+ dma_addr_hi = upper_32_bits(cmd_q->qdma_tail);
+ cmd_q->qcontrol |= (dma_addr_hi << 16);
+ iowrite32(cmd_q->qcontrol, cmd_q->reg_control);
+
+ dev_dbg(dev, "Enabling interrupts...\n");
+ pt_core_enable_queue_interrupts(pt);
+
+ /* Put this on the unit list to make it available */
+ pt_add_device(pt);
+
+ dev_dbg(dev, "PTDMA device %s registration successful...\n", pt->name);
+
+ return 0;
+
+e_dma_alloc:
+ dma_free_coherent(dev, cmd_q->qsize, cmd_q->qbase, cmd_q->qbase_dma);
+
+e_pool:
+ dma_pool_destroy(pt->cmd_q.dma_pool);
+
+ return ret;
+}
+
+void pt_core_destroy(struct pt_device *pt)
+{
+ struct device *dev = pt->dev;
+ struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+ struct pt_cmd *cmd;
+
+ /* Remove this device from the list of available units first */
+ pt_del_device(pt);
+
+ /* Disable and clear interrupts */
+ pt_core_disable_queue_interrupts(pt);
+
+ /* Turn off the run bit */
+ iowrite32(cmd_q->qcontrol & ~CMD_Q_RUN, cmd_q->reg_control);
+
+ /* Clear the interrupt status */
+ iowrite32(SUPPORTED_INTERRUPTS, cmd_q->reg_interrupt_status);
+ ioread32(cmd_q->reg_int_status);
+ ioread32(cmd_q->reg_status);
+
+ free_irq(pt->pt_irq, pt);
+
+ dma_free_coherent(dev, cmd_q->qsize, cmd_q->qbase,
+ cmd_q->qbase_dma);
+
+ /* Flush the cmd queue */
+ while (!list_empty(&pt->cmd)) {
+ /* Invoke the callback directly with an error code */
+ cmd = list_first_entry(&pt->cmd, struct pt_cmd, entry);
+ list_del(&cmd->entry);
+ cmd->pt_cmd_callback(cmd->data, -ENODEV);
+ }
+}
diff --git a/drivers/dma/ptdma/ptdma-pci.c b/drivers/dma/ptdma/ptdma-pci.c
new file mode 100644
index 0000000..8c8883d
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-pci.c
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2019 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@xxxxxxx>
+ * Author: Tom Lendacky <thomas.lendacky@xxxxxxx>
+ * Author: Gary R Hook <gary.hook@xxxxxxx>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/dma-mapping.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+
+#include "ptdma.h"
+
+/* Ever-increasing value to produce unique unit numbers */
+static atomic_t pt_ordinal;
+
+struct pt_msix {
+ int msix_count;
+ struct msix_entry msix_entry;
+};
+
+/*
+ * pt_alloc_struct - allocate and initialize the pt_device struct
+ *
+ * @dev: device struct of the PTDMA
+ */
+static struct pt_device *pt_alloc_struct(struct device *dev)
+{
+ struct pt_device *pt;
+
+ pt = devm_kzalloc(dev, sizeof(*pt), GFP_KERNEL);
+ if (!pt)
+ return NULL;
+ pt->dev = dev;
+ pt->ord = atomic_inc_return(&pt_ordinal);
+
+ INIT_LIST_HEAD(&pt->cmd);
+
+ snprintf(pt->name, MAX_PT_NAME_LEN, "pt-%u", pt->ord);
+
+ return pt;
+}
+
+static int pt_get_msix_irqs(struct pt_device *pt)
+{
+ struct pt_msix *pt_msix = pt->pt_msix;
+ struct device *dev = pt->dev;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ pt_msix->msix_entry.entry = 0;
