Re: [PATCH 1/3] arm64: dts: sc7180: Add Venus video codec DT node

[Bjorn Andersson]

On Thu 19 Dec 23:59 PST 2019, Dikshita Agarwal wrote:

> This adds Venus video codec DT node for sc7180.
> 
> Signed-off-by: Dikshita Agarwal <dikshita@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6876aae2..42c70f5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -10,6 +10,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/phy/phy-qcom-qusb2.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/clock/qcom,videocc-sc7180.h>
>  
>  / {
>  	interrupt-parent = <&intc>;
> @@ -66,6 +67,11 @@
>  			compatible = "qcom,cmd-db";
>  			no-map;
>  		};
> +
> +		venus_mem: memory@8F600000 {
> +			reg = <0 0x8F600000 0 0x500000>;
> +			no-map;
> +		};
>  	};
>  
>  	cpus {
> @@ -1042,6 +1048,36 @@
>  			};
>  		};
>  
> +		venus: video-codec@aa00000 {
> +			compatible = "qcom,sc7180-venus";
> +			reg = <0 0x0aa00000 0 0xff000>;
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +			power-domains = <&videocc VENUS_GDSC>,

Should this be aligned with the DT refactoring done for sdm845, where
the GDSC is moved into the *-core subnodes etc?

Regards,
Bjorn

> +					<&videocc VCODEC0_GDSC>;
> +			power-domain-names = "venus", "vcodec0";
> +			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
> +				<&videocc VIDEO_CC_VENUS_AHB_CLK>,
> +				<&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
> +				<&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
> +				<&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
> +			clock-names = "core", "iface", "bus",
> +					"vcodec0_core", "vcodec0_bus";
> +			iommus = <&apps_smmu 0x0C00 0x60>;
> +			memory-region = <&venus_mem>;
> +
> +			video-core0 {
> +					compatible = "venus-decoder";
> +			};
> +
> +			video-core1 {
> +					compatible = "venus-encoder";
> +			};
> +
> +			video-firmware {
> +					iommus = <&apps_smmu 0x0C42 0x0>;
> +			};
> +		};
> +
>  		pdc: interrupt-controller@b220000 {
>  			compatible = "qcom,sc7180-pdc", "qcom,pdc";
>  			reg = <0 0x0b220000 0 0x30000>;
> -- 
> 1.9.1
>