Re: [PATCH] usb: chipidea: host: Disable port power only if previously enabled

[Guenter Roeck]

On Thu, Dec 26, 2019 at 02:46:15PM -0500, Alan Stern wrote:
> On Thu, 26 Dec 2019, Guenter Roeck wrote:
> 
> > On shutdown, ehci_power_off() is called unconditionally to power off
> > each port, even if it was never called to power on the port.
> > For chipidea, this results in a call to ehci_ci_portpower() with a request
> > to power off ports even if the port was never powered on.
> > This results in the following warning from the regulator code.
> 
> That's weird -- we should always power-on every port during hub 
> initialization.
> 
That is what I would have assumed, but test code shows that it doesn't
happen.

> It looks like there's a bug in hub.c:hub_activate(): The line under
> HUB_INIT which calls hub_power_on() should call
> usb_hub_set_port_power() instead.  In fact, the comment near the start

usb_hub_set_port_power() operates on a port of the hub. hub_activate()
operates on the hub itself, or at least I think it does. I don't know
how to convert the calls. Also, there are more calls to hub_power_on()
in the same function.  Can you provide more details on what to do,
or even better a patch for me to test ?

Thanks,
Guenter

> of hub_power_on() is wrong.  It says "Enable power on each port", but
> in fact it only enables power for ports that had been powered-on
> previously (i.e., the port's bit in hub->power_bits was set).  
> Apparently this got messed up in commit ad493e5e5805 ("usb: add usb
> port auto power off mechanism").
> 
> Now, the chipidea driver may still need to be updated, because 
> ehci_turn_off_all_ports() will still be called during shutdown and it 
> will try to power-down all ports, even those which are already powered 
> down (for example, because the port is suspended).
> 
> Alan Stern
>