+
+ ret = pci_enable_msix_range(pdev, &pt_msix->msix_entry, 1, 1);
+ if (ret < 0)
+ return ret;
+
+ pt_msix->msix_count = ret;
+
+ pt->pt_irq = pt_msix->msix_entry.vector;
+
+ return 0;
+}
+
+static int pt_get_msi_irq(struct pt_device *pt)
+{
+ struct device *dev = pt->dev;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int ret;
+
+ ret = pci_enable_msi(pdev);
+ if (ret)
+ return ret;
+
+ pt->pt_irq = pdev->irq;
+
+ return 0;
+}
+
+static int pt_get_irqs(struct pt_device *pt)
+{
+ struct device *dev = pt->dev;
+ int ret;
+
+ ret = pt_get_msix_irqs(pt);
+ if (!ret)
+ return 0;
+
+ /* Couldn't get MSI-X vectors, try MSI */
+ dev_notice(dev, "could not enable MSI-X (%d), trying MSI\n", ret);
+ ret = pt_get_msi_irq(pt);
+ if (!ret)
+ return 0;
+
+ /* Couldn't get MSI interrupt */
+ dev_notice(dev, "could not enable MSI (%d)\n", ret);
+
+ return ret;
+}
+
+static void pt_free_irqs(struct pt_device *pt)
+{
+ struct pt_msix *pt_msix = pt->pt_msix;
+ struct device *dev = pt->dev;
+ struct pci_dev *pdev = to_pci_dev(dev);
+
+ if (pt_msix->msix_count)
+ pci_disable_msix(pdev);
+ else if (pt->pt_irq)
+ pci_disable_msi(pdev);
+
+ pt->pt_irq = 0;
+}
+
+static int pt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct pt_device *pt;
+ struct pt_msix *pt_msix;
+ struct device *dev = &pdev->dev;
+ void __iomem * const *iomap_table;
+ int bar_mask;
+ int ret = -ENOMEM;
+
+ pt = pt_alloc_struct(dev);
+ if (!pt)
+ goto e_err;
+
+ pt_msix = devm_kzalloc(dev, sizeof(*pt_msix), GFP_KERNEL);
+ if (!pt_msix)
+ goto e_err;
+
+ pt->pt_msix = pt_msix;
+ pt->dev_vdata = (struct pt_dev_vdata *)id->driver_data;
+ if (!pt->dev_vdata) {
+ ret = -ENODEV;
+ dev_err(dev, "missing driver data\n");
+ goto e_err;
+ }
+
+ ret = pcim_enable_device(pdev);
+ if (ret) {
+ dev_err(dev, "pcim_enable_device failed (%d)\n", ret);
+ goto e_err;
+ }
+
+ bar_mask = pci_select_bars(pdev, IORESOURCE_MEM);
+ ret = pcim_iomap_regions(pdev, bar_mask, "ptdma");
+ if (ret) {
+ dev_err(dev, "pcim_iomap_regions failed (%d)\n", ret);
+ goto e_err;
+ }
+
+ iomap_table = pcim_iomap_table(pdev);
+ if (!iomap_table) {
+ dev_err(dev, "pcim_iomap_table failed\n");
+ ret = -ENOMEM;
+ goto e_err;
+ }
+
+ pt->io_regs = iomap_table[pt->dev_vdata->bar];
+ if (!pt->io_regs) {
+ dev_err(dev, "ioremap failed\n");
+ ret = -ENOMEM;
+ goto e_err;
+ }
+
+ ret = pt_get_irqs(pt);
+ if (ret)
+ goto e_err;
+
+ pci_set_master(pdev);
+
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+ if (ret) {
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n",
+ ret);
+ goto e_err;
+ }
+ }
+
+ dev_set_drvdata(dev, pt);
+
+ if (pt->dev_vdata)
+ ret = pt_core_init(pt);
+
+ if (ret) {
+ dev_notice(dev, "PTDMA initialization failed\n");
+ goto e_err;
+ }
+
+ dev_notice(dev, "PTDMA enabled\n");
+
+ return 0;
+
+e_err:
+ dev_notice(dev, "initialization failed\n");
+ return ret;
+}
+
