Re: [PATCH] PCI/PM: Report runtime wakeup is not supported if bridge isn't bound to driver

[Kai-Heng Feng]

> On Dec 30, 2019, at 06:37, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
> 
> On Friday, December 27, 2019 6:15:26 PM CET Kai-Heng Feng wrote:
>> 
>>> On Dec 27, 2019, at 18:36, Rafael J. Wysocki <rjw@xxxxxxxxxxxxx> wrote:
>>> 
>>> On Friday, December 27, 2019 10:24:05 AM CET Kai-Heng Feng wrote:
>>>> We have a Pericom USB add-on card that has three USB controller
>>>> functions 06:00.[0-2], connected to bridge device 05:03.0, which is
>>>> connected to another bridge device 04:00.0:
>>>> 
>>>> -[0000:00]-+-00.0
>>>>          +-1c.6-[04-06]----00.0-[05-06]----03.0-[06]--+-00.0
>>>>          |                                            +-00.1
>>>>          |                                            \-00.2
>>>> 
>>>> When bridge device (05:03.0) and all three USB controller functions
>>>> (06:00.[0-2]) are runtime suspended, they don't get woken up by plugging
>>>> USB devices into the add-on card.
>>>> 
>>>> This is because the pcieport driver failed to probe on 04:00.0, since
>>>> the device supports neither legacy IRQ, MSI nor MSI-X. Because of that,
>>>> there's no native PCIe PME can work for devices connected to it.
>>> 
>>> But in that case the PME driver (drivers/pci/pcie/pme.c) should not bind
>>> to the port in question, so the "can_wakeup" flag should not be set for
>>> the devices under that port.
>> 
>> We can remove the can_wakeup flag for all its child devices once pcieport probe fails, but I think it's not intuitive.
>> 
>>> 
>>>> So let's correctly report runtime wakeup isn't supported when any of
>>>> PCIe bridges isn't bound to pcieport driver.
>>>> 
>>>> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981
>>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>>>> ---
>>>> drivers/pci/pci.c | 12 ++++++++++++
>>>> 1 file changed, 12 insertions(+)
>>>> 
>>>> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
>>>> index 951099279192..ca686cfbd65e 100644
>>>> --- a/drivers/pci/pci.c
>>>> +++ b/drivers/pci/pci.c
>>>> @@ -2493,6 +2493,18 @@ bool pci_dev_run_wake(struct pci_dev *dev)
>>>> 	if (!pci_pme_capable(dev, pci_target_state(dev, true)))
>>>> 		return false;
>>>> 
>>>> +	/* If any upstream PCIe bridge isn't bound to pcieport driver, there's
>>>> +	 * no IRQ for PME.
>>>> +	 */
>>>> +	if (pci_is_pcie(dev)) {
>>>> +		while (bus->parent) {
>>>> +			if (!bus->self->driver)
>>>> +				return false;
>>>> +
>>>> +			bus = bus->parent;
>>>> +		}
>>>> +	}
>>>> +
>>> 
>>> So it looks like device_can_wakeup() returns 'true' for this device, but it
>>> should return 'false'.
>> 
>> The USB controllers can assert PME#, so it actually can wakeup, in a way.
> 
> Well, that's questionable.
> 
> If there is no known way for the PME to be signaled, we may as well mark the
> device as wakeup-incapable.

Ok. Reasonable.

> 
>> I think the logical distinction between pci_dev_run_wake() and device_can_wakeup() is that,
>> pci_dev_run_wake() means it can actually do runtime wakeup, while device_can_wakeup()
>> only means it has the capability to wakeup. Am I correct here?
> 
> Kind of, but the "capability" part is not well defined, so to speak, because
> if the device happens to be located below a PCIe port in a low-power state
> (say D3hot), the PME "support" declared in the config space is clearly
> insufficient.

Ok.

> 
>>> 
>>> Do you know why the "can_wakeup" flag is set for it?
>> 
>> All PCI devices with PME cap calls device_set_wakeup_capable() in pci_pm_init().
> 
> Right, I forgot about that thing.
> 
> It is inconsistent with the rest of the code, particularly with
> pci_dev_run_wake(), so I'd try to drop it.
> 
> IIRC that would require some other pieces of code to be reworked to avoid
> regressions, though.

Ok. So I'll work on a v2 patch on top of your change.

> 
>>> 
>>>> 	if (device_can_wakeup(&dev->dev))
>>>> 		return true;
>>>> 
>>>> 
>>> 
>>> Moreover, even if the native PME is not supported, there can be an ACPI GPE (or
>>> equivalent) that triggers when WAKE# is asserted by one of the PCIe devices
>>> connected to it, so the test added by this patch cannot be used in general.
>> 
>> Ok. So how to know when both native PME isn't supported and it doesn't use ACPI GPE?
> 
> If the PME driver doesn't bind to the device's root port, the native PME cannot
> work.
> 
> If there is no wakeup GPE, pci_acpi_setup() will not call
> device_set_wakeup_capable() for the device.

Thanks for the info. Does adding a check on adev->wakeup.flags.valid sufficiently cover all cases for this patch?

> 
>> I thought ACPI GPE only works for devices directly connect to Root Complex, but I can't find the reference now.
> 
> No, that's not the case.
> 
> It can work for any devices (even old-style PCI, non-PCIe) with PME# connected
> to a dedicated WAKE# pin on the board (which then is represented as an ACPI GPE
> or a GPIO IRQ).

Ok, didn't know that.

> 
>> 
>> Another short-term workaround is to make pci_pme_list_scan() not skip bridge when it's in D3hot:
> 
> No, that would not be safe in general.
> 
> Basically, pci_finish_runtime_suspend() needs to enable wakeup for devices
> that can do PME even though can_wakeup is not set for them, as long as
> pci_pme_list_scan() can reach them.  That should be sufficient to cover
> all of the practically relevant cases.

Understand.

Kai-Heng

> 
> 
>