+static void pt_pci_remove(struct pci_dev *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct pt_device *pt = dev_get_drvdata(dev);
+
+ if (!pt)
+ return;
+
+ if (pt->dev_vdata)
+ pt_core_destroy(pt);
+
+ pt_free_irqs(pt);
+}
+
+#ifdef CONFIG_PM
+static int pt_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ return -ENOSYS;
+}
+
+static int pt_pci_resume(struct pci_dev *pdev)
+{
+ return -ENOSYS;
+}
+#endif
+
+static const struct pt_dev_vdata dev_vdata[] = {
+ {
+ .bar = 2,
+ .version = PT_VERSION(5, 0),
+ },
+};
+
+static const struct pci_device_id pt_pci_table[] = {
+ { PCI_VDEVICE(AMD, 0x1498), (kernel_ulong_t)&dev_vdata[0] },
+ /* Last entry must be zero */
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, pt_pci_table);
+
+static struct pci_driver pt_pci_driver = {
+ .name = "ptdma",
+ .id_table = pt_pci_table,
+ .probe = pt_pci_probe,
+ .remove = pt_pci_remove,
+#ifdef CONFIG_PM
+ .suspend = pt_pci_suspend,
+ .resume = pt_pci_resume,
+#endif
+};
+
+module_pci_driver(pt_pci_driver);
+
+MODULE_AUTHOR("Sanjay R Mehta <sanju.mehta@xxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AMD PassThru DMA driver");
diff --git a/drivers/dma/ptdma/ptdma.h b/drivers/dma/ptdma/ptdma.h
new file mode 100644
index 0000000..0cabbf3
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma.h
@@ -0,0 +1,321 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2019 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@xxxxxxx>
+ * Author: Tom Lendacky <thomas.lendacky@xxxxxxx>
+ * Author: Gary R Hook <gary.hook@xxxxxxx>
+ */
+
+#ifndef __PT_DEV_H__
+#define __PT_DEV_H__
+
+#include <linux/device.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/dmapool.h>
+
+#define MAX_PT_NAME_LEN 16
+#define MAX_DMAPOOL_NAME_LEN 32
+
+#define MAX_HW_QUEUES 1
+#define MAX_CMD_QLEN 100
+
+#define PT_ENGINE_PASSTHRU 5
+#define PT_OFFSET 0x0
+
+#define PT_VSIZE 16
+#define PT_VMASK ((unsigned int)((1 << PT_VSIZE) - 1))
+#define PT_VERSION(v, r) ((unsigned int)(((v) << PT_VSIZE) \
+ | ((r) & PT_VMASK)))
+
+/* Register Mappings */
+#define IRQ_MASK_REG 0x040
+#define IRQ_STATUS_REG 0x200
+
+#define CMD_Q_ERROR(__qs) ((__qs) & 0x0000003f)
+
+#define CMD_QUEUE_PRIO_OFFSET 0x00
+#define CMD_REQID_CONFIG_OFFSET 0x04
+#define CMD_TIMEOUT_OFFSET 0x08
+
+#define CMD_Q_CONTROL_BASE 0x0000
+#define CMD_Q_TAIL_LO_BASE 0x0004
+#define CMD_Q_HEAD_LO_BASE 0x0008
+#define CMD_Q_INT_ENABLE_BASE 0x000C
+#define CMD_Q_INTERRUPT_STATUS_BASE 0x0010
+
+#define CMD_Q_STATUS_BASE 0x0100
+#define CMD_Q_INT_STATUS_BASE 0x0104
+#define CMD_Q_DMA_STATUS_BASE 0x0108
+#define CMD_Q_DMA_READ_STATUS_BASE 0x010C
+#define CMD_Q_DMA_WRITE_STATUS_BASE 0x0110
+#define CMD_Q_ABORT_BASE 0x0114
+#define CMD_Q_AX_CACHE_BASE 0x0118
+
+#define CMD_CONFIG_OFFSET 0x1120
+#define CMD_CLK_GATE_CTL_OFFSET 0x6004
+
+/* Address offset for virtual queue registers */
+#define CMD_Q_STATUS_INCR 0x1000
+
+/* Bit masks */
+#define CMD_DESC_DW0_VAL 0x500012
+#define CMD_CONFIG_REQID 0x0
+#define CMD_CONFIG_VHB_EN 0x00000001
+#define CMD_QUEUE_PRIO 0x00000006
+#define CMD_TIMEOUT_DISABLE 0x00000000
+#define CMD_CLK_DYN_GATING_EN 0x1
+#define CMD_CLK_DYN_GATING_DIS 0x0
+#define CMD_CLK_HW_GATE_MODE 0x1
+#define CMD_CLK_SW_GATE_MODE 0x0
+#define CMD_CLK_GATE_ON_DELAY 0x1000
+#define CMD_CLK_GATE_CTL 0x0
+#define CMD_CLK_GATE_OFF_DELAY 0x1000
+
+#define CMD_CLK_GATE_CONFIG (CMD_CLK_GATE_CTL | \
+ CMD_CLK_HW_GATE_MODE | \
+ CMD_CLK_GATE_ON_DELAY | \
+ CMD_CLK_DYN_GATING_EN | \
+ CMD_CLK_GATE_OFF_DELAY)
+
+#define CMD_Q_RUN 0x1
+#define CMD_Q_HALT 0x2
+#define CMD_Q_MEM_LOCATION 0x4
+#define CMD_Q_SIZE 0x1F
+#define CMD_Q_SHIFT 3
+#define QUEUE_SIZE_VAL ((ffs(cmd_queue_length) - 2) & \
+ CMD_Q_SIZE)
+#define Q_PTR_MASK (2 << (QUEUE_SIZE_VAL + 5) - 1)
+#define Q_DESC_SIZE sizeof(struct ptdma_desc)
+#define Q_SIZE(n) (cmd_queue_length * (n))
+
+#define INT_COMPLETION 0x1
+#define INT_ERROR 0x2
+#define INT_QUEUE_STOPPED 0x4
+#define INT_EMPTY_QUEUE 0x8
+#define SUPPORTED_INTERRUPTS (INT_COMPLETION | INT_ERROR)
+
+/****** Local Storage Block ******/
+#define LSB_START 0
+#define LSB_END 127
+#define LSB_COUNT (LSB_END - LSB_START + 1)
+
+#define PT_DMAPOOL_MAX_SIZE 64
+#define PT_DMAPOOL_ALIGN BIT(5)
+
+#define PT_PASSTHRU_BLOCKSIZE 512
+
+struct pt_device;
+
+struct pt_tasklet_data {
+ struct completion completion;
+ struct pt_cmd *cmd;
+};
+
+/*
+ * struct pt_passthru_engine - pass-through operation
+ * without performing DMA mapping
+ * @mask: mask to be applied to data
+ * @mask_len: length in bytes of mask
+ * @src: data to be used for this operation
+ * @dst: data produced by this operation
+ * @src_len: length in bytes of data used for this operation
+ * @final: indicate final pass-through operation
+ *
+ * Variables required to be set when calling pt_enqueue_cmd():
+ * - bit_mod, byte_swap, src, dst, src_len
+ * - mask, mask_len if bit_mod is not PT_PASSTHRU_BITWISE_NOOP
+ */
+struct pt_passthru_engine {
+ dma_addr_t mask;
+ u32 mask_len; /* In bytes */
+
+ dma_addr_t src_dma, dst_dma;
+ u64 src_len; /* In bytes */
+
+ u32 final;
+};
+
+/*
+ * struct pt_cmd - PTDMA operation request
+ * @entry: list element
+ * @work: work element used for callbacks
+ * @pt: PT device to be run on
+ * @ret: operation return code
+ * @flags: cmd processing flags
+ * @engine: PTDMA operation to perform (passthru)
+ * @engine_error: PT engine return code
+ * @passthru: engine specific structures, refer to specific engine struct below
+ * @callback: operation completion callback function
+ * @data: parameter value to be supplied to the callback function
+ *
+ * Variables required to be set when calling pt_enqueue_cmd():
+ * - engine, callback
+ * - See the operation structures below for what is required for each
+ * operation.
+ */
+struct pt_cmd {
+ struct list_head entry;
+ struct work_struct work;
+ struct pt_device *pt;
+ int ret;
+
+ u32 engine;
+ u32 engine_error;
+
+ struct pt_passthru_engine passthru;
+
+ /* Completion callback support */
+ void (*pt_cmd_callback)(void *data, int err);
+ void *data;
+};
+
+struct pt_cmd_queue {
+ struct pt_device *pt;
+
+ /* Queue dma pool */
+ struct dma_pool *dma_pool;
+
+ /* Queue base address (not neccessarily aligned)*/
+ struct ptdma_desc *qbase;
+
+ /* Aligned queue start address (per requirement) */
+ struct mutex q_mutex ____cacheline_aligned;
+ unsigned int qidx;
+
+ unsigned int qsize;
+ dma_addr_t qbase_dma;
+ dma_addr_t qdma_tail;
+
+ unsigned int active;
+ unsigned int suspended;
+
+ /* Register addresses for queue */
+ void __iomem *reg_control;
+ void __iomem *reg_tail_lo;
+ void __iomem *reg_head_lo;
+ void __iomem *reg_int_enable;
+ void __iomem *reg_interrupt_status;
+ void __iomem *reg_status;
+ void __iomem *reg_int_status;
+ void __iomem *reg_dma_status;
+ void __iomem *reg_dma_read_status;
+ void __iomem *reg_dma_write_status;
+ u32 qcontrol; /* Cached control register */
+
+ /* Status values from job */
+ u32 int_status;
+ u32 q_status;
+ u32 q_int_status;
+ u32 cmd_error;
+
+} ____cacheline_aligned;
+
+struct pt_device {
+ struct list_head entry;
+
+ unsigned int ord;
+ char name[MAX_PT_NAME_LEN];
+
+ struct device *dev;
+
+ /* Bus specific device information */
+ struct pt_msix *pt_msix;
+
+ struct pt_dev_vdata *dev_vdata;
+
+ unsigned int pt_irq;
+
+ /* I/O area used for device communication */
+ void __iomem *io_regs;
+
+ spinlock_t cmd_lock ____cacheline_aligned;
+ unsigned int cmd_count;
+ struct list_head cmd;
+
+ /*
+ * The command queue. This represent the queue available on the
+ * PTDMA that are available for processing cmds
+ */
+ struct pt_cmd_queue cmd_q;
+
+ wait_queue_head_t lsb_queue;
+
+ struct tasklet_struct tasklet;
+ struct pt_tasklet_data tdata;
+};
+
+/*
+ * descriptor for PTDMA commands
+ * 8 32-bit words:
+ * word 0: function; engine; control bits
+ * word 1: length of source data
+ * word 2: low 32 bits of source pointer
+ * word 3: upper 16 bits of source pointer; source memory type
+ * word 4: low 32 bits of destination pointer
+ * word 5: upper 16 bits of destination pointer; destination memory type
+ * word 6: reserved 32 bits
+ * word 7: reserved 32 bits
+ */
+
+union dword0 {
+ struct {
+ unsigned int soc:1;
+ unsigned int ioc:1;
+ unsigned int rsvd1:1;
+ unsigned int init:1;
+ unsigned int eom:1;
+ unsigned int function:15;
+ unsigned int engine:4;
+ unsigned int prot:1;
+ unsigned int rsvd2:7;
+ };
+ u32 val;
+};
+
+struct dword3 {
+ unsigned int src_hi:16;
+ unsigned int src_mem:2;
+ unsigned int lsb_cxt_id:8;
+ unsigned int rsvd1:5;
+ unsigned int fixed:1;
+};
+
+struct dword5 {
+ unsigned int dst_hi:16;
+ unsigned int dst_mem:2;
+ unsigned int rsvd1:13;
+ unsigned int fixed:1;
+};
+
+struct ptdma_desc {
+ union dword0 dw0;
+ __le32 length;
+ __le32 src_lo;
+ struct dword3 dw3;
+ __le32 dst_lo;
+ struct dword5 dw5;
+ __le32 rsvd1;
+ __le32 rsvd2;
+};
+
+/* Structure to hold PT device data */
+struct pt_dev_vdata {
+ const unsigned int bar;
+ const unsigned int version;
+};
+
+int pt_core_init(struct pt_device *pt);
+void pt_core_destroy(struct pt_device *pt);
+
+int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
+ struct pt_passthru_engine *pt_engine);
+
+#endif
--
2.7